Establishment profile
TRIANGLE PRECISION INDUSTRIES, INC.
1650 DELCO PARK, DAYTON, OH, 45420
332710 — Machine Shops
Summary
TRIANGLE PRECISION INDUSTRIES, INC. has accumulated 11 OSHA violations across 5 inspections over 25 years of recorded history, with $4,000 in total assessed penalties.
The establishment sits in the 72nd percentile for violations within its industry-state peer group of 607 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TRIANGLE PRECISION INDUSTRIES, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
60% of inspections at this establishment produced violations,
Peer comparison
Above average violations in NAICS 3327 within OH. Peer group: 607 employers. This establishment has 11 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for TRIANGLE PRECISION INDUSTRIES, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TRIANGLE PRECISION INDUSTRIES, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TRIANGLE PRECISION INDUSTRIES, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TRIANGLE PRECISION INDUSTRIES, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TRIANGLE PRECISION INDUSTRIES, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for TRIANGLE PRECISION INDUSTRIES, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TRIANGLE PRECISION INDUSTRIES, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TRIANGLE PRECISION INDUSTRIES, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefensePART #1102-9280, LOCKING RING, 2 1/2-12 UN THREAD ALLOY STELL; PART # 1109276, SPRING STACK, COMPLIANT 90# WAVE SPRING; PART # 1102-9273, STIFF SPRING PRECOMPRESSION ASSY. CUSTOMER SUPPLIED BUSHINGS, MACHINE TO ACCEPT 50 MM BUSHING; PART # 1102-9238, CONE SPACER BRONZE 863; PART # 1102-8891, SLEEVE; PART # 1102-6774, SHAFT; PART # 1105-3751, WHELL MOUNT ASSY STESS RELIEVE PERF HELD TO .001" FLATNESS TO .001" -GRIND PARALLELISM .005"; PART # 1102-6757, WHEEL MOUNT STESS RELIEVE PERP HELD TO .001" FLATNESS TO .001"-GRIND PARALLELISH .005"; PART #1102-8890, SEAL PLATE; PART# 1102-6952 SPACER, HARDENED ALLOY STEEL HARDENED TO 50RC MIN GRIND TO .0005" FLATNESS.contract · Last action 2017-06-28$21,801
- Department of DefenseDUAL CHAMBER HIGHTEMPERATURE WAVEGUIDEcontract · Last action 2014-04-28$19,322
- Department of Defense4510800000!HINGE,DOOR,VEHICULAcontract · Last action 2009-05-13$2,563
Federal contract dollars to this establishment. Primary NAICS: 332721 - PRECISION TURNED PRODUCT MANUFACTURING. Last action: 2017-06-28. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-12-11 | Planned | 1 | — | $500 | |
| 2013-04-10 | Planned | 0 | — | $0 | |
| 2011-08-30 | Planned | 0 | — | $0 | |
| 2005-06-13 | Planned | 1 | — | $0 | |
| 2001-05-03 | Planned | 9 | 8 | $3,500 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within OH, ordered by federal enforcement volume:
- TOTH INDUSTRIES, INC.TOLEDO — 3 federal enforcement records
- WEBSTER INDUSTRIES, INC.TIFFIN — 2 federal enforcement records
- M & M CERTIFIED WELDING, INC.MACEDONIA — 2 federal enforcement records
- ACE PRECISION INDUSTRIES, INC.AKRON — 2 federal enforcement records
- NFM WELDING ENGINEERS INC.MASSILLON — 2 federal enforcement records
- DALTON CORPORATION, STRYKER MACHINING FACILITY CO.STRYKER — 2 federal enforcement records
- MACHINE PRO TECHNOLOGIES, INC.CELINA — 2 federal enforcement records
- XTEK, INC.CINCINNATI — 2 federal enforcement records
- K&K PRECISION, INC.MASON — 2 federal enforcement records
- MC MACHINE LLCCLEVELAND — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in OHState-wide enforcement data
- Machine Shops in OHIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on TRIANGLE PRECISION INDUSTRIES, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is TRIANGLE PRECISION INDUSTRIES, INC.'s OSHA violation history?
- TRIANGLE PRECISION INDUSTRIES, INC. has 5 OSHA inspections on record with 11 violations and $4,000 in total penalties.
- How does TRIANGLE PRECISION INDUSTRIES, INC.'s safety record compare to its industry?
- TRIANGLE PRECISION INDUSTRIES, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.