Skip to main content

Establishment profile

METRO MOLD & DESIGN LLC - BUILDING 4

20600 COUNTY ROAD 81, ROGERS, MN, 55374
326199All Other Plastics Product Manufacturing

Download as PDF →

OSHA inspections
3
over 15 years
Violations
13
$3,420 in penalties
Penalties
$3,420
$263 avg
Accident investigations on record
11 OSHA follow-ups

Summary

METRO MOLD & DESIGN LLC - BUILDING 4 has accumulated 13 OSHA violations across 3 inspections over 15 years of recorded history, with $3,420 in total assessed penalties.

The establishment sits in the 75th percentile for violations within its industry-state peer group of 489 employers. Inspection frequency runs at the 55th percentile. The most recent enforcement activity was recorded 11 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

METRO MOLD & DESIGN LLC - BUILDING 4 appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.2 / yr · last 15 yrs
Violations
13
0.9 / yr
Penalties
$3,420
$263 avg / violation
69% serious31% other
Inspection trigger · planned
3 of 3

67% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 13 citations in this view · $3,420 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0305 G02 III22$480Jun 2011Apr 2015
29 CFR 1910.0146 G0211$420Apr 2015Apr 2015
29 CFR 1910.0146 K0111$420Apr 2015Apr 2015
29 CFR 1910.0147 C04 I11$420Apr 2015Apr 2015
29 CFR 1910.0147 C06 I11$420Apr 2015Apr 2015
29 CFR 1910.0146 C0111$420Apr 2015Apr 2015
29 CFR 1910.0305 B01 II11$300Apr 2015Apr 2015
29 CFR 1910.0178 L11$240Apr 2015Apr 2015
29 CFR 1910.0242 B11$180Apr 2015Apr 2015
29 CFR 1910.0303 B0211$60Apr 2015Apr 2015
29 CFR 1910.0305 G01 IV11$60Apr 2015Apr 2015
29 CFR 1910.0146 C0411Apr 2015Apr 2015

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

75th

Above average violations in NAICS 3261 within MN. Peer group: 489 employers. This establishment has 13 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
70th
peer median: $1,475
Inspection frequency
55th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for METRO MOLD & DESIGN LLC - BUILDING 4. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
2.8
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for METRO MOLD & DESIGN LLC - BUILDING 4. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
11 years ago

No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for METRO MOLD & DESIGN LLC - BUILDING 4. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for METRO MOLD & DESIGN LLC - BUILDING 4. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for METRO MOLD & DESIGN LLC - BUILDING 4. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for METRO MOLD & DESIGN LLC - BUILDING 4. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for METRO MOLD & DESIGN LLC - BUILDING 4. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for METRO MOLD & DESIGN LLC - BUILDING 4. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2015-03-24Planned129$3,000
2011-06-07Planned0$0
2011-06-07Planned1$420

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in all other plastics product manufacturing within MN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on METRO MOLD & DESIGN LLC - BUILDING 4 from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is METRO MOLD & DESIGN LLC - BUILDING 4's OSHA violation history?
METRO MOLD & DESIGN LLC - BUILDING 4 has 3 OSHA inspections on record with 13 violations and $3,420 in total penalties.
How does METRO MOLD & DESIGN LLC - BUILDING 4's safety record compare to its industry?
METRO MOLD & DESIGN LLC - BUILDING 4 operates in the all other plastics product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.