Establishment profile
ACME TOOLS
4150 BERKSHIRE LANE NORTH STE 300, MINNEAPOLIS, MN, 55446
Operated by ACME Tools
444130 — Hardware Stores
Summary
ACME TOOLS has accumulated 4 OSHA violations across 2 inspections over 18 years of recorded history, with $5,128 in total assessed penalties.
The establishment sits in the 71st percentile for violations within its industry-state peer group of 707 employers. Inspection frequency runs at the 69th percentile. The most recent enforcement activity was recorded 3 months ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ACME TOOLS appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $5,128 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0030 A01 | 1 | 1 | $3,780 | Jun 2026 | Jun 2026 |
| 29 CFR 1910.0151 C | 1 | 1 | $770 | May 2008 | May 2008 |
| 29 CFR 1910.0242 B | 1 | 1 | $578 | May 2008 | May 2008 |
| 29 CFR 1820.65308 | 1 | 1 | — | May 2008 | May 2008 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 4441 within MN. Peer group: 707 employers. This establishment has 4 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 36 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ACME TOOLS. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 3 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ACME TOOLS. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ACME TOOLS. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ACME TOOLS. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ACME TOOLS. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ACME TOOLS. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2026-06-08 | Planned | 1 | 1 | $3,780 | |
| 2008-04-29 | Planned | 3 | 1 | $1,348 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
ACME TOOLS is one of 1 establishments rolled up under the parent organization ACME Tools.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of ACME Tools across all 1 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in hardware stores within MN, ordered by federal enforcement volume:
- ETTERMAN ENTERPRISES INCWILLMAR — 2 federal enforcement records
- E - C HARDWARE INC DBA RED WING ACE HARDWARERED WING — 1 federal enforcement record
- CAMBRIDGE TRUE VALUE HOME CENTER INCCAMBRIDGE — 1 federal enforcement record
- THE WENNER COMPANYCOLD SPRING — 1 federal enforcement record
- RALEIGHS OF THE PRAIRIE INC DBA RALEIGHS ACE HARDWALBERT LEA — 1 federal enforcement record
- NORTHERN TOOL - EQUIPMENT COMPANY INCDULUTH — 1 federal enforcement record
- GLENCOE FLEET SUPPLY INCGLENCOE — 1 federal enforcement record
- ST FRANCIS MERCANTILE CO DBA TRUE VALUE HARDWAREST FRANCIS — 1 federal enforcement record
- CARLSON HARDWARE COMPANYPRIOR LAKE — 1 federal enforcement record
- NORTHERN TOOL & EQUIPMENT COMPANY INCDULUTH — 1 federal enforcement record
Related searches
- All ACME Tools locationsParent rollup
- Hardware StoresAll employers in this industry
- Employers in MNState-wide enforcement data
- Hardware Stores in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ACME TOOLS from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup ACME Tools.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ACME TOOLS's OSHA violation history?
- ACME TOOLS has 2 OSHA inspections on record with 4 violations and $5,128 in total penalties.
- How does ACME TOOLS's safety record compare to its industry?
- ACME TOOLS operates in the hardware stores industry. The industry average Total Recordable Incident Rate (TRIR) is 2.2. ACME TOOLS's self-reported DART rate is 0 compared to an industry average of 1.