Skip to main content

Establishment profile

NUMATIC FINISHING CORP

3126 C ST NE, AUBURN, WA, 98002
238320Painting and Wall Covering Contractors

Download as PDF →

OSHA inspections
2
over 20 years
Violations
27
$4,800 in penalties
Penalties
$4,800
$178 avg
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.

Summary

NUMATIC FINISHING CORP has accumulated 27 OSHA violations across 2 inspections over 20 years of recorded history, with $4,800 in total assessed penalties.

The establishment sits in the 100th percentile for violations within its industry-state peer group of 3,993 employers. Inspection frequency runs at the 87th percentile. The most recent enforcement activity was recorded 14 years ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

NUMATIC FINISHING CORP appears in OSHA workplace safety, EPA environmental compliance, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
2
0.1 / yr · last 20 yrs
Violations
27
1.4 / yr
Penalties
$4,800
$178 avg / violation
48% serious52% other
Inspection trigger · referral
2 of 2

100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $4,800 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 8635.000522$775Mar 2006May 2012
29 CFR 0243.70050622$775Mar 2006May 2012
29 CFR 0243.70130222$375Mar 2006May 2012
29 CFR 8001.400511$1,125Mar 2006Mar 2006
29 CFR 0243.70090911$400May 2012May 2012
29 CFR 0243.70050511$375Mar 2006Mar 2006
29 CFR 0243.70050211$375Mar 2006Mar 2006
29 CFR 8001.600511$150Mar 2006Mar 2006
29 CFR 8001.605011$150Mar 2006Mar 2006
29 CFR 8001.606511$150Mar 2006Mar 2006
29 CFR 8002.60100111$150Mar 2006Mar 2006
29 CFR 8001.500511May 2012May 2012
29 CFR 0243.30110202 0211May 2012May 2012
29 CFR 8001.602511May 2012May 2012
29 CFR 8421.400511May 2012May 2012
29 CFR 0243.7003050111May 2012May 2012
29 CFR 0270.11010111May 2012May 2012
29 CFR 0243.70090211May 2012May 2012
29 CFR 8001.703011Mar 2006Mar 2006
29 CFR 8001.30200111Mar 2006Mar 2006

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

100th

Worse on violations than nearly every other employer in NAICS 2383 within WA. Peer group: 3,993 employers. This establishment has 27 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
93rd
peer median: $200
Inspection frequency
87th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for NUMATIC FINISHING CORP. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
1.6
BLS SOII 2024
Industry avg DART
1.1
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Referral
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for NUMATIC FINISHING CORP. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
14 years ago

No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for NUMATIC FINISHING CORP. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for NUMATIC FINISHING CORP. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for NUMATIC FINISHING CORP. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for NUMATIC FINISHING CORP. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

EPA inspections
1
Quarters non-compliant
12

EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: Violation Identified.

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
NUMATIC FINISHING CORP
3132 C ST NE · AUBURN, WA, 98002
WaterRCRAViolation Identified
QNCR 12
10Sep 2022View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Motor carrier safety (FMCSA)

DOT number
533112
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Inspection history

DateTriggerViolationsSeriousPenalty
2011-11-09Referral113$1,200
2005-12-14Referral1610$3,600

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in painting and wall covering contractors within WA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on NUMATIC FINISHING CORP from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is NUMATIC FINISHING CORP's OSHA violation history?
NUMATIC FINISHING CORP has 2 OSHA inspections on record with 27 violations and $4,800 in total penalties.
How does NUMATIC FINISHING CORP's safety record compare to its industry?
NUMATIC FINISHING CORP operates in the painting and wall covering contractors industry. The industry average Total Recordable Incident Rate (TRIR) is 1.6.