Skip to main content

Establishment profile

MENNEL MILLING COMPANY

320 FINDLAY STREET, FOSTORIA, OH, 44830
Operated by Mennel Milling Co · 1 of 4 establishments
311211Flour Milling
EIN 344302060

Download as PDF →

OSHA inspections
6
over 51 years
Violations
18
$56,869 in penalties
SVEP
YES
Severe violator program
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.
Accident investigations on record
1 hospitalizations · 1 National Emphasis Program inspections

Summary

MENNEL MILLING COMPANY has accumulated 18 OSHA violations across 6 inspections over 51 years of recorded history, with $56,869 in total assessed penalties.

The establishment sits in the 85th percentile for violations within its industry-state peer group of 41 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 5 months ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

MENNEL MILLING COMPANY appears in OSHA workplace safety and NLRB labor relations records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
6
0.1 / yr · last 51 yrs
Violations
18
0.4 / yr
Penalties
$56,869
$3,159 avg / violation
56% serious44% other
Inspection trigger · referral
3 of 6
Inspection trigger · planned
2 of 6

67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 17 distinct standards shown · 18 citations in this view · $56,869 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A0122$7,655Aug 1974Nov 2017
29 CFR 1910.0146 D05 I11$7,094Mar 2026Mar 2026
29 CFR 1910.0146 C0211$7,094Mar 2026Mar 2026
29 CFR 1910.0146 D0211$7,094Mar 2026Mar 2026
29 CFR 1910.0146 J0211$7,094Mar 2026Mar 2026
29 CFR 1910.0147 C04 II11$7,094Mar 2026Mar 2026
29 CFR 1910.0147 C07 I A11$7,094Mar 2026Mar 2026
29 CFR 1910.0028 B01 I11$6,600Jul 2023Jul 2023
29 CFR 1910.0219 E03 I11$25Aug 1974Aug 1974
29 CFR 1910.0215 A0211$25Aug 1974Aug 1974
29 CFR 1910.0146 D05 II11Mar 2026Mar 2026
29 CFR 1910.0134 D01 III11Mar 2026Mar 2026
29 CFR 1910.0147 D11Mar 2026Mar 2026
29 CFR 1910.0309 A 01101411Aug 1974Aug 1974
29 CFR 1910.0025 D01 X11Aug 1974Aug 1974
29 CFR 1910.0219 F0311Aug 1974Aug 1974
29 CFR 1910.0023 A0111Aug 1974Aug 1974

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

85th

Worse on violations than most other employers in NAICS 3112 within OH. Peer group: 41 employers. This establishment has 18 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
95th
peer median: $7,000
Inspection frequency
88th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
4.5
vs industry
+2.3
TRIR
4.5
vs industry
+1.4

Reported for 22 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.1
BLS SOII 2024
Industry avg DART
2.2
BLS SOII 2024
Self-reported TRIR
4.5
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2
Referral
3
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Aug 2017

Reports
1
Hospitalizations
0
Amputations
1
Eye losses
0

Most frequent event: Caught in running equipment or machinery, unspecified

Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).

Severe injury reports — events

Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.

DateEventBody partOutcome
Aug 17, 2017Caught in running equipment or machinery, unspecifiedFinger(s), fingernail(s), n.e.c.Amputation

Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Aug 17, 2017Amputation,Caught In,Finger,Lockout/Tagout,Roller--Mach/Part,Unguarded11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
5 months ago

Most recent federal enforcement activity recorded 5 months ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for MENNEL MILLING COMPANY. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for MENNEL MILLING COMPANY. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

Company-level in OH — for Mennel Milling Co, not this location alone

Total cases
9
Unfair labor practice
8
Representation (union)
1

National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other Mennel Milling Co locations in the same state.

NLRB cases

National Labor Relations Board cases involving this employer. Includes unfair labor practice (ULP) filings and representation election proceedings. NLRB enforcement is process-driven; no per-case monetary penalty is assessed (remedies are case-by-case backpay orders, posting requirements, election re-runs, etc.). 9 cases · 8 ULP · 1 representation

Case numberTypeFiledClosedStatusRegion
08-CA-364111Unfair labor practiceApr 2025OpenRegion 08, Cleveland, Ohio
08-CA-332013Unfair labor practiceDec 2023Mar 2025ClosedRegion 08, Cleveland, Ohio
08-CA-301972Unfair labor practiceAug 2022May 2024ClosedRegion 08, Cleveland, Ohio
08-CA-265899Unfair labor practiceSep 2020Nov 2020ClosedRegion 08, Cleveland, Ohio
08-CA-237845Unfair labor practiceMar 2019Apr 2020ClosedRegion 08, Cleveland, Ohio
09-RD-235180Representation electionFeb 2019Feb 2019ClosedRegion 09, Cincinnati, Ohio
08-CA-187755Unfair labor practiceNov 2016Dec 2016ClosedRegion 08, Cleveland, Ohio
08-CA-187623Unfair labor practiceNov 2016Dec 2016ClosedRegion 08, Cleveland, Ohio
08-CA-033850Unfair labor practiceNov 2002Jun 2003ClosedRegion 08, Cleveland, Ohio

Source: NLRB case files. Rows shown are those the agency has published. Region numbers (1–31) correspond to NLRB's geographic offices.

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MENNEL MILLING COMPANY. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for MENNEL MILLING COMPANY. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
MENNEL MILLING CO
320 FINDLAY STREET · FOSTORIA, OH, 44830
AirRCRATRINo Violation Identified00View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MENNEL MILLING COMPANY. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2026-01-06Referral99$42,564
2023-05-10Referral1$6,600
2017-08-21Referral11$7,600
1983-05-24Planned0$0
1974-11-15Follow-up0$0
1974-08-08Planned7$105

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

MENNEL MILLING COMPANY is one of 4 establishments rolled up under the parent organization Mennel Milling Co.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Mennel Milling Co across all 4 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in flour milling within OH, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by Mennel Milling Co, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on MENNEL MILLING COMPANY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Mennel Milling Co, which operates 4 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is MENNEL MILLING COMPANY's OSHA violation history?
MENNEL MILLING COMPANY has 6 OSHA inspections on record with 18 violations and $56,869 in total penalties.
How does MENNEL MILLING COMPANY's safety record compare to its industry?
MENNEL MILLING COMPANY operates in the flour milling industry. The industry average Total Recordable Incident Rate (TRIR) is 3.1. MENNEL MILLING COMPANY's self-reported DART rate is 4.52 compared to an industry average of 2.2.