Establishment profile
GENERAL MACHINE & FOUNDRY CORP
4 HAMPSHIRE HILLS LN, WILTON, NH, 03086
331524 — Aluminum Foundries (except Die-Casting)
Summary
GENERAL MACHINE & FOUNDRY CORP has accumulated 31 OSHA violations across 6 inspections over 51 years of recorded history, with $1,100 in total assessed penalties.
The establishment sits in the 64th percentile for violations within its industry-state peer group of 23 employers. Inspection frequency runs at the 55th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GENERAL MACHINE & FOUNDRY CORP appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
83% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 25 citations in this view · $1,100 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0022 A01 | 2 | 2 | $160 | Sep 1977 | Jun 2013 |
| 29 CFR 1910.0132 A | 2 | 2 | $160 | Sep 1977 | Mar 1984 |
| 29 CFR 1910.0219 E01 I | 2 | 2 | $25 | Nov 1974 | Aug 1977 |
| 29 CFR 1910.0309 B 037304 | 2 | 2 | — | Aug 1977 | May 1980 |
| 29 CFR 1910.0215 B09 | 2 | 2 | — | Nov 1974 | May 1980 |
| 29 CFR 1910.0303 B01 | 1 | 1 | $680 | Jun 2013 | Jun 2013 |
| 29 CFR 1910.0242 B | 1 | 1 | $50 | Aug 1977 | Aug 1977 |
| 29 CFR 1910.0106 G09 | 1 | 1 | $25 | Nov 1974 | Nov 1974 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | — | Jun 2013 | Jun 2013 |
| 29 CFR 1910.0157 A01 | 1 | 1 | — | May 1980 | May 1980 |
| 29 CFR 1910.0252 A02 IVC | 1 | 1 | — | May 1980 | May 1980 |
| 29 CFR 1910.0157 A03 | 1 | 1 | — | Aug 1977 | Aug 1977 |
| 29 CFR 1910.0036 B08 | 1 | 1 | — | Aug 1977 | Aug 1977 |
| 29 CFR 1910.0309 A 011022 | 1 | 1 | — | Aug 1977 | Aug 1977 |
| 29 CFR 1910.0157 D04 III | 1 | 1 | — | Aug 1977 | Aug 1977 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | — | Aug 1977 | Aug 1977 |
| 29 CFR 1910.0037 F01 | 1 | 1 | — | Aug 1977 | Aug 1977 |
| 29 CFR 1910.0037 Q01 | 1 | 1 | — | Nov 1974 | Nov 1974 |
| 29 CFR 1910.0141 C01 VI | 1 | 1 | — | Nov 1974 | Nov 1974 |
| 29 CFR 1910.0157 A04 | 1 | 1 | — | Nov 1974 | Nov 1974 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3315 within NH. Peer group: 23 employers. This establishment has 31 OSHA violations; peer median is 23.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GENERAL MACHINE & FOUNDRY CORP. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GENERAL MACHINE & FOUNDRY CORP. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL MACHINE & FOUNDRY CORP. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GENERAL MACHINE & FOUNDRY CORP. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GENERAL MACHINE & FOUNDRY CORP. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GENERAL MACHINE & FOUNDRY CORP. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GENERAL MACHINE & FOUNDRY CORP. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GENERAL MACHINE & FOUNDRY CORP. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-06-04 | Planned | 3 | 2 | $680 | |
| 1984-02-09 | Planned | 1 | — | $0 | |
| 1982-02-10 | Planned | 0 | — | $0 | |
| 1980-05-02 | Planned | 4 | — | $0 | |
| 1977-07-22 | Complaint | 11 | 2 | $370 | |
| 1974-10-31 | Planned | 12 | — | $50 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in aluminum foundries (except die-casting) within NH, ordered by federal enforcement volume:
- W H BAGSHAW CO. INC.NASHUA — 2 federal enforcement records
- HEBERT FOUNDRY & MACHINE, INC.LACONIA — 1 federal enforcement record
- FAB-BRAZE CORPORATIONNASHUA — 1 federal enforcement record
- HEMLOCK FOUNDRY CORPORATIONCHARLESTOWN — 1 federal enforcement record
- DIAMOND CASTING AND MACHINE COMPANY, INC.HOLLIS — 1 federal enforcement record
- NU-CAST INCLONDONDERRY — 1 federal enforcement record
- GRANITE STATE CASTINGGREENVILLE — 1 federal enforcement record
Related searches
- Aluminum Foundries (except Die-Casting)All employers in this industry
- Employers in NHState-wide enforcement data
- Aluminum Foundries (except in NHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GENERAL MACHINE & FOUNDRY CORP from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GENERAL MACHINE & FOUNDRY CORP's OSHA violation history?
- GENERAL MACHINE & FOUNDRY CORP has 6 OSHA inspections on record with 31 violations and $1,100 in total penalties.
- How does GENERAL MACHINE & FOUNDRY CORP's safety record compare to its industry?
- GENERAL MACHINE & FOUNDRY CORP operates in the aluminum foundries (except die-casting) industry. The industry average Total Recordable Incident Rate (TRIR) is 5.2.