Establishment profile
XTEK, INC.
11451 READING ROAD, CINCINNATI, OH, 45241
332710 — Machine Shops
EIN 310847969
Summary
XTEK, INC. has accumulated 1 OSHA violation across 2 inspections over 17 years of recorded history, with $3,500 in total assessed penalties.
The establishment sits in the 24th percentile for violations within its industry-state peer group of 608 employers. Inspection frequency runs at the 49th percentile. The most recent enforcement activity was recorded 5 years ago.
Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
XTEK, INC. appears in OSHA workplace safety, WHD wage enforcement, and FMCSA motor carrier registration records only. No matching records were found in MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Peer comparison
Below average violations in NAICS 3327 within OH. Peer group: 608 employers. This establishment has 1 OSHA violation; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 297 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Mar 2016 – Mar 2022 · 2 in last 5 years
Most frequent event: Compressed or pinched by shifting objects or equipment
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Mar 29, 2022 | Compressed or pinched by shifting objects or equipment | Fingertip(s) | Amputation | |
| May 5, 2021 | Compressed or pinched by shifting objects or equipment | Finger(s), fingernail(s), n.e.c. | Amputation | |
| Mar 31, 2016 | Caught in running equipment or machinery during regular operation | Hand(s), unspecified | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| May 5, 2021 | Amputated,Amputation,Crane,Finger,Fingertip,Partial Amputation,Struck Against,Struck By | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 5+ years. Most recent activity: 5 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
Department of Labor Wage & Hour Division — minimum-wage, overtime, child-labor, FMLA, and prevailing-wage enforcement.
Wage and hour cases
Closed DOL Wage & Hour Division cases (FLSA, FMLA, H-2B, MSPA, and related statutes). Backwages reflect amounts the agency assessed; final payment may differ. 1 case · $0 in backwages · 1 worker affected
| Case period | Industry | Backwages | Workers |
|---|---|---|---|
| Nov 2008 – Feb 2009 | All Other Industrial Machinery Manufacturing | — | 1 |
Source: DOL WHD enforcement database. Cases shown reflect those the agency has closed and made public.
Mine safety (MSHA)
No MSHA mine safety violations on file for XTEK, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for XTEK, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for XTEK, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for XTEK, INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for XTEK, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.
- Department of DefenseTRACK WHEEL WITHOUT KEYWAY (IDLER) WHEELcontract · Last action 2013-02-11$109,210
- Department of DefenseSHEAVE WHEEL & BUSHING ASSEMBLYcontract · Last action 2009-06-19$17,795
- Department of DefenseFILAMENTScontract · Last action 2008-09-17$-520
Federal contract dollars to this establishment. Primary NAICS: 333923 - OVERHEAD TRAVELING CRANE, HOIST, AND MONORAIL SYSTEM MANUFACTURING. Last action: 2013-02-11. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2021-05-12 | Referral | 0 | — | $0 | |
| 2016-04-07 | Referral | 1 | 1 | $3,500 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within OH, ordered by federal enforcement volume:
- TOTH INDUSTRIES, INC.TOLEDO — 3 federal enforcement records
- WEBSTER INDUSTRIES, INC.TIFFIN — 2 federal enforcement records
- M & M CERTIFIED WELDING, INC.MACEDONIA — 2 federal enforcement records
- ACE PRECISION INDUSTRIES, INC.AKRON — 2 federal enforcement records
- NFM WELDING ENGINEERS INC.MASSILLON — 2 federal enforcement records
- DALTON CORPORATION, STRYKER MACHINING FACILITY CO.STRYKER — 2 federal enforcement records
- MACHINE PRO TECHNOLOGIES, INC.CELINA — 2 federal enforcement records
- GLUNT INDUSTRIES, INC.WARREN — 2 federal enforcement records
- K&K PRECISION, INC.MASON — 2 federal enforcement records
- MC MACHINE LLCCLEVELAND — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in OHState-wide enforcement data
- Machine Shops in OHIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on XTEK, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is XTEK, INC.'s OSHA violation history?
- XTEK, INC. has 2 OSHA inspections on record with 1 violation and $3,500 in total penalties.
- How does XTEK, INC.'s safety record compare to its industry?
- XTEK, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. XTEK, INC.'s self-reported DART rate is 0.99 compared to an industry average of 1.5.