Establishment profile
N C MACHINERY CO
17025 W VALLEY HWY, TUKWILA, WA, 98188
423830 — Industrial Machinery and Equipment Merchant Wholesalers
Summary
N C MACHINERY CO has accumulated 3 OSHA violations across 4 inspections over 21 years of recorded history, with $720 in total assessed penalties.
The establishment sits in the 48th percentile for violations within its industry-state peer group of 596 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 9 years ago.
Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
N C MACHINERY CO appears in OSHA workplace safety, MSHA mine safety, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 3 distinct standards shown · 3 citations in this view · $720 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 8172.0010 | 1 | 1 | $400 | Oct 2006 | Oct 2006 |
| 29 CFR 0241.500101 | 1 | 1 | $320 | Oct 2004 | Oct 2004 |
| 29 CFR 8172.0005 | 1 | 1 | — | Oct 2006 | Oct 2006 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 4238 within WA. Peer group: 596 employers. This establishment has 3 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for N C MACHINERY CO. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for N C MACHINERY CO. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for N C MACHINERY CO. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
Company-level in WA — for N C MACHINERY CO, not this location alone
Mine Safety & Health Administration — citations issued at mining operations. MSHA records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other N C MACHINERY CO operations in the same state.
MSHA citations
Mine Safety and Health Administration citations. S&S (significant and substantial) marks violations that could reasonably contribute to a serious injury. Negligence rating is MSHA’s operator-culpability assessment (none, low, moderate, high, or reckless disregard). Proposed = assessed at issuance; Paid = post-settlement / appeal. 13 citations · 1S&S · 13 contractor · $1,427 proposed / $1,427 paid.
| Citation | Mine | Date | Section | S&S | Negligence | Proposed | Paid |
|---|---|---|---|---|---|---|---|
| 5107503 | Tenino Thurston, WA contractor: N C Machinery Co | Jan 2026 | — | No | ModNegligence | $168 | $168 |
| 9688282 | Quincy WA Mine Grant, WA contractor: N C Machinery Co | Apr 2024 | — | No | LowNegligence | $164 | $164 |
| 5107501 | Tenino Thurston, WA contractor: N C Machinery Co | Jan 2026 | — | No | ModNegligence | $151 | $151 |
| 5107500 | Tenino Thurston, WA contractor: N C Machinery Co | Jan 2026 | — | No | ModNegligence | $151 | $151 |
| 8881795 | Stilly Sand and Gravel Snohomish, WA contractor: N C Machinery Co | Jun 2016 | — | No | ModNegligence | $114 | $114 |
| 8786244 | Dupont Pit Pierce, WA contractor: N C Machinery Co | Mar 2015 | — | No | ModNegligence | $100 | $100 |
| 8611822 | Kapowsin Quarry Pierce, WA contractor: N C Machinery Co | May 2014 | — | No | ModNegligence | $100 | $100 |
| 8611821 | Kapowsin Quarry Pierce, WA contractor: N C Machinery Co | May 2014 | — | No | ModNegligence | $100 | $100 |
| 7291539 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | Aug 2007 | — | No | ModNegligence | $100 | $100 |
| 7616778 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | Nov 2004 | — | Yes | ModNegligence | $99 | $99 |
| 7606451 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | Mar 2006 | — | No | ModNegligence | $60 | $60 |
| 7606449 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | Mar 2006 | — | No | ModNegligence | $60 | $60 |
| 7282160 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | May 2005 | — | No | ModNegligence | $60 | $60 |
Source: MSHA citation database. “Contractor” annotations indicate the cited party was on-site at the mine but not the mine’s operator -- responsibility attaches to the contractor LLC, not the mine’s owner. Section codes reference 30 CFR (the Mine Safety and Health regulations).
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for N C MACHINERY CO. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for N C MACHINERY CO. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for N C MACHINERY CO. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for N C MACHINERY CO. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of the InteriorPURCHASE USED 2006 CATERPILLAR D8T TRACT TYPE DOZERcontract · Last action 2007-12-17$505,659
- Department of the InteriorPURCHASE ONE 2006 USED 143H MOTOR GRADER 4X4contract · Last action 2007-12-17$296,444
- Department of the InteriorPURCHASE ONE USED 2006 CATERPILLAR 320C LU EXCAVATORcontract · Last action 2007-12-17$179,373
- Department of the InteriorONE MONTH RENTAL OF D8 DOZER INCLUDING DELIVERY AND PICK UP CHARGES.contract · Last action 2007-10-25$18,000
- Department of the InteriorRENTAL OF 7 YARD BUCKET FRONT LOADER FOR 2 WEEKS INCLUDING DELIVERY AND PICK UP.contract · Last action 2007-10-24$11,800
Federal contract dollars to this establishment. Primary NAICS: 423810 - CONSTRUCTION AND MINING (EXCEPT OIL WELL) MACHINERY AND EQUIPMENT MERCHANT WHOLESALERS. Last action: 2007-12-17. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2017-03-22 | Referral | 0 | — | $0 | |
| 2011-04-29 | Referral | 0 | — | $0 | |
| 2006-04-26 | Complaint | 2 | 1 | $400 | |
| 2004-07-28 | Planned | 1 | 1 | $320 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in industrial machinery and equipment merchant wholesalers within WA, ordered by federal enforcement volume:
- OXARC INCSPOKANE — 3 federal enforcement records
- OXARC INCELLENSBURG — 3 federal enforcement records
- OXARC LLCPASCO — 3 federal enforcement records
- OXARC, INC.UNION GAP — 3 federal enforcement records
- OXARC INCWENATCHEE — 3 federal enforcement records
- SHARPE MIXERS INCSEATTLE — 2 federal enforcement records
- SHARPE MIXERS INCSEATTLE — 2 federal enforcement records
- CUMMINS NORTHWEST INCYAKIMA — 2 federal enforcement records
- CATERPILLAR INCSPOKANE — 2 federal enforcement records
- OXARC INCOKANOGAN — 2 federal enforcement records
Related searches
- Industrial Machinery and Equipment Merchant WholesalersAll employers in this industry
- Employers in WAState-wide enforcement data
- Industrial Machinery and in WAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on N C MACHINERY CO from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is N C MACHINERY CO's OSHA violation history?
- N C MACHINERY CO has 4 OSHA inspections on record with 3 violations and $720 in total penalties.
- How does N C MACHINERY CO's safety record compare to its industry?
- N C MACHINERY CO operates in the industrial machinery and equipment merchant wholesalers industry. The industry average Total Recordable Incident Rate (TRIR) is 1.5.