What is NORTH SHORE STRAPPING COMPANY's OSHA violation history?

NORTH SHORE STRAPPING COMPANY has 2 OSHA inspections on record with 4 violations and $20,000 in total penalties.

How does NORTH SHORE STRAPPING COMPANY's safety record compare to its industry?

NORTH SHORE STRAPPING COMPANY operates in the roofing contractors industry. The industry average Total Recordable Incident Rate (TRIR) is 2.4.

Establishment profile

NORTH SHORE STRAPPING COMPANY

1400 VALLEY BELT ROAD, BROOKLYN HEIGHTS, OH, 44131
238160 — Roofing Contractors

Download as PDF →

OSHA inspections

over 7 years

Violations

$20,000 in penalties

Penalties

$20,000

$5,000 avg

Accident investigations on record

1 National Emphasis Program inspections

Summary

NORTH SHORE STRAPPING COMPANY has accumulated 4 OSHA violations across 2 inspections over 7 years of recorded history, with $20,000 in total assessed penalties.

The establishment sits in the 78th percentile for violations within its industry-state peer group of 14,507 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 16 days ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

NORTH SHORE STRAPPING COMPANY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections

0.3 / yr · last 7 yrs

Violations

0.6 / yr

Penalties

$20,000

$5,000 avg / violation

100% serious0% other

Inspection trigger · complaint

1 of 2

50% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $20,000 in penalties.

CFR section	Citations	Inspections	Total penalty	First cited	Last cited
29 CFR 1926.0453 B02 V	1	1	$8,000	Sep 2018	Sep 2018
29 CFR 1926.0501 B10	1	1	$4,000	Sep 2018	Sep 2018
29 CFR 1926.0502 F01 I	1	1	$4,000	Sep 2018	Sep 2018
29 CFR 1926.0502 H01 IV	1	1	$4,000	Sep 2018	Sep 2018

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

78th

Above average violations in NAICS 2381 within OH. Peer group: 14,507 employers. This establishment has 4 OSHA violations; peer median is 2.

Fewer violationsMore violations

Penalty percentile

95th

peer median: $2,662

Inspection frequency

93rd

peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for NORTH SHORE STRAPPING COMPANY. Verify directly with OSHA Injury Tracking Application →

Industry benchmark

Industry avg TRIR

2.4

BLS SOII 2024

Industry avg DART

1.7

BLS SOII 2024

Self-reported TRIR

—

Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Complaint

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for NORTH SHORE STRAPPING COMPANY. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed

Weekly

First OSHA inspection

—

Most recent activity

16 days ago

Most recent federal enforcement activity recorded 16 days ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for NORTH SHORE STRAPPING COMPANY. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for NORTH SHORE STRAPPING COMPANY. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for NORTH SHORE STRAPPING COMPANY. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for NORTH SHORE STRAPPING COMPANY. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for NORTH SHORE STRAPPING COMPANY. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for NORTH SHORE STRAPPING COMPANY. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)

Obligated (all-time)

$110K

Awards

Top agency

Department of Defense

$97K

Top agencies by obligation (this location)

Department of Defense$97K

General Services Administration$13K

Largest awards (top 50 of 63)

