Skip to main content
FastDOL

Establishment profile

SASE COMPANY INC

26423 79TH AVE. S., KENT, WA, 98032
423830 — Industrial Machinery and Equipment Merchant Wholesalers

Download as PDF →

OSHA inspections
1
over 20 years
Violations
8
$550 in penalties
Penalties
$550
$69 avg

Summary

SASE COMPANY INC has accumulated 8 OSHA violations across 1 inspection over 20 years of recorded history, with $550 in total assessed penalties.

The establishment sits in the 80th percentile for violations within its industry-state peer group of 595 employers. The most recent enforcement activity was recorded 20 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

SASE COMPANY INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
1
0.1 / yr · last 20 yrs
Violations
8
0.4 / yr
Penalties
$550
$69 avg / violation
38% serious62% other
Inspection trigger · planned
1 of 1

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 8 distinct standards shown · 8 citations in this view · $550 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 8001.400511$250May 2006May 2006
29 CFR 8064.450211$100May 2006May 2006
29 CFR 8064.500411$100May 2006May 2006
29 CFR 0270.010301 B11$100May 2006May 2006
29 CFR 8636.000511—May 2006May 2006
29 CFR 8001.30200111—May 2006May 2006
29 CFR 8001.700511—May 2006May 2006
29 CFR 8001.900511—May 2006May 2006

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

80th

Worse on violations than most other employers in NAICS 4238 within WA. Peer group: 595 employers. This establishment has 8 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
71st
peer median: $0
Inspection frequency
0th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for SASE COMPANY INC. Verify directly with OSHA Injury Tracking Application →

Industry benchmark

Industry avg TRIR
1.5
BLS SOII 2024
Industry avg DART
0.9
BLS SOII 2024
Self-reported TRIR
—
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SASE COMPANY INC. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
20 years ago

No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for SASE COMPANY INC. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for SASE COMPANY INC. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for SASE COMPANY INC. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SASE COMPANY INC. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for SASE COMPANY INC. Verify directly with Environmental Protection Agency →

Motor carrier safety (FMCSA)

