Establishment profile
THOMPSON TOOL & DIE INC
4060 307TH LN NW, CAMBRIDGE, MN, 55008
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
THOMPSON TOOL & DIE INC has accumulated 12 OSHA violations across 4 inspections over 19 years of recorded history, with $2,305 in total assessed penalties.
The establishment sits in the 83rd percentile for violations within its industry-state peer group of 234 employers. Inspection frequency runs at the 75th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
THOMPSON TOOL & DIE INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 12 citations in this view · $2,305 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0217 F02 | 1 | 1 | $315 | Mar 2007 | Mar 2007 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $315 | Mar 2007 | Mar 2007 |
| 29 CFR 1910.0095 B01 | 1 | 1 | $225 | May 2007 | May 2007 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $225 | May 2007 | May 2007 |
| 29 CFR 5205.011601 | 1 | 1 | $210 | Nov 2013 | Nov 2013 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | $210 | Mar 2007 | Mar 2007 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | $210 | Mar 2007 | Mar 2007 |
| 29 CFR 1910.0217 D09 II | 1 | 1 | $210 | Mar 2007 | Mar 2007 |
| 29 CFR 1910.0147 C07I | 1 | 1 | $158 | Nov 2013 | Nov 2013 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $157 | Mar 2007 | Mar 2007 |
| 29 CFR 5205.120003 | 1 | 1 | $70 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Mar 2007 | Mar 2007 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within MN. Peer group: 234 employers. This establishment has 12 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 35 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for THOMPSON TOOL & DIE INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for THOMPSON TOOL & DIE INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for THOMPSON TOOL & DIE INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for THOMPSON TOOL & DIE INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for THOMPSON TOOL & DIE INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for THOMPSON TOOL & DIE INC. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-10-30 | Planned | 2 | 2 | $368 | |
| 2011-01-21 | Planned | 1 | — | $70 | |
| 2007-05-02 | Referral | 2 | 2 | $450 | |
| 2007-02-20 | Planned | 7 | 6 | $1,417 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within MN, ordered by federal enforcement volume:
- JOSTENS INCEAGAN — 2 federal enforcement records
- TRW AUTOMOTIVE INCWINONA — 2 federal enforcement records
- ERICKSON AUTOMATIC INCISANTI — 1 federal enforcement record
- HOUSEWRIGHT DIES INCMINNEAPOLIS — 1 federal enforcement record
- TRIANGLE DIES AND SUPPLIES INCMINNEAPOLIS — 1 federal enforcement record
- QUALITEK ENGINEERING & MFG INCGOLDEN VALLEY — 1 federal enforcement record
- METRO MOLD & DESIGN LLC - BUILDING 1ROGERS — 1 federal enforcement record
- IN TECH INDUSTRIES INCANOKA — 1 federal enforcement record
- MRG TOOL AND DIE CORPFARIBAULT — 1 federal enforcement record
- DIE CONCEPTS INCELK RIVER — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Special Die and in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on THOMPSON TOOL & DIE INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is THOMPSON TOOL & DIE INC's OSHA violation history?
- THOMPSON TOOL & DIE INC has 4 OSHA inspections on record with 12 violations and $2,304.5 in total penalties.
- How does THOMPSON TOOL & DIE INC's safety record compare to its industry?
- THOMPSON TOOL & DIE INC operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. THOMPSON TOOL & DIE INC's self-reported DART rate is 2.78 compared to an industry average of 1.4.