Establishment profile
MINNESOTA TOOL & DIE WORKS INC
6220 MCKINLEY ST NW, RAMSEY, MN, 55303
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
MINNESOTA TOOL & DIE WORKS INC has accumulated 15 OSHA violations across 2 inspections over 15 years of recorded history, with $5,280 in total assessed penalties.
The establishment sits in the 88th percentile for violations within its industry-state peer group of 234 employers. Inspection frequency runs at the 34th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MINNESOTA TOOL & DIE WORKS INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 15 citations in this view · $5,280 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C06 I | 2 | 2 | $533 | Sep 2010 | Jan 2014 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $875 | Sep 2010 | Sep 2010 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | $875 | Sep 2010 | Sep 2010 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $625 | Sep 2010 | Sep 2010 |
| 29 CFR 5206.100001 | 1 | 1 | $375 | Sep 2010 | Sep 2010 |
| 29 CFR 1910.0147 C04I | 1 | 1 | $375 | Sep 2010 | Sep 2010 |
| 29 CFR 1910.0242 B | 1 | 1 | $375 | Sep 2010 | Sep 2010 |
| 29 CFR 5206.070001 | 1 | 1 | $375 | Sep 2010 | Sep 2010 |
| 29 CFR 1820.65308 | 1 | 1 | $275 | Sep 2010 | Sep 2010 |
| 29 CFR 5206.070001 G | 1 | 1 | $210 | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $158 | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0178 L | 1 | 1 | $125 | Sep 2010 | Sep 2010 |
| 29 CFR 1910.1200 H03 IV | 1 | 1 | $105 | Jan 2014 | Jan 2014 |
| 29 CFR 5206.070001 B | 1 | 1 | — | Sep 2010 | Sep 2010 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within MN. Peer group: 234 employers. This establishment has 15 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for MINNESOTA TOOL & DIE WORKS INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MINNESOTA TOOL & DIE WORKS INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MINNESOTA TOOL & DIE WORKS INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MINNESOTA TOOL & DIE WORKS INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MINNESOTA TOOL & DIE WORKS INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MINNESOTA TOOL & DIE WORKS INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MINNESOTA TOOL & DIE WORKS INC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
MINNESOTA TOOL & DIE WORKS INC 6220 MCKINLEY STREET NW · RAMSEY, MN, 55303 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-12-31 | Planned | 4 | 3 | $630 | |
| 2010-09-14 | Planned | 11 | 9 | $4,650 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within MN, ordered by federal enforcement volume:
- JOSTENS INCEAGAN — 2 federal enforcement records
- TRW AUTOMOTIVE INCWINONA — 2 federal enforcement records
- ERICKSON AUTOMATIC INCISANTI — 1 federal enforcement record
- HOUSEWRIGHT DIES INCMINNEAPOLIS — 1 federal enforcement record
- TRIANGLE DIES AND SUPPLIES INCMINNEAPOLIS — 1 federal enforcement record
- QUALITEK ENGINEERING & MFG INCGOLDEN VALLEY — 1 federal enforcement record
- METRO MOLD & DESIGN LLC - BUILDING 1ROGERS — 1 federal enforcement record
- IN TECH INDUSTRIES INCANOKA — 1 federal enforcement record
- MRG TOOL AND DIE CORPFARIBAULT — 1 federal enforcement record
- DIE CONCEPTS INCELK RIVER — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Special Die and in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MINNESOTA TOOL & DIE WORKS INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MINNESOTA TOOL & DIE WORKS INC's OSHA violation history?
- MINNESOTA TOOL & DIE WORKS INC has 2 OSHA inspections on record with 15 violations and $5,280 in total penalties.
- How does MINNESOTA TOOL & DIE WORKS INC's safety record compare to its industry?
- MINNESOTA TOOL & DIE WORKS INC operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.