DOT number
514915

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SASE COMPANY INC. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$416K
Awards
65
Top agency
Department of Defense
$256K
Top agencies by obligation (this location)
Department of Defense$256K
General Services Administration$160K
Largest awards (top 50 of 65)
  • Department of Defense
    NEEDLE GUN , DESCALER, PNEUMATIC,
    contract · Last action 2008-05-21
    $38,800
  • Department of Defense
    GUN NEEDLE
    contract · Last action 2008-06-24
    $36,728
  • Department of Defense
    NEEDLE GUN, VON ARX NP23
    contract · Last action 2008-07-11
    $35,260
  • Department of Defense
    SCALER, NEEDLE,
    contract · Last action 2016-02-17
    $23,000
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: TYPE: BRUSH, WIRE, R OTARY, WHEEL FILL MATERIAL: STEEL SPECIAL FEATUR ES: COARSE; SPECIALLY DESIGNED FOR USE WITH VON ARX MODEL NO. FR100 SURFACE CLEANING TOOL. SASE CO. PN: 615.05.03 (PARTIAL DESCRIPTION)
    contract · Last action 2012-05-09
    $21,125
  • Department of Defense
    PARTS
    contract · Last action 2010-04-27
    $19,966
  • Department of Defense
    NEEDLES
    contract · Last action 2016-03-15
    $18,344
  • Department of Defense
    NEEDLE, 3MM CHISEL POINT
    contract · Last action 2012-09-28
    $14,306
  • Department of Defense
    NEEDLES
    contract · Last action 2018-02-16
    $12,000
  • Department of Defense
    ANVIL
    contract · Last action 2011-09-28
    $10,207
  • Department of Defense
    HOLDER,
    contract · Last action 2014-03-24
    $9,502
  • General Services Administration
    CLEANING TOOL, SURFACE PNEUMATIC: CLEANING TOOL, SURFACE, PNEUMATIC FUNCTIONAL DESCRIPTION: USED TO REMOVE TRAFFIC LANE MARKINGS AND PAINT ON AS PHALT AND CONCRETE. GENERAL CHARACTERISTICS: CON SISTS OF ROTATING DRUM WITH LOOSELY MOUNTED FLAI LS AND MOTOR: 1 HP WORKING PRESSURE: 88 PSI OVER ALL DIMENSIONS 10 INCH X 12 INCH X 7-1/2 INCH 15 2 BEAM FLAILS SZ: 3/32 IN. (PARTIAL DESCRIPTION)
    contract · Last action 2009-07-28
    $7,644
  • General Services Administration
    CLEANING TOOL, SURFACE PNEUMATIC: CLEANING TOOL, SURFACE, PNEUMATIC FUNCTIONAL DESCRIPTION: USED T
    contract · Last action 2009-01-30
    $7,644
  • General Services Administration
    CLEANING TOOL, SURFACE PNEUMATIC: CLEANING TOOL, SURFACE, PNEUMATIC FUNCTIONAL DESCRIPTION: USED T
    contract · Last action 2009-01-12
    $7,644
  • Department of Defense
    SCALER
    contract · Last action 2009-07-17
    $7,425
  • Department of Defense
    LOCKING SPRING
    contract · Last action 2013-03-04
    $6,992
  • Department of Defense
    NEEDLES 3MM
    contract · Last action 2013-03-04
    $6,500
  • Department of Defense
    SCALER
    contract · Last action 2010-03-10
    $5,955
  • General Services Administration
    CLEANING TOOL, SURFACE PNEUMATIC: TYPE: CLEANING TOOL, SURFACE PNEUMATIC MOTOR: 1 HP WORKING PRE SS
    contract · Last action 2008-04-23
    $5,895
  • General Services Administration
    CLEANING TOOL, SURFACE PNEUMATIC: TYPE: CLEANING TOOL, SURFACE PNEUMATIC MOTOR: 1 HP WORKING PRE SS
    contract · Last action 2008-03-27
    $5,895
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: TYPE: BRUSH, WIRE, R OTARY, WHEEL FILL MATERIAL: STEEL SPECIAL FEATUR ES: COARSE; SPECIALLY DESIGNED FOR USE WITH VON ARX MODEL NO. FR100 SURFACE CLEANING TOOL. SASE CO. PN: 615.05.03 (PARTIAL DESCRIPTION)
    contract · Last action 2009-10-02
    $5,800
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: TYPE: BRUSH, WIRE, ROTARY, WHEEL FILL MATERIAL: STEEL SPECIAL FEATURES: COARSE; SPECIALLY DESIGNED FOR USE WITH VONARX MODEL NO. FR100 SURFACE CLEANING TOOL. SASECO. PN: 615.05.03 (PARTIAL DESCRIPTION)
    contract · Last action 2009-09-10
    $5,800
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: TYPE: BRUSH, WIRE, R OTARY, WHEEL FILL MATERIAL: STEEL SPECIAL FEATUR ES: COARSE; SPECIALLY DESIGNED FOR USE WITH VON ARX MODEL NO. FR100 SURFACE CLEANING TOOL. SASE CO. PN: 615.05.03 (PARTIAL DESCRIPTION)
    contract · Last action 2009-07-28
    $5,800
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: TYPE: BRUSH, WIRE, R OTARY, WHEEL FILL MATERIAL: STEEL SPECIAL FEATUR ES
    contract · Last action 2009-01-30
    $5,800
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: TYPE: BRUSH, WIRE, R OTARY, WHEEL FILL MATERIAL: STEEL SPECIAL FEATUR ES
    contract · Last action 2009-01-12
    $5,800
  • Department of Defense
    NEEDLES, NEW STYLE 3 MM,
    contract · Last action 2015-11-10
    $4,485
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: VON ARX MODEL NO. FR100. VON ARX PN. 615.05.03 PKG IAW STD COMM PRAC. PK
    contract · Last action 2008-04-23
    $4,324
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: VON ARX MODEL NO. FR100. VON ARX PN. 615.05.03 PKG IAW STD COMM PRAC. PK
    contract · Last action 2008-03-27
    $4,324
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: FILL MATERIAL - STEE L END USE IDENTIFICATION - ESPECIALLY DESIGNED F OR USE WITH VON ARX MODEL FR100 SURFACE CLEANING TOOL SASE CO. PN 615.05.02 (PARTIAL DESCRIPTION )
    contract · Last action 2009-10-02
    $4,250
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: FILL MATERIAL - STEE L END USE IDENTIFICATION - ESPECIALLY DESIGNED F OR USE WITH VON ARX MODEL FR100 SURFACE CLEANING TOOL SASE CO. PN 615.05.02 (PARTIAL DESCRIPTION )