Department of Defense
4513182595!TRUCK,HAND
contract · Last action 2010-01-27
$71,820
Department of Defense
4520182264!BOA
contract · Last action 2012-01-20
$13,101
Department of Defense
STRAPPING
contract · Last action 2019-09-24
$11,800
General Services Administration
TAS::21 2020::TAS STRETCHING/SEALING MACHINE AWARD MADE IAW RFQ#3540-00-269-7457 DATED 7/29/2010 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2010-07-30
$1,857
General Services Administration
TAS::21 2020::TAS STRETCHING/SEALING MACHINE AWARD MADE IAW RFQ#3540-00-269-7457 DATED 7/29/2010 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2010-07-30
$1,857
General Services Administration
TAS::21 2020::TAS STRETCHING/SEALING MACHINE
contract · Last action 2010-04-23
$1,857
General Services Administration
TAS::21 2020::TAS CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. .AWARD MADE IAW RFQ#3540-00-897-8117 DATED 04/12/2010 INCORPORATED AND MADE PART OF THIS AWARD
contract · Last action 2010-09-17
$1,839
General Services Administration
CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ#3540-00-897-8117 DATED 2/14/2011 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2011-03-09
$368
General Services Administration
TAS::97 4930::TAS CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ#3540-00-897-8117 DATED 04/12/2010 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2010-09-24
$368
General Services Administration
TAS::97 4930::TAS CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ#3540-00-897-8117 DATED 04/12/2010 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2010-09-24
$368
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING & P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.-----------
contract · Last action 2010-02-05
$345
General Services Administration
CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION.
contract · Last action 2011-11-15
$184
General Services Administration
CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ# 3540-00-897-8117 DATED 09/14/2011 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2011-10-04
$184
General Services Administration
CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ# 3540-00-897-8117 DATED 09/14/2011 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2011-09-23
$184
General Services Administration
CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ# 3540-00-897-8117 DATED 02/14/2011 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2011-08-18
$184
General Services Administration
CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ#3540-00-897-8117 DATED 02/14/2011 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2011-02-18
$184
General Services Administration
CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ#3540-00-897-8117 DATED 02/14/2011 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2011-02-15
$184
General Services Administration
TAS::97 4930::TAS CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ#3540-00-897-8117 DATED 04/12/2010 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2010-11-09
$184
General Services Administration
TAS::21 2020::TAS CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. AWARD MADE IAW RFQ#3540-00-897-8117 DATED 04/12/2010 INCORPORATED AND MADE PART OF THIS AWARD
contract · Last action 2010-09-17
$184
General Services Administration
TAS::97 4930::TAS CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION.
contract · Last action 2010-05-06
$184
General Services Administration
TAS::21 2020::TAS CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION.
contract · Last action 2010-04-23
$184
General Services Administration
TAS::97 4930::TAS CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION.
contract · Last action 2010-04-23
$184
General Services Administration
CASE, KIT COMPONENTS; THE CASE SHALL BE IN ACCO RDANCE WITH MILITARY SPECIFICATION MIL-S-43104B, DATED FEBRUARY 27, 1968 AND SHALL CONFORM TO PA RAGRAPH 3.3.3 AND DRAWING NUMBER 5-7-65. THE BO X SHALL CONFORM TO THE FOLLOWING DIMESIONS; LEN GTH - 26 1/2 INCHES, WIDTH - 26 1/2 INCHES, HEIG TH - 5 1/4 INCHES, THE BOX SHALL BE SET UP AND N AILED WITH A HINGED COVER, HASP, WITH METAL STRA PS WITH WOOD CLEATS AND SHALL BE DESIGNED TO CON TAIN STEEL STRAPPING IN ACCORDANCE WITH THE TYPE V STRAPPING KIT. THE PACKAGE AND QUANTITY SHAL L BE THE SMAE AS THAT NORMALLY USED BY THE SUPPL IER FOR RETAIL DISTRIBUTION. ******URGENT & COMPELLING***********
contract · Last action 2009-08-20
$184
General Services Administration
SEALER, STEEL STRAPPING, HAND, NON-POWERED; SHAL L BE IAW MIL SPEC MIL-S-43180B, DTD JULY 11, 197 5; LIGHT DUTY, DOUBLE NOTCH, END JAW, HANDLES VE RTICAL TO STRAPPING; SIZE 3/8" STRAPPING, 0.010 TO 0.023" THICK. AWARD MADE IAW RFQ#3540-00-223-8855 DATED 02/15/2011 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2011-02-15
$125
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ#3540-00-234-6741 DATED 02/14/2011 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2011-02-15
$125
General Services Administration
SEALER, STEEL STRAPPING, HAND, NON-POWERED; SHAL L BE IAW MIL SPEC MIL-S-43180B, DTD JULY 11, 197 5; LIGHT DUTY, DOUBLE NOTCH, END JAW, HANDLES VE RTICAL TO STRAPPING; SIZE 3/8" STRAPPING, 0.010 TO 0.023" THICK.
contract · Last action 2011-11-16
$100
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ# 3540-00-234-6741 DATED 08/12/2011 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2011-08-31
$100
General Services Administration
SEALER, STEEL STRAPPING, HAND, NON-POWERED; SHAL L BE IAW MIL SPEC MIL-S-43180B, DTD JULY 11, 197 5; LIGHT DUTY, DOUBLE NOTCH, END JAW, HANDLES VE RTICAL TO STRAPPING; SIZE 3/8" STRAPPING, 0.010 TO 0.023" THICK. AWARD MADE IAW RFQ# 3540-00-223-8855 DATED 08/12/2011 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2011-08-18
$100
