Skip to main content

Establishment profile

GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON

105 GM DRIVE, BEDFORD, IN, 47421
Operated by General Motors · 1 of 543 establishments
326220Rubber and Plastics Hoses and Belting Manufacturing

Download as PDF →

OSHA inspections
9
over 38 years
Violations
63
$52,552 in penalties
Severe violator (proxy)
YES
FastDOL heuristic — not confirmation of formal OSHA SVEP listing.

Summary

GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON has accumulated 63 OSHA violations across 9 inspections over 38 years of recorded history, with $52,552 in total assessed penalties.

The establishment sits in the 97th percentile for violations within its industry-state peer group of 70 employers. Inspection frequency runs at the 94th percentile. The most recent enforcement activity was recorded 17 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON appears in OSHA workplace safety and NHTSA vehicle recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, or CPSC product recalls.

OSHA workplace safety

Inspections
9
0.2 / yr · last 38 yrs
Violations
63
1.7 / yr
Penalties
$52,552
$834 avg / violation
51% serious49% other
Inspection trigger · complaint
6 of 9
Inspection trigger · planned
3 of 9

44% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 38 citations in this view · $44,297 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0022 A0244$4,506Aug 1995Jun 2004
29 CFR 1910.0304 F0433$5,268Aug 1995Jun 2004
29 CFR 1910.0022 A0133$3,850Aug 1995Jul 1998
29 CFR 1910.0242 B22$6,300Aug 1995Sep 1996
29 CFR 1910.0253 B04 III22$4,593Aug 1995Sep 1996
29 CFR 1910.0219 C04 I22$4,593Aug 1995Sep 1996
29 CFR 1910.0023 C0122$2,331Aug 1995Sep 1996
29 CFR 1910.0212 A0122$1,875Sep 1996Jun 2004
29 CFR 1910.0304 A0222$600Aug 1995Sep 1996
29 CFR 1910.0215 B0922$550Aug 1995Jun 2004
29 CFR 1910.1200 F05 I22$100Aug 1995Sep 1996
29 CFR 1910.0108 G06 I22$100Aug 1995Sep 1996
29 CFR 1910.0178 K0122Sep 1996Jun 2004
29 CFR 1910.0179 G01 V22Aug 1995Jun 2004
29 CFR 1910.0135 A0111$2,231Aug 1995Aug 1995
29 CFR 1910.0024 F11$2,231Aug 1995Aug 1995
29 CFR 1910.0219 I0211$2,231Aug 1995Aug 1995
29 CFR 1910.0176 A11$1,000Sep 1996Sep 1996
29 CFR 1910.0212 A0511$1,000Sep 1996Sep 1996
29 CFR 1910.0305 D11$938Jul 1998Jul 1998

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

97th

Worse on violations than nearly every other employer in NAICS 3262 within IN. Peer group: 70 employers. This establishment has 63 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
99th
peer median: $2,803
Inspection frequency
94th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
2.6
BLS SOII 2024
Industry avg DART
1.3
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Complaint
6

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
17 years ago

No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON. Verify directly with Environmental Protection Agency

NHTSA vehicle & equipment recalls

Total campaigns
564
Last 5 years
146
Last 12 months
34
Units affected
91,014,211

Most-recalled component: AIR BAGS. Most recent campaign: 2026-08-13. Source: National Highway Traffic Safety Administration, matched on manufacturer name.

Federal contracts

No federal contracts are recorded to this specific location.

Company-wide — GOVERNMENT OF THE UNITED STATES (across 698 entities)
Obligated (5-yr)
$2.6B
Obligated (all-time)
$17.0B
Awards (all-time)
386,739

Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.

Federal contract activity for the parent corporation. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2009-03-16Complaint0$0
2004-04-23Planned168$6,300
1999-03-23Complaint0$0
1998-01-22Complaint43$2,156
1996-09-03Planned247$29,150
1995-12-06Complaint0$0
1995-07-21Complaint1914$14,946
1993-05-25Planned0$0
1988-02-23Complaint0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON is one of 543 establishments rolled up under the parent organization General Motors.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of General Motors across all 543 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in rubber and plastics hoses and belting manufacturing within IN, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by General Motors, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup General Motors, which operates 543 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON's OSHA violation history?
GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON has 9 OSHA inspections on record with 63 violations and $52,552.25 in total penalties.
How does GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON's safety record compare to its industry?
GENERAL MOTORS CORPORATION GRAY & DUCTILE IRON operates in the rubber and plastics hoses and belting manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6.