Skip to main content

Establishment profile

JONCO DIE COMPANY INC

5201 PROGRAM AVE, SAINT PAUL, MN, 55112
333514Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

Download as PDF →

OSHA inspections
5
over 22 years
Violations
9
$1,330 in penalties
Penalties
$1,330
$148 avg

Summary

JONCO DIE COMPANY INC has accumulated 9 OSHA violations across 5 inspections over 22 years of recorded history, with $1,330 in total assessed penalties.

The establishment sits in the 73rd percentile for violations within its industry-state peer group of 237 employers. Inspection frequency runs at the 83rd percentile. The most recent enforcement activity was recorded 7 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

JONCO DIE COMPANY INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
5
0.2 / yr · last 22 yrs
Violations
9
0.4 / yr
Penalties
$1,330
$148 avg / violation
89% serious11% other
Inspection trigger · planned
5 of 5

60% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 9 distinct standards shown · 9 citations in this view · $1,330 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0132 D0111$400Apr 2016Apr 2016
29 CFR 1910.0147 C04 I11$315Apr 2011Apr 2011
29 CFR 1910.0147 C07 I11$315Apr 2011Apr 2011
29 CFR 1910.0334 A02II11$150Oct 2007Oct 2007
29 CFR 1910.0304 F0411$150Oct 2007Oct 2007
29 CFR 1910.0133 A0111Apr 2016Apr 2016
29 CFR 1910.0132 A11Apr 2016Apr 2016
29 CFR 1910.0138 A11Apr 2016Apr 2016
29 CFR 1910.0147 C06 I11Apr 2011Apr 2011

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

73rd

Above average violations in NAICS 3335 within MN. Peer group: 237 employers. This establishment has 9 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
59th
peer median: $945
Inspection frequency
83rd
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
7.0
vs industry
+5.7
TRIR
8.5
vs industry
+5.7

Reported for 80 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.8
BLS SOII 2024
Industry avg DART
1.4
BLS SOII 2024
Self-reported TRIR
8.5
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
5

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for JONCO DIE COMPANY INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
7 years ago

No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for JONCO DIE COMPANY INC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for JONCO DIE COMPANY INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for JONCO DIE COMPANY INC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for JONCO DIE COMPANY INC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for JONCO DIE COMPANY INC. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for JONCO DIE COMPANY INC. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2018-11-19Planned0$0
2016-03-17Planned44$400
2011-04-14Planned32$630
2007-10-04Planned22$300
2004-04-23Planned0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in special die and tool, die set, jig, and fixture manufacturing within MN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on JONCO DIE COMPANY INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is JONCO DIE COMPANY INC's OSHA violation history?
JONCO DIE COMPANY INC has 5 OSHA inspections on record with 9 violations and $1,330 in total penalties.
How does JONCO DIE COMPANY INC's safety record compare to its industry?
JONCO DIE COMPANY INC operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. JONCO DIE COMPANY INC's self-reported DART rate is 7.05 compared to an industry average of 1.4.