Establishment profile
DAMCO, INC.
1103 US17, NEW BERN, NC, 28563
332710 — Machine Shops
Summary
DAMCO, INC. has accumulated 6 OSHA violations across 1 inspection over 5 years of recorded history.
The establishment sits in the 37th percentile for violations within its industry-state peer group of 172 employers. The most recent enforcement activity was recorded 5 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DAMCO, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 6 distinct standards shown · 6 citations in this view.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Oct 2020 | Oct 2020 |
| 29 CFR 1910.0179 J02 III | 1 | 1 | — | Oct 2020 | Oct 2020 |
| 29 CFR 1910.0179 J02 IV | 1 | 1 | — | Oct 2020 | Oct 2020 |
| 29 CFR 1910.1026 D01 | 1 | 1 | — | Oct 2020 | Oct 2020 |
| 29 CFR 1910.1026 L02 II | 1 | 1 | — | Oct 2020 | Oct 2020 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Oct 2020 | Oct 2020 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3327 within NC. Peer group: 172 employers. This establishment has 6 OSHA violations; peer median is 8.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DAMCO, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DAMCO, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 5+ years. Most recent activity: 5 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DAMCO, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DAMCO, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DAMCO, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DAMCO, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DAMCO, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DAMCO, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseSPARES DESIGNATION MD-05-01-06 GRATES FOcontract · Last action 2010-07-07$481,502
- Department of Homeland SecurityIGF::OT::IGF OVERHAUL OF QTY 10 EA FINS NSN 2040 99-726-4768 AND QTY 10 EA RUDDERS NSN 2040 01-223-2674.contract · Last action 2024-07-11$209,202
- Department of Homeland SecurityPROPULSION SHAFT REPLACERMENT, PROPELLER REPAIRS IGF::CL,CT::IGFcontract · Last action 2014-04-03$194,715
- Department of Homeland SecurityIGF::OT::IGF OPEN/INSPECT/REPAIR 10EA FINS NSN 2040 99-726-4768 PN F2120901 AND 10EA RUDDERS NSN 2040 01-223-2674 PN 562-001-1.contract · Last action 2017-09-20$168,937
- Department of Homeland SecurityOPEN, INSPECT, REPAIR OF FIN STABILIZER PN F2120901 AND RUDDER PN 562-001-1.contract · Last action 2016-02-03$161,008
- Department of Homeland Security75F-WLR RUDDER, MARINE.contract · Last action 2016-03-24$115,534
- Department of Homeland Security2040-014446315 47' MLB MARINE RUDDERcontract · Last action 2015-03-10$112,023
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (15) STBD RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2019-08-26$107,314
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (15) PORT RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2019-08-26$107,314
- Department of Homeland SecuritySHAFT, PROPULSIONcontract · Last action 2015-03-13$92,673
- Department of Homeland SecurityIGF::OT::IGF. OPEN, INSPECT, AND REPAIR OF FINS AND RUDDERS. QUANTITY 10 (NSN: 2040 99-726-4768).contract · Last action 2019-07-23$89,528
- Department of Homeland SecurityIGF::OT::IGF. OPEN, INSPECT, AND REPAIR OF 10 RUDDERS.contract · Last action 2017-09-06$86,413
- Department of Homeland SecurityIGF::OT::IGF. OPEN, INSPECT, AND REPAIR OF FINS AND RUDDERS. QUANTITY 10 (NSN: 2040 01-223-2674).contract · Last action 2018-08-07$82,693
- Department of Homeland SecurityNSN: 2040-01-336-6545 210 RUDDER BLADE MARINEcontract · Last action 2015-12-08$78,500
- Department of Homeland Security2040-013448471 210' B RUDDER STOCK W/LINERcontract · Last action 2016-09-14$76,860
- Department of DefenseREPAIR HOPPER DOOR OUTBOARD AND INBOARD CRANKSHAFTScontract · Last action 2012-08-07$76,718
- Department of Homeland SecurityWPB87 RUDDER ASSEMBLY PORT AND STARBOARDcontract · Last action 2012-05-17$76,200
- Department of Homeland Security2040-01-444-6315 MARINE RUDDER 47 MLBcontract · Last action 2017-02-13$74,700
