Establishment profile
SGS TOOL CO.
55 SOUTH MAIN STREET, MUNROE FALLS, OH, 44262
333515 — Cutting Tool and Machine Tool Accessory Manufacturing
Summary
SGS TOOL CO. has accumulated 16 OSHA violations across 3 inspections over 51 years of recorded history, with $210 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 226 employers. Inspection frequency runs at the 73rd percentile. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SGS TOOL CO. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
33% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 16 citations in this view · $210 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0309 A | 2 | 1 | — | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0106 E06 I | 1 | 1 | $30 | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0036 B04 | 1 | 1 | $30 | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0037 Q01 | 1 | 1 | $30 | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0106 E02 IIB0 | 1 | 1 | $30 | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0157 C01 | 1 | 1 | $30 | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0215 A01 | 1 | 1 | $30 | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $30 | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | — | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0023 C01 | 1 | 1 | — | Sep 1974 | Sep 1974 |
| 29 CFR 1904.0002 D01 | 1 | 1 | — | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0157 D01 | 1 | 1 | — | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Sep 1974 | Sep 1974 |
| 29 CFR 1910.0106 E02 IVD0 | 1 | 1 | — | Sep 1974 | Sep 1974 |
| 29 CFR 1904.0002 A | 1 | 1 | — | Sep 1974 | Sep 1974 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within OH. Peer group: 226 employers. This establishment has 16 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for SGS TOOL CO.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SGS TOOL CO.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SGS TOOL CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SGS TOOL CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SGS TOOL CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SGS TOOL CO.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SGS TOOL CO.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 2 facilities · 2 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
SGS TOOL CO 54 S MAIN ST · MUNROE FALLS, OH, 44262 | RCRA | No Violation Identified | 0 | 0 | — | Jun 1998 | View → |
SGS TOOL CO 55 S MAIN ST · MUNROE FALLS, OH, 44262 | RCRA | No Violation Identified | 0 | 0 | — | Jun 1998 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2006-01-27 | Planned | 0 | — | $0 | |
| 1974-12-17 | Follow-up | 0 | — | $0 | |
| 1974-09-09 | Planned | 16 | — | $210 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in cutting tool and machine tool accessory manufacturing within OH, ordered by federal enforcement volume:
- KENNAMETAL INC.ORWELL — 3 federal enforcement records
- CARBORUNDUM GRINDING WHEEL COMPANYLOGAN — 2 federal enforcement records
- G. H. METALWERKS, LLCSOLON — 1 federal enforcement record
- KIFFER INDUSTRIESCLEVELAND — 1 federal enforcement record
- FL DISTRIBUTORS INC.CLEVELAND — 1 federal enforcement record
- KENNAMETALSOLON — 1 federal enforcement record
- ALLIED MACHINE WORKS, INC.ZANESVILLE — 1 federal enforcement record
- SPERZEL INC.CLEVELAND — 1 federal enforcement record
- RITEN INDUSTRIES, INC.WASHINGTON COURT HOUSE — 1 federal enforcement record
- E&J DEMARK, INCWAUSEON — 1 federal enforcement record
Related searches
- Cutting Tool and Machine Tool Accessory ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- Cutting Tool and in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SGS TOOL CO. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SGS TOOL CO.'s OSHA violation history?
- SGS TOOL CO. has 3 OSHA inspections on record with 16 violations and $210 in total penalties.
- How does SGS TOOL CO.'s safety record compare to its industry?
- SGS TOOL CO. operates in the cutting tool and machine tool accessory manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2.