Skip to main content

Establishment profile

TANDEM PRODUCTS INC

520 INDUSTRIAL DRIVE, BLOOMING PRAIRIE, MN, 55917
325510Paint and Coating Manufacturing

Download as PDF →

OSHA inspections
12
over 39 years
Violations
29
$7,009 in penalties
Penalties
$7,009
$242 avg

Summary

TANDEM PRODUCTS INC has accumulated 29 OSHA violations across 12 inspections over 39 years of recorded history, with $7,009 in total assessed penalties.

The establishment sits in the 96th percentile for violations within its industry-state peer group of 52 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 11 months ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

TANDEM PRODUCTS INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
12
0.3 / yr · last 39 yrs
Violations
29
0.7 / yr
Penalties
$7,009
$242 avg / violation
52% serious48% other
Inspection trigger · planned
7 of 12
Inspection trigger · complaint
5 of 12

58% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $7,009 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1820.6530221$490Mar 2002Mar 2002
29 CFR 1910.0212 A03 II11$1,680Oct 2025Oct 2025
29 CFR 1910.0106 E06 II11$1,200Oct 2025Oct 2025
29 CFR 1910.0147 C06 I11$720Oct 2025Oct 2025
29 CFR 1910.0106 E09 III11$720Oct 2025Oct 2025
29 CFR 5205.10200111$630Jun 1999Jun 1999
29 CFR 5205.01160211$280Mar 2005Mar 2005
29 CFR 1910.0305 D11$280Mar 2005Mar 2005
29 CFR 1910.0212 A0411$210Dec 2009Dec 2009
29 CFR 5205.06750211$210Mar 2005Mar 2005
29 CFR 1910.0305 B0111$210Mar 2002Mar 2002
29 CFR 1910.0304 F05 V11$210Mar 2002Mar 2002
29 CFR 1910.0304 E 1 V11$99Jan 1987Jan 1987
29 CFR 1910.0305 G01 III11$70Dec 2009Dec 2009
29 CFR 5205.01160111Mar 1990Mar 1990
29 CFR 1910.0252 D 2 IIB11Mar 1990Mar 1990
29 CFR 1910.0178 E0111Mar 1990Mar 1990
29 CFR 1910.0134 A 211Mar 1990Mar 1990
29 CFR 5206.07000211Mar 1990Mar 1990
29 CFR 5206.07000311Mar 1990Mar 1990

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

96th

Worse on violations than nearly every other employer in NAICS 3255 within MN. Peer group: 52 employers. This establishment has 29 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
94th
peer median: $900
Inspection frequency
98th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
2.2
vs industry
+0.5
TRIR
8.9
vs industry
+6.3

Reported for 84 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.6
BLS SOII 2024
Industry avg DART
1.7
BLS SOII 2024
Self-reported TRIR
8.9
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
7
Complaint
5

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TANDEM PRODUCTS INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
11 months ago

Most recent federal enforcement activity recorded 11 months ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for TANDEM PRODUCTS INC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for TANDEM PRODUCTS INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for TANDEM PRODUCTS INC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TANDEM PRODUCTS INC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for TANDEM PRODUCTS INC. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
TANDEM PRODUCTS INC
520 IND US TRIAL DR · BLOOMING PRAIRIE, MN, 55917
AirRCRATRINo Violation Identified00Jan 2020View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Inspection history

DateTriggerViolationsSeriousPenalty
2025-09-23Planned44$4,320
2019-02-20Complaint0$0
2015-10-20Complaint0$0
2009-11-12Planned21$280
2006-07-11Planned0$0
2005-03-08Planned33$770
2002-02-13Planned44$910
1999-04-20Complaint11$630
1998-03-10Complaint0$0
1996-01-16Planned0$0
1990-01-10Complaint6$0
1987-01-12Planned92$99

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in paint and coating manufacturing within MN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on TANDEM PRODUCTS INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is TANDEM PRODUCTS INC's OSHA violation history?
TANDEM PRODUCTS INC has 12 OSHA inspections on record with 29 violations and $7,009 in total penalties.
How does TANDEM PRODUCTS INC's safety record compare to its industry?
TANDEM PRODUCTS INC operates in the paint and coating manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6. TANDEM PRODUCTS INC's self-reported DART rate is 2.23 compared to an industry average of 1.7.