Establishment profile
MRG TOOL AND DIE CORP
1100 CANNON CIRCLE, FARIBAULT, MN, 55021
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
MRG TOOL AND DIE CORP has accumulated 49 OSHA violations across 8 inspections over 39 years of recorded history, with $7,043 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 237 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MRG TOOL AND DIE CORP appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
88% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $6,743 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0134 A02 | 2 | 2 | $750 | May 2011 | May 2025 |
| 29 CFR 5210.063001 | 2 | 2 | $280 | Mar 1987 | May 1993 |
| 29 CFR 1910.0243 C03 | 1 | 1 | $900 | May 2025 | May 2025 |
| 29 CFR 1910.0107 B05 IV | 1 | 1 | $540 | May 2025 | May 2025 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $525 | Aug 2018 | Aug 2018 |
| 29 CFR 5206.070001 | 1 | 1 | $500 | Apr 2007 | Apr 2007 |
| 29 CFR 1910.1200 H01 | 1 | 1 | $315 | Aug 2018 | Aug 2018 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $315 | Aug 2018 | Aug 2018 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | $315 | Aug 2018 | Aug 2018 |
| 29 CFR 1910.0242 B | 1 | 1 | $315 | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $308 | May 1993 | May 1993 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $252 | May 1993 | May 1993 |
| 29 CFR 1910.1026 L01 | 1 | 1 | $210 | May 2011 | May 2011 |
| 29 CFR 1910.0217 B08 V | 1 | 1 | $210 | May 1993 | May 1993 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $200 | Apr 2007 | Apr 2007 |
| 29 CFR 5205.0870 | 1 | 1 | $180 | May 2025 | May 2025 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | $180 | May 2025 | May 2025 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | $168 | May 1993 | May 1993 |
| 29 CFR 1910.0095 G06 | 1 | 1 | $140 | May 2011 | May 2011 |
| 29 CFR 5206.070001 G | 1 | 1 | $140 | May 2011 | May 2011 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within MN. Peer group: 237 employers. This establishment has 49 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 68 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MRG TOOL AND DIE CORP. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MRG TOOL AND DIE CORP. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MRG TOOL AND DIE CORP. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MRG TOOL AND DIE CORP. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MRG TOOL AND DIE CORP. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MRG TOOL AND DIE CORP. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
MRG TOOL AND DIE 1100 CANNON CIRCLE · FARIBAULT, MN, 55021 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MRG TOOL AND DIE CORP. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-04-10 | Planned | 5 | 3 | $2,340 | |
| 2018-08-06 | Planned | 4 | 4 | $1,470 | |
| 2014-12-09 | Planned | 1 | 1 | $315 | |
| 2011-04-06 | Planned | 4 | 2 | $700 | |
| 2007-03-21 | Planned | 7 | 3 | $1,000 | |
| 1994-01-13 | Follow-up | 0 | — | $0 | |
| 1993-04-19 | Planned | 17 | 2 | $1,218 | |
| 1987-02-10 | Planned | 11 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within MN, ordered by federal enforcement volume:
- JOSTENS INCEAGAN — 2 federal enforcement records
- TRW AUTOMOTIVE INCWINONA — 2 federal enforcement records
- ERICKSON AUTOMATIC INCISANTI — 1 federal enforcement record
- HOUSEWRIGHT DIES INCMINNEAPOLIS — 1 federal enforcement record
- TRIANGLE DIES AND SUPPLIES INCMINNEAPOLIS — 1 federal enforcement record
- QUALITEK ENGINEERING & MFG INCGOLDEN VALLEY — 1 federal enforcement record
- METRO MOLD & DESIGN LLC - BUILDING 1ROGERS — 1 federal enforcement record
- IN TECH INDUSTRIES INCANOKA — 1 federal enforcement record
- ARROWHEAD TOOL AND DESIGN, INC.ANOKA — 1 federal enforcement record
- DIE CONCEPTS INCELK RIVER — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Special Die and in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MRG TOOL AND DIE CORP from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MRG TOOL AND DIE CORP's OSHA violation history?
- MRG TOOL AND DIE CORP has 8 OSHA inspections on record with 49 violations and $7,043 in total penalties.
- How does MRG TOOL AND DIE CORP's safety record compare to its industry?
- MRG TOOL AND DIE CORP operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. MRG TOOL AND DIE CORP's self-reported DART rate is 0 compared to an industry average of 1.4.