Establishment profile
UNITED MOLD & MACHINE, INC.
39 E. STATE, BARBERTON, OH, 44203
332710 — Machine Shops
Summary
UNITED MOLD & MACHINE, INC. has accumulated 26 OSHA violations across 4 inspections over 52 years of recorded history, with $3,500 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 600 employers. Inspection frequency runs at the 83rd percentile. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
UNITED MOLD & MACHINE, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $3,290 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0215 A04 | 2 | 2 | $139 | Jun 1974 | Apr 1990 |
| 29 CFR 1910.1200 G01 | 1 | 1 | $221 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.1200 H | 1 | 1 | $193 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0037 Q01 | 1 | 1 | $193 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0304 A02 | 1 | 1 | $193 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $193 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0305 B02 | 1 | 1 | $193 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $193 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0106 E02 IVC | 1 | 1 | $166 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0305 G01 II | 1 | 1 | $166 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $166 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0252 E02 III | 1 | 1 | $166 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0184 I09 III | 1 | 1 | $166 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.1200 F04 I | 1 | 1 | $166 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $139 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0212 A05 | 1 | 1 | $139 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0107 C02 | 1 | 1 | $139 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0219 C04 I | 1 | 1 | $139 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0147 C05 IIC | 1 | 1 | $110 | Apr 1990 | Apr 1990 |
| 29 CFR 1910.0157 E03 | 1 | 1 | $110 | Apr 1990 | Apr 1990 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within OH. Peer group: 600 employers. This establishment has 26 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for UNITED MOLD & MACHINE, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for UNITED MOLD & MACHINE, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for UNITED MOLD & MACHINE, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for UNITED MOLD & MACHINE, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for UNITED MOLD & MACHINE, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for UNITED MOLD & MACHINE, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for UNITED MOLD & MACHINE, INC.. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2006-03-29 | Planned | 0 | — | $0 | |
| 1990-03-08 | Complaint | 25 | 22 | $3,500 | |
| 1974-08-02 | Follow-up | 0 | — | $0 | |
| 1974-06-20 | Planned | 1 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within OH, ordered by federal enforcement volume:
- TOTH INDUSTRIES, INC.TOLEDO — 3 federal enforcement records
- WEBSTER INDUSTRIES, INC.TIFFIN — 2 federal enforcement records
- M & M CERTIFIED WELDING, INC.MACEDONIA — 2 federal enforcement records
- ACE PRECISION INDUSTRIES, INC.AKRON — 2 federal enforcement records
- NFM WELDING ENGINEERS INC.MASSILLON — 2 federal enforcement records
- DALTON CORPORATION, STRYKER MACHINING FACILITY CO.STRYKER — 2 federal enforcement records
- MACHINE PRO TECHNOLOGIES, INC.CELINA — 2 federal enforcement records
- XTEK, INC.CINCINNATI — 2 federal enforcement records
- K&K PRECISION, INC.MASON — 2 federal enforcement records
- MC MACHINE LLCCLEVELAND — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in OHState-wide enforcement data
- Machine Shops in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on UNITED MOLD & MACHINE, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is UNITED MOLD & MACHINE, INC.'s OSHA violation history?
- UNITED MOLD & MACHINE, INC. has 4 OSHA inspections on record with 26 violations and $3,500 in total penalties.
- How does UNITED MOLD & MACHINE, INC.'s safety record compare to its industry?
- UNITED MOLD & MACHINE, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.