Establishment profile
GENERAL TOOL COMPANY
900 GLENDALE MILFORD, CINCINNATI, OH, 45215
332710 — Machine Shops
EIN 310533100
Summary
GENERAL TOOL COMPANY has accumulated 65 OSHA violations across 18 inspections over 52 years of recorded history, with $41,420 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 605 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 7 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GENERAL TOOL COMPANY appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
61% of inspections at this establishment produced violations, with 8 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 30 citations in this view · $39,110 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 3 | 3 | $1,240 | Apr 1983 | Oct 2001 |
| 29 CFR 1910.0107 B09 | 3 | 3 | $860 | Jul 1982 | Jul 1991 |
| 29 CFR 1910.0107 C06 | 2 | 2 | $2,000 | Apr 1983 | Jul 1991 |
| 29 CFR 1910.0212 A03 II | 2 | 2 | $700 | Apr 1983 | Oct 2001 |
| 29 CFR 1910.0095 A | 2 | 2 | $120 | Jun 1974 | Aug 1982 |
| 29 CFR 1910.0132 A | 2 | 2 | $50 | Dec 1981 | Apr 1983 |
| 29 CFR 1910.0134 B01 | 2 | 2 | — | Jun 1974 | Mar 1980 |
| 29 CFR 1910.0134 B11 | 2 | 2 | — | Jun 1974 | Mar 1980 |
| 29 CFR 1910.0147 E02 I | 1 | 1 | $13,260 | Aug 2019 | Aug 2019 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $6,630 | Aug 2019 | Aug 2019 |
| 29 CFR 1910.1200 H | 1 | 1 | $3,000 | Jul 1991 | Jul 1991 |
| 29 CFR 1910.0037 K02 | 1 | 1 | $2,450 | Jul 1991 | Jul 1991 |
| 29 CFR 1910.1025 L01 I | 1 | 1 | $2,000 | Jul 1991 | Jul 1991 |
| 29 CFR 1910.1025 D02 | 1 | 1 | $1,400 | Jul 1991 | Jul 1991 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,000 | Jul 1991 | Jul 1991 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $1,000 | Jul 1991 | Jul 1991 |
| 29 CFR 1910.1200 G01 | 1 | 1 | $1,000 | Jul 1991 | Jul 1991 |
| 29 CFR 1910.0106 E02 IIB | 1 | 1 | $1,000 | Jul 1991 | Jul 1991 |
| 29 CFR 1910.0147 D03 | 1 | 1 | $700 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | $700 | Jan 2006 | Jan 2006 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within OH. Peer group: 605 employers. This establishment has 65 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 255 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Apr 2019 – May 2020
Most frequent event: Caught in or compressed by equipment or objects, unspecified
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| May 20, 2020 | Other fall to lower level, unspecified | Wrist(s) | Hospitalized | |
| Apr 16, 2019 | Caught in or compressed by equipment or objects, unspecified | Finger(s), fingernail(s), unspecified | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Apr 16, 2019 | Amputated,Belt,Cover,Fingertip | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL TOOL COMPANY. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GENERAL TOOL COMPANY. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GENERAL TOOL COMPANY. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GENERAL TOOL COMPANY. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GENERAL TOOL COMPANY. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 2 facilities · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
GENERAL TOOL COMPANY 900 GLENDALE-MILFORD RD · WOODLAWN, OH, 45215 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
GENERAL TOOL COMPANY 101 LANDY LN · CINCINNATI, OH, 45215 | AirRCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal contracts
This location
Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2026-05-06. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-04-24 | Referral | 6 | 6 | $19,890 | |
| 2011-01-12 | Planned | 0 | — | $0 | |
| 2011-01-12 | Planned | 0 | — | $0 | |
| 2006-01-20 | Planned | 4 | 4 | $2,800 | |
| 2001-10-23 | Planned | 2 | 1 | $1,400 | |
| 1991-06-17 | Complaint | 14 | 11 | $16,150 | |
| 1984-05-29 | Complaint | 0 | — | $0 | |
| 1983-11-14 | Complaint | 1 | — | $140 | |
| 1983-08-02 | Complaint | 0 | — | $0 | |
| 1983-04-07 | Complaint | 6 | 3 | $550 | |
| 1983-04-07 | Complaint | 1 | — | $60 | |
| 1982-06-22 | Complaint | 8 | 1 | $120 | |
| 1981-12-17 | Complaint | 0 | — | $0 | |
| 1981-12-15 | Complaint | 8 | 2 | $280 | |
| 1980-02-05 | Complaint | 6 | — | $0 | |
| 1977-03-10 | Complaint | 0 | — | $0 | |
| 1974-08-28 | Follow-up | 0 | — | $0 | |
| 1974-06-17 | Planned | 9 | — | $30 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within OH, ordered by federal enforcement volume:
- TOTH INDUSTRIES, INC.TOLEDO — 3 federal enforcement records
- DALTON CORPORATION, STRYKER MACHINING FACILITY CO.STRYKER — 2 federal enforcement records
- GLUNT INDUSTRIES, INC.WARREN — 2 federal enforcement records
- K&K PRECISION, INC.MASON — 2 federal enforcement records
- NFM WELDING ENGINEERS INC.MASSILLON — 2 federal enforcement records
- ACE PRECISION INDUSTRIES, INC.AKRON — 2 federal enforcement records
- MACHINE PRO TECHNOLOGIES, INC.CELINA — 2 federal enforcement records
- XTEK, INC.CINCINNATI — 2 federal enforcement records
- M & M CERTIFIED WELDING, INC.MACEDONIA — 2 federal enforcement records
- WEBSTER INDUSTRIES, INC.TIFFIN — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in OHState-wide enforcement data
- Machine Shops in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GENERAL TOOL COMPANY from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GENERAL TOOL COMPANY's OSHA violation history?
- GENERAL TOOL COMPANY has 18 OSHA inspections on record with 65 violations and $41,420 in total penalties.
- How does GENERAL TOOL COMPANY's safety record compare to its industry?
- GENERAL TOOL COMPANY operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. GENERAL TOOL COMPANY's self-reported DART rate is 3.43 compared to an industry average of 1.5.