Establishment profile
MACHINE PRODUCTS CORP
5660 WEBSTER ST., DAYTON, OH, 45414
332710 — Machine Shops
Summary
MACHINE PRODUCTS CORP has accumulated 25 OSHA violations across 4 inspections over 51 years of recorded history, with $5,355 in total assessed penalties.
The establishment sits in the 91st percentile for violations within its industry-state peer group of 608 employers. Inspection frequency runs at the 84th percentile. The most recent enforcement activity was recorded 14 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MACHINE PRODUCTS CORP appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $5,355 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C06 I | 1 | 1 | $875 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $875 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0147 D03 | 1 | 1 | $875 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0147 D04 I | 1 | 1 | $875 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $875 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0242 B | 1 | 1 | $700 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0252 E02 III | 1 | 1 | $80 | Mar 1975 | Mar 1975 |
| 29 CFR 1904.0002 A | 1 | 1 | $50 | Mar 1975 | Mar 1975 |
| 29 CFR 1904.0005 A | 1 | 1 | $50 | Mar 1975 | Mar 1975 |
| 29 CFR 1904.0004 | 1 | 1 | $50 | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0107 B05 I | 1 | 1 | $25 | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0107 D05 | 1 | 1 | $25 | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0309 A 011017 | 1 | 1 | — | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0309 A 025045 | 1 | 1 | — | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0022 D01 | 1 | 1 | — | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0157 A02 | 1 | 1 | — | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0157 A06 | 1 | 1 | — | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0178 A06 | 1 | 1 | — | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0179 B05 | 1 | 1 | — | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0213 P04 | 1 | 1 | — | Mar 1975 | Mar 1975 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within OH. Peer group: 608 employers. This establishment has 25 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for MACHINE PRODUCTS CORP. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MACHINE PRODUCTS CORP. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MACHINE PRODUCTS CORP. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MACHINE PRODUCTS CORP. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MACHINE PRODUCTS CORP. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MACHINE PRODUCTS CORP. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MACHINE PRODUCTS CORP. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MACHINE PRODUCTS CORP. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2011-10-12 | Programmed Related | 0 | — | $0 | |
| 2007-09-21 | Planned | 6 | 6 | $5,075 | |
| 2002-02-27 | Planned | 0 | — | $0 | |
| 1975-03-17 | Planned | 19 | — | $280 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within OH, ordered by federal enforcement volume:
- TOTH INDUSTRIES, INC.TOLEDO — 3 federal enforcement records
- DALTON CORPORATION, STRYKER MACHINING FACILITY CO.STRYKER — 2 federal enforcement records
- GLUNT INDUSTRIES, INC.WARREN — 2 federal enforcement records
- K&K PRECISION, INC.MASON — 2 federal enforcement records
- NFM WELDING ENGINEERS INC.MASSILLON — 2 federal enforcement records
- ACE PRECISION INDUSTRIES, INC.AKRON — 2 federal enforcement records
- MACHINE PRO TECHNOLOGIES, INC.CELINA — 2 federal enforcement records
- XTEK, INC.CINCINNATI — 2 federal enforcement records
- M & M CERTIFIED WELDING, INC.MACEDONIA — 2 federal enforcement records
- WEBSTER INDUSTRIES, INC.TIFFIN — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in OHState-wide enforcement data
- Machine Shops in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MACHINE PRODUCTS CORP from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MACHINE PRODUCTS CORP's OSHA violation history?
- MACHINE PRODUCTS CORP has 4 OSHA inspections on record with 25 violations and $5,355 in total penalties.
- How does MACHINE PRODUCTS CORP's safety record compare to its industry?
- MACHINE PRODUCTS CORP operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.