    contract · Last action 2009-09-22
    $4,250
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: FILL MATERIAL - STEE L END USE IDENTIFICATION - ESPECIALLY DESIGNED F OR USE WITH VON ARX MODEL FR100 SURFACE CLEANING TOOL SASE CO. PN 615.05.02 (PARTIAL DESCRIPTION )
    contract · Last action 2009-07-28
    $4,250
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: FILL MATERIAL - STEE L END USE IDENTIFICATION - ESPECIALLY DESIGNED F OR
    contract · Last action 2009-01-30
    $4,250
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: FILL MATERIAL - STEE L END USE IDENTIFICATION - ESPECIALLY DESIGNED F OR
    contract · Last action 2009-01-12
    $4,250
  • Department of Defense
    REPAIR PARTS
    contract · Last action 2016-06-22
    $4,075
  • General Services Administration
    TAS::17 1804::TAS HAMMER, PNEUMATIC, PORTABLE: HANDLE TYPE: PISTOL GRIP DESIGN TYPE: SCALING (NEEDLE) BLOWS PER MI NUTE: 3500 BPM OVERALL LENGTH: 13.2' PSI MAX: 75 -100 NO. OF NEEDLES: 28 MED (OPTIONAL 65 FINE, 1 9 COURSE) (PARTIAL DESCRIPTION)
    contract · Last action 2010-12-03
    $3,880
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: FILL MATERIAL - STEEL END USE IDENTIFICATION - ESPECIALLY DESIGNED FOR U
    contract · Last action 2008-04-23
    $3,243
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: FILL MATERIAL - STEEL END USE IDENTIFICATION - ESPECIALLY DESIGNED FOR U
    contract · Last action 2008-03-27
    $3,243
  • General Services Administration
    HAMMER, PNEUMATIC, PORTABLE: TYPE: HAMMER, PNEUM ATIC, PORTABLE HANDLE TYPE: PISTOL GRIP DESIGN T YPE: SCALING (NEEDLE) BLOWS PER MINUTE: 3500 BPM OVERALL LENGTH: 13.2' PSI MAX: 75-100 NO. OF NE EDLES: 28 MED (OPTIONAL 65 FINE, 19 COURSE) (PAR TIAL DESCRIPTION)
    contract · Last action 2009-10-15
    $2,910
  • General Services Administration
    HAMMER, PNEUMATIC, PORTABLE: TYPE: HAMMER, PNEUM ATIC, PORTABLE HANDLE TYPE: PISTOL GRIP DESIGN T YP
    contract · Last action 2009-04-21
    $2,910
  • General Services Administration
    HAMMER, PNEUMATIC, PORTABLE: TYPE: HAMMER, PNEUM ATIC, PORTABLE HANDLE TYPE: PISTOL GRIP DESIGN T YP
    contract · Last action 2008-05-21
    $2,910
  • General Services Administration
    HAMMER, PNEUMATIC, PORTABLE: TYPE: HAMMER, PNEUM ATIC, PORTABLE HANDLE TYPE: PISTOL GRIP DESIGN T YP
    contract · Last action 2007-10-24
    $2,910
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: TYPE: BRUSH, WIRE, R OTARY, WHEEL FILL MATERIAL: STEEL SPECIAL FEATUR ES: COARSE; SPECIALLY DESIGNED FOR USE WITH VON ARX MODEL NO. FR100 SURFACE CLEANING TOOL. SASE CO. PN: 615.05.03 (PARTIAL DESCRIPTION) SHIP TO: MPC DLA DISTRIBUTION SAN DIEGO RECV 3581 CUMMINGS RD BLDG 3581 SAN DIEGO CA 92136-3581
    contract · Last action 2011-10-31
    $2,320
  • General Services Administration
    HANDLE, SURFACE CLEANING TOOL: HANDLE, SURFACE C LEANING TOOL END ITEM IDENTIFICATION: VON ARX MO DEL FR100 SURFACE CLEANING TOOL SASE CO. PN: 615 .02.00 (PARTIAL DESCRIPTION)
    contract · Last action 2009-09-30
    $2,300
  • General Services Administration
    HANDLE, SURFACE CLEANING TOOL: HANDLE, SURFACE C LEANING TOOL END ITEM IDENTIFICATION: VON ARX MO DEL FR100 SURFACE CLEANING TOOL SASE CO. PN: 615 .02.00 (PARTIAL DESCRIPTION)
    contract · Last action 2009-09-22
    $2,300
  • General Services Administration
    HANDLE, SURFACE CLEANING TOOL: HANDLE, SURFACE C LEANING TOOL END ITEM IDENTIFICATION: VON ARX MO DE
    contract · Last action 2009-01-30
    $2,300
  • General Services Administration
    HANDLE, SURFACE CLEANING TOOL: HANDLE, SURFACE C LEANING TOOL END ITEM IDENTIFICATION: VON ARX MO DE
    contract · Last action 2009-01-12
    $2,300
  • General Services Administration
    HANDLE, SURFACE CLEANING TOOL: HANDLE, SURFACE C LEANING TOOL END ITEM IDENTIFICATION: VON ARX MO DEL FR100 SURFACE CLEANING TOOL SASE CO. PN: 615 .02.00 (PARTIAL DESCRIPTION)
    contract · Last action 2009-07-28
    $2,298
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: FILL MATERIAL - STEE L END USE IDENTIFICATION - ESPECIALLY DESIGNED F OR USE WITH VON ARX MODEL FR100 SURFACE CLEANING TOOL SASE CO. PN 615.05.02 (PARTIAL DESCRIPTION ) SHIP TO: MPC DLA DISTRIBUTION SAN DIEGO RECV 3581 CUMMINGS RD BLDG 3581 SAN DIEGO CA 92136-3581
    contract · Last action 2011-11-01
    $1,700
  • Department of Defense
    PARTS
    contract · Last action 2010-06-09
    $1,654
  • General Services Administration
    HANDLE, SURFACE CLEANING TOOL: END ITEM IDENTIFICATION - USED ON VON ARX MODEL FR100 SURFACE CLEANIN
    contract · Last action 2008-03-27
    $1,067

Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2018-02-16. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2006-04-10Planned83$550

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in industrial machinery and equipment merchant wholesalers within WA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on SASE COMPANY INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is SASE COMPANY INC's OSHA violation history?
SASE COMPANY INC has 1 OSHA inspection on record with 8 violations and $550 in total penalties.
How does SASE COMPANY INC's safety record compare to its industry?
SASE COMPANY INC operates in the industrial machinery and equipment merchant wholesalers industry. The industry average Total Recordable Incident Rate (TRIR) is 1.5.