Establishment profile
K.W. THOMPSON TOOL CO. INC
41 OLD DOVER ROAD, ROCHESTER, NH, 03867
331512 — Steel Investment Foundries
Summary
K.W. THOMPSON TOOL CO. INC has accumulated 2 OSHA violations across 4 inspections over 10 years of recorded history, with $3,610 in total assessed penalties.
The establishment sits in the 18th percentile for violations within its industry-state peer group of 23 employers. Inspection frequency runs at the 41st percentile. The most recent enforcement activity was recorded 6 days ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
K.W. THOMPSON TOOL CO. INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
25% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 2 distinct standards shown · 2 citations in this view · $3,610 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C06 | 1 | 1 | $3,610 | Sep 2016 | Sep 2016 |
| 29 CFR 1910.0303 B02 | 1 | 1 | — | Sep 2016 | Sep 2016 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Fewer violations than most other employers in NAICS 3315 within NH. Peer group: 23 employers. This establishment has 2 OSHA violations; peer median is 23.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for K.W. THOMPSON TOOL CO. INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Apr 2021
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Apr 29, 2021 | Caught in running equipment or machinery during regular operation | Hand(s), unspecified | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Apr 29, 2021 | Bypass,Bypass Guard,Caught Between,Compound Fracture,Crushed,Finger,Fracture,Hand,Jammed,Machine Guarding,Machine operator,Molding Machine,Open Fracture,Pinch Point,Pinched,Point Of Operation,Puncture,Puncture Wound,Reaching In,Safety Device,Wrist | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
Most recent federal enforcement activity recorded 6 days ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for K.W. THOMPSON TOOL CO. INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for K.W. THOMPSON TOOL CO. INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for K.W. THOMPSON TOOL CO. INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for K.W. THOMPSON TOOL CO. INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for K.W. THOMPSON TOOL CO. INC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2026-08-28 | Referral | 0 | — | $0 | |
| 2022-11-10 | Referral | 0 | — | $0 | |
| 2021-05-05 | Referral | 0 | — | $0 | |
| 2016-07-25 | Complaint | 2 | 1 | $3,610 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in steel investment foundries within NH, ordered by federal enforcement volume:
- HITCHINER MANUFACTURING CO., INC.MILFORD — 2 federal enforcement records
- STURM, RUGER & COMPANY, INC.NEWPORT — 2 federal enforcement records
- WYMAN-GORDON INVESTMENT CASTINGS, INC.TILTON — 1 federal enforcement record
Related searches
- Steel Investment FoundriesAll employers in this industry
- Employers in NHState-wide enforcement data
- Steel Investment Foundries in NHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on K.W. THOMPSON TOOL CO. INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is K.W. THOMPSON TOOL CO. INC's OSHA violation history?
- K.W. THOMPSON TOOL CO. INC has 4 OSHA inspections on record with 2 violations and $3,610 in total penalties.
- How does K.W. THOMPSON TOOL CO. INC's safety record compare to its industry?
- K.W. THOMPSON TOOL CO. INC operates in the steel investment foundries industry. The industry average Total Recordable Incident Rate (TRIR) is 4.