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED THE MANU ALLY OPERATED STEEL SRAPPING SEALER IS INTENDED FOR APPLYING 5/8" WIDE, 0.010 TO 0.023 " THICK STRAPPING, GENERALLY USED TO FORM A COMPLETE STE EL STRAP AROUND CRATES AND BOXES, AND FOR BANDIN G MATERIAL OR EQUIPMENT. INDEPENDENT METAL STRAP AWARD MADE IAW RFQ#3540-00-234-6742 DATED 02/15/2011 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2011-02-22
$100
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING & P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.-----------
contract · Last action 2010-03-02
$92
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ#3540-00-234-6741 DATED 3/1/2012 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2012-05-18
$89
General Services Administration
SEALER, STEEL STRAPPING, HAND, NON-POWERED; SHAL L BE IAW MIL SPEC MIL-S-43180B, DTD JULY 11, 197 5; LIGHT DUTY, DOUBLE NOTCH, END JAW, HANDLES VE RTICAL TO STRAPPING; SIZE 3/8" STRAPPING, 0.010 TO 0.023" THICK. AWARD MADE IAW RFQ# 3540-00-223-8855 DATED 04/10/2012 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2012-04-18
$89
General Services Administration
SEALER, STEEL STRAPPING, HAND, NON-POWERED; SHAL L BE IAW MIL SPEC MIL-S-43180B, DTD JULY 11, 197 5; LIGHT DUTY, DOUBLE NOTCH, END JAW, HANDLES VE RTICAL TO STRAPPING; SIZE 3/8" STRAPPING, 0.010 TO 0.023" THICK. AWARD MADE IAW RFQ# 3540-00-223-8855 DATED 04/10/2012 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2012-04-12
$89
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING & P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.-----------
contract · Last action 2009-12-16
$69
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING & P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- IAW EMAIL 6/9/2009 VALID FOR 6 MONTHS
contract · Last action 2009-07-30
$69
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ# 3540-00-234-6741 DATED 10/27/2011 INCORPORATED AND MADE PART OF THIS AWARD L5 ____ SHIP TO ADDRESS__________ MARK FOR USNS HENRY J KAISER T AO 187 BATS WAREHOUSE ATTN LARRY JACKSON 9284 BALBOA AVE M/F SHIP SAN DIEGO CA 92123 US
contract · Last action 2011-10-27
$50
General Services Administration
SEALER, STEEL STRAPPING, HAND, NON-POWERED; SHAL L BE IAW MIL SPEC MIL-S-43180B, DTD JULY 11, 197 5; LIGHT DUTY, DOUBLE NOTCH, END JAW, HANDLES VE RTICAL TO STRAPPING; SIZE 3/8" STRAPPING, 0.010 TO 0.023" THICK. AWARD MADE IAW RFQ#3540-00-223-8855 DATED 02/15/2011 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2011-05-20
$50
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ#3540-00-234-6741 DATED 02/14/2011 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2011-05-13
$50
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ#3540-00-234-6741 DATED 02/14/2011 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2011-02-18
$50
General Services Administration
TAS::97 4930::TAS SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ#3540-00-234-6741 DATED 11/17/2010 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2010-11-19
$50
General Services Administration
TAS::97 4930::TAS SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ#3540-00-234-6741 DATED 11/17/2010 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2010-11-19
$50
General Services Administration
TAS::21 2020::TAS SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING & P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ# 3540-00-234-6741DATED 7-29-10 INCORPORATED AND MADE PART OF THIS AWARD-L2
contract · Last action 2010-09-06
$46
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING & P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.-----------
contract · Last action 2010-03-10
$46
General Services Administration
SEALER, STEEL STRAPPING, HAND, NON-POWERED; SHAL L BE IAW MIL SPEC MIL-S-43180B, DTD JULY 11, 197 5; LIGHT DUTY, DOUBLE NOTCH, END JAW, HANDLES VE RTICAL TO STRAPPING; SIZE 3/8" STRAPPING, 0.010 TO 0.023" THICK. AWARD MADE IAW RFQ# 3540-00-223-8855 DATED 04/10/2012 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2012-05-01
$30
General Services Administration
SEALER, STEEL STRAPPING, HAND, NON-POWERED; SHAL L BE IAW MIL SPEC MIL-S-43180B, DTD JULY 11, 197 5; LIGHT DUTY, DOUBLE NOTCH, END JAW, HANDLES VE RTICAL TO STRAPPING; SIZE 3/8" STRAPPING, 0.010 TO 0.023" THICK. AWARD MADE IAW RFQ# 3540-00-223-8855 DATED 04/10/2012 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2012-04-11
$30
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ# 3540-00-234-6741 DATED 02/29/12 INCORPORATED AND MADE PART OF THIS AWARD L5 __________ SHIP TO ADDRESS _________________ MARK FOR USNS HENRY J KAISER T AO 187 BATS WAREHOUSE ATTN LARRY JACKSON 9284 BALBOA AVE M/F SHIP SAN DIEGO CA 92123 US
contract · Last action 2012-03-06
$30
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ# 3540-00-234-6741 DATED 10/27/2011 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2011-12-14
$25
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ# 3540-00-234-6741 DATED 08/12/2011 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2011-09-30
$25
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ# 3540-00-234-6741 DATED 08/12/2011 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2011-09-14
$25
General Services Administration
SEALER, STEEL STRAPPING, HAND OPERATED; IAW MIL SPEC. MIL-S-43180B, DTD JULY 11, 1975. SEALER SH ALL HAVE THE FOLLOWING CHARACTERISTICS; TYPE II LIGHT DUTY, DOUBLE NOTCK, END JAW, HANDLES VER- TICAL TO STRAPPING. SIZE 2--FOR 1/2 INCH WIDTH STRAPPING AND 0.010 IN. MIN. THICKNESS TO 0.023 IN MAX THICKNESS. COMMERCIAL PACKAGING&P ACKING TO AFFORD ADEQUATE PROTECTION AGAINST PHY SICAL DAMAGE DURING SHIPMENT FROM SUPPLIER TO FIRST RECEIVING ACTIVITYT FROM SUPPLIER TO ORDER ING ACTIVITY.----------- AWARD MADE IAW RFQ# 3540-00-234-6741 DATED 08/12/2011 INCORPORATED AND MADE PART OF THIS AWARD L5
contract · Last action 2011-08-18
$25

