Establishment profile
NATIONAL MACHINERY LLC
161 GREENFIELD ST., TIFFIN, OH, 44883
332721 — Precision Turned Product Manufacturing
Summary
NATIONAL MACHINERY LLC has accumulated 14 OSHA violations across 4 inspections over 52 years of recorded history, with $9,160 in total assessed penalties.
The establishment sits in the 79th percentile for violations within its industry-state peer group of 610 employers. Inspection frequency runs at the 84th percentile. The most recent enforcement activity was recorded 11 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
NATIONAL MACHINERY LLC appears in OSHA workplace safety, EPA environmental compliance, and OFLC visa and labor certification (historical) records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 14 citations in this view · $9,160 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $5,500 | Dec 2012 | Apr 2015 |
| 29 CFR 1910.0309 A | 2 | 1 | — | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0147 D02 | 1 | 1 | $3,500 | Apr 2015 | Apr 2015 |
| 29 CFR 1910.0107 G07 | 1 | 1 | $35 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0134 A02 | 1 | 1 | $35 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $30 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0179 N03 XI | 1 | 1 | $30 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | $30 | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0219 C02 | 1 | 1 | — | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | — | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0025 D01 X | 1 | 1 | — | Feb 1974 | Feb 1974 |
| 29 CFR 1910.0179 F05 | 1 | 1 | — | Feb 1974 | Feb 1974 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3327 within OH. Peer group: 610 employers. This establishment has 14 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 385 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Feb 2015 – Jan 2020
Most frequent event: Caught in running equipment or machinery, unspecified
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Jan 15, 2020 | Compressed or pinched by shifting objects or equipment | Fingertip(s) | Amputation | |
| Feb 21, 2015 | Caught in running equipment or machinery, unspecified | Nonclassifiable | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for NATIONAL MACHINERY LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for NATIONAL MACHINERY LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for NATIONAL MACHINERY LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
Office of Foreign Labor Certification — labor condition applications for H-1B, H-2A, H-2B visa programs. Wage ratio = offered / prevailing wage. Historical data only: DOL ended OFLC Performance Data Disclosure publication in 2026, so the figures above reflect filings through the last ingested cycle and are not being refreshed. Treat as a historical snapshot, not a current signal.
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
NATIONAL MACHINERY LLC 161 GREENFIELD STREET · TIFFIN, OH, 44883 | AirWaterRCRA | No Violation Identified | 2 | 0 | — | Feb 2024 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for NATIONAL MACHINERY LLC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2015-02-26 | Referral | 2 | 2 | $7,000 | |
| 2012-09-28 | Complaint | 1 | 1 | $2,000 | |
| 1974-06-06 | Follow-up | 0 | — | $0 | |
| 1974-01-17 | Planned | 11 | — | $160 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in precision turned product manufacturing within OH, ordered by federal enforcement volume:
- TESSEC MANUFACTURING SERVICES LLCDAYTON — 1 federal enforcement record
- ABRASIVE TECHNOLOGY, INC.LEWIS CENTER — 1 federal enforcement record
- RAYCO MANUFACTURING INC.MASSILLON — 1 federal enforcement record
- MILLAT INDUSTRIES, CORPDAYTON — 1 federal enforcement record
- R.W. SCREW PRODUCTS, INC.MASSILLON — 1 federal enforcement record
- NEW DEMENSION METALS CORP.DAYTON — 1 federal enforcement record
- TRUTEC INDUSTRIES, INC.URBANA — 1 federal enforcement record
- J AND M PRECISION MACHINING,INC.BLANCHESTER — 1 federal enforcement record
- MIDWEST CONNECTOR COMPANYCINCINNATI — 1 federal enforcement record
- CENTRAL STATE ENTERPRISES INC.GALION — 1 federal enforcement record
Related searches
- Precision Turned Product ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- Precision Turned Product in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on NATIONAL MACHINERY LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is NATIONAL MACHINERY LLC's OSHA violation history?
- NATIONAL MACHINERY LLC has 4 OSHA inspections on record with 14 violations and $9,160 in total penalties.
- How does NATIONAL MACHINERY LLC's safety record compare to its industry?
- NATIONAL MACHINERY LLC operates in the precision turned product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.6. NATIONAL MACHINERY LLC's self-reported DART rate is 0.27 compared to an industry average of 1.6.