Skip to main content

Establishment profile

LITE METALS COMPANY

700 N. WALNUT ST., RAVENNA, OH, 44266
Operated by Lite Metals Co
331524Aluminum Foundries (except Die-Casting)
EIN 310836979

Download as PDF →

OSHA inspections
8
over 29 years
Violations
70
$45,777 in penalties
SVEP
YES
Severe violator program
Accident investigations on record
1 hospitalizations · 8 National Emphasis Program inspections

Summary

LITE METALS COMPANY has accumulated 70 OSHA violations across 8 inspections over 29 years of recorded history, with $45,777 in total assessed penalties.

The establishment sits in the 86th percentile for violations within its industry-state peer group of 299 employers. Inspection frequency runs at the 76th percentile. The most recent enforcement activity was recorded 6 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

LITE METALS COMPANY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
8
0.3 / yr · last 29 yrs
Violations
70
2.4 / yr
Penalties
$45,777
$654 avg / violation
63% serious37% other
Inspection trigger · planned
4 of 8
Inspection trigger · complaint
3 of 8

100% of inspections at this establishment produced violations, with 7 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 33 citations in this view · $31,787 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0178 Q0733$800Jul 1997Jan 2004
29 CFR 1910.0212 A0122$5,166Jan 2004Sep 2019
29 CFR 1910.0132 A22$2,550Jul 1997Mar 2008
29 CFR 1910.0157 G0422$2,168Mar 2002Jan 2004
29 CFR 1910.0157 C0122$1,600Jul 1997Mar 2008
29 CFR 1910.0095 B0122$1,500Jul 1997Mar 2008
29 CFR 1910.0147 C04 II22$695Mar 2002Mar 2008
29 CFR 1910.0133 A0122$600Mar 2002Mar 2008
29 CFR 1910.1200 F06 II22$270May 2019Apr 2020
29 CFR 1910.0134 C02 II22Jan 2004Mar 2008
29 CFR 1910.0095 K0122Jul 1997Mar 2008
29 CFR 1910.0132 F0122Jul 1997Mar 2008
29 CFR 1910.0305 G01 IV B11$2,785Sep 2019Sep 2019
29 CFR 1910.0303 B07 I11$2,785Sep 2019Sep 2019
29 CFR 1910.0151 C11$2,785May 2019May 2019
29 CFR 1910.1200 E0111$2,785May 2019May 2019
29 CFR 1910.0212 A03 II11$1,500Mar 2008Mar 2008
5A000111$1,500Mar 2008Mar 2008
29 CFR 1910.0179 J02 III11$1,250Jul 1997Jul 1997
29 CFR 1910.0026 C02 IV11$1,050Mar 2008Mar 2008

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

86th

Worse on violations than most other employers in NAICS 3315 within OH. Peer group: 299 employers. This establishment has 70 OSHA violations; peer median is 12.

Fewer violationsMore violations
Penalty percentile
82nd
peer median: $7,650
Inspection frequency
76th
peer median: 3

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
25.6
vs industry
+21.7
TRIR
25.6
vs industry
+20.4

Reported for 45 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
5.2
BLS SOII 2024
Industry avg DART
3.9
BLS SOII 2024
Self-reported TRIR
25.6
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
4
Complaint
3
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for LITE METALS COMPANY. Verify directly with Occupational Safety and Health Administration

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Oct 6, 2007AMPUTATED,FINGER,BLADE,UNGUARDED,TABLE SAW11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
6 years ago

No federal enforcement activity has been recorded against this establishment in 6+ years. Most recent activity: 6 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for LITE METALS COMPANY. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for LITE METALS COMPANY. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for LITE METALS COMPANY. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for LITE METALS COMPANY. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for LITE METALS COMPANY. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for LITE METALS COMPANY. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2020-02-26Referral21$1,270
2019-04-30Complaint33$10,210
2019-04-30Complaint33$5,569
2010-11-10Planned2$900
2007-09-10Planned2213$10,250
2004-01-06Planned95$4,800
2002-01-24Planned84$2,328
1997-05-07Complaint2115$10,450

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

LITE METALS COMPANY is one of 1 establishments rolled up under the parent organization Lite Metals Co.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Lite Metals Co across all 1 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in aluminum foundries (except die-casting) within OH, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on LITE METALS COMPANY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Lite Metals Co.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is LITE METALS COMPANY's OSHA violation history?
LITE METALS COMPANY has 8 OSHA inspections on record with 70 violations and $45,776.9 in total penalties.
How does LITE METALS COMPANY's safety record compare to its industry?
LITE METALS COMPANY operates in the aluminum foundries (except die-casting) industry. The industry average Total Recordable Incident Rate (TRIR) is 5.2. LITE METALS COMPANY's self-reported DART rate is 25.64 compared to an industry average of 3.9.
LITE METALS COMPANY — OSHA Violations & Safety Record | FastDOL