Federal contract dollars to this establishment. Primary NAICS: 333924 - INDUSTRIAL TRUCK, TRACTOR, TRAILER, AND STACKER MACHINERY MANUFACTURING. Last action: 2019-09-24. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

Date	Trigger	Violations	Serious	Penalty
2026-06-11	Unprogrammed Emphasis	0	—	$0
2018-08-13	Complaint	4	4	$20,000

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in roofing contractors within OH, ordered by federal enforcement volume:

TREMCO INC.MASSILLON — 2 federal enforcement records
CAMPOPIANO ROOFINGCLEVELAND — 2 federal enforcement records
CAMPOPIANO ROOFING INC.STOW — 2 federal enforcement records
INDUSTRIAL FIRST, INC.WEST CHESTER — 2 federal enforcement records
KALKREUTH ROOFING & SHEET METAL, INC.COLUMBUS — 2 federal enforcement records
LAKESHORE ROOFING LTD.STREETSBORO — 2 federal enforcement records
R&R ROOFING, INC.COLUMBUS — 2 federal enforcement records
INDUSTRIAL ENERGY SYSTEMS INC.LONDON — 2 federal enforcement records
CAMPOPIANO ROOFING CO.NORTH RIDGEVILLE — 2 federal enforcement records
F & W PROPERTIESCOLUMBUS — 2 federal enforcement records