Establishment profile
WESTLAKE TOOL & DIE
1280 MOORE ROAD, AVON, OH, 44011
333515 — Cutting Tool and Machine Tool Accessory Manufacturing
EIN 822668394
Summary
WESTLAKE TOOL & DIE has accumulated 17 OSHA violations across 3 inspections over 47 years of recorded history, with $5,890 in total assessed penalties.
The establishment sits in the 82nd percentile for violations within its industry-state peer group of 226 employers. Inspection frequency runs at the 72nd percentile. The most recent enforcement activity was recorded 9 months ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
WESTLAKE TOOL & DIE appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 17 distinct standards shown · 17 citations in this view · $5,890 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $4,100 | Jan 2026 | Jan 2026 |
| 29 CFR 1910.0217 C03 VIIIA | 1 | 1 | $390 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $390 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 C05 III | 1 | 1 | $330 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0178 P01 | 1 | 1 | $300 | Feb 1990 | Feb 1990 |
| 29 CFR 1910.0309 A 025042 | 1 | 1 | $220 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 C05 I | 1 | 1 | $160 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.1200 H | 1 | 1 | — | Feb 1990 | Feb 1990 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Feb 1990 | Feb 1990 |
| 29 CFR 1910.0217 C03 VII | 1 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 D06 II | 1 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 E01 II | 1 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 G | 1 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 D06 I | 1 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 B04 I | 1 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0217 C03 IVD | 1 | 1 | — | Jul 1979 | Jul 1979 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within OH. Peer group: 226 employers. This establishment has 17 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 52 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for WESTLAKE TOOL & DIE. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 9 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for WESTLAKE TOOL & DIE. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for WESTLAKE TOOL & DIE. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for WESTLAKE TOOL & DIE. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for WESTLAKE TOOL & DIE. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for WESTLAKE TOOL & DIE. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for WESTLAKE TOOL & DIE. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-09-10 | Referral | 1 | 1 | $4,100 | |
| 1990-01-05 | Complaint | 3 | 1 | $300 | |
| 1979-05-30 | Complaint | 13 | 4 | $1,490 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in cutting tool and machine tool accessory manufacturing within OH, ordered by federal enforcement volume:
- KENNAMETAL INC.ORWELL — 3 federal enforcement records
- GREAT LAKES INDUSTRIAL KNIFE CO., INC.AKRON — 1 federal enforcement record
- CARBORUNDUM GRINDING WHEEL COMPANYLOGAN — 1 federal enforcement record
- G. H. METALWERKS, LLCSOLON — 1 federal enforcement record
- KIFFER INDUSTRIESCLEVELAND — 1 federal enforcement record
- FL DISTRIBUTORS INC.CLEVELAND — 1 federal enforcement record
- KENNAMETALSOLON — 1 federal enforcement record
- ALLIED MACHINE WORKS, INC.ZANESVILLE — 1 federal enforcement record
- SPERZEL INC.CLEVELAND — 1 federal enforcement record
- RITEN INDUSTRIES, INC.WASHINGTON COURT HOUSE — 1 federal enforcement record
Related searches
- Cutting Tool and Machine Tool Accessory ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- Cutting Tool and in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on WESTLAKE TOOL & DIE from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is WESTLAKE TOOL & DIE's OSHA violation history?
- WESTLAKE TOOL & DIE has 3 OSHA inspections on record with 17 violations and $5,890 in total penalties.
- How does WESTLAKE TOOL & DIE's safety record compare to its industry?
- WESTLAKE TOOL & DIE operates in the cutting tool and machine tool accessory manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2. WESTLAKE TOOL & DIE's self-reported DART rate is 4.01 compared to an industry average of 0.5.