- Department of DefenseDREDGE MCFARLAND OVERFLOW DISCHARGE ELBOcontract · Last action 2010-09-13$73,829
- Department of Homeland SecurityREPAIR OF (10) STBD RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2023-04-12$71,830
- Department of Homeland SecurityREPAIR OF (10) PORT RUDDER ASSY, NSN: 2040-01-461-1944contract · Last action 2023-04-12$71,543
- Department of Homeland SecurityREPAIR OF (9) STBD RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2019-09-18$70,452
- Department of Homeland SecurityIGF::OT::IGF; REPAIR OF PORT RUDDER ASSY. NSN: 2040-01-461-1944contract · Last action 2022-09-13$68,893
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (10) STBD RUDDER ASSY, NSN: 2040-01-461-1943contract · Last action 2022-09-13$67,310
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (10) PORT RUDDER ASSY, NSN: 2040-01-461-1943contract · Last action 2022-09-13$67,310
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (9) PORT RUDDY ASSY, NSN: 2040-01-461-1944contract · Last action 2019-08-08$66,931
- Department of Homeland Security2040-014611943 WPB-87 RUDDER ASSEMBLY STBD 2040-014611944 WPB 87 RUDDER ASSEMBLY, PORTcontract · Last action 2015-08-03$66,500
- Department of Homeland SecurityREPAIR OF (9) PORT RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2023-04-12$66,064
- Department of Homeland SecurityIGF::OT::IGF; REPAIR OF (10) RUDDERS NSN: 2040-01-461-1944 PORTcontract · Last action 2016-08-24$62,945
- Department of Homeland SecurityIGF::OT::IGF; REPAIR OF STBD RUDDER ASSY. NSN: 2040-01-461-1943contract · Last action 2022-05-19$62,630
- Department of Homeland SecurityPURCHASE OF (5) STBD RUDDER ASSEMBLY NSN: 2040-01-461-1943, P/N: 87 WPB 561-001 STBD @ $6,250.00 EA. (5) PORT RUDDER ASSEMBLY NSN: 2040-01-461-1944, P/N: 87 WPB 561-001 PORT @ $6,250.00 EAcontract · Last action 2011-07-13$62,500
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (9) STBD RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2019-08-08$62,186
- Department of Homeland Security2040-014611943 WPB-87 RUDDER ASSEMBLY STBD 2040-014611944 WPB 87 RUDDER ASSEMBLY, PORTcontract · Last action 2014-12-09$62,000
- Department of Homeland Security2040-014611943 WPB-87 RUDDER ASSEMBLY STBD 2040-014611944 WPB 87 RUDDER ASSEMBLY, PORTcontract · Last action 2014-07-22$62,000
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (9) STBD RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2022-09-13$60,579
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (9) STBD RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2022-09-13$60,579
- Department of Homeland SecurityIGF::OT::IGF; REPAIR OF (10) RUDDERS NSN: 2040-01-461-1943contract · Last action 2022-09-13$57,150
- Department of Homeland SecurityIGF::OT::IGF OPEN, INSPECT, REPORT AND POSSIBLE REPAIR OF PORT AND STBD RUDDERS USED ON 87' PATROL BOATScontract · Last action 2013-05-23$57,105
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (9) STBD RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2019-02-26$56,407
- Department of Homeland SecurityIGF::OT::IGF REPAIR RUDDER BOAT. OPEN, INSPECT AND REPORT ONLY!!contract · Last action 2017-09-20$53,034
- Department of Homeland Security2040-014757977 STOPPER ASSEMBLY,CHAINcontract · Last action 2014-12-15$49,000
- Department of Homeland SecurityRADAR REFLECTORScontract · Last action 2008-07-09$48,958
- Department of Homeland Security2010-014589175 SHAFT, PROPULSIONcontract · Last action 2015-04-03$48,800
- Department of Homeland SecurityOPEN, INSPECT AND REPORT ON SHAFT, PROPULSION PART NO. 87WPB, 243-001contract · Last action 2013-07-16$44,590
- Department of Homeland Security2040-014611943 WPB-87 RUDDER ASSEMBLY STBD 2040-014611944 WPB 87 RUDDER ASSEMBLY, PORTcontract · Last action 2015-03-20$42,625
- Department of Homeland SecurityOPEN, INSPECT AND REPAIR SHAFT, SHOULDERED 270' WMEC FINScontract · Last action 2013-04-12$39,690
- Department of Homeland SecurityNSN 2040 01-502-5238, STOPPER ASSY, CHAIN, UPPER, 2 EACH, P/N 573-009 PC 17, MFG: MARINETTE MARINE CORPORATION. FUNDS FOR THE REPAIR HAVE BEEN PREVIOUSLY FUNDED IN THE AMOUNT OF $17,457.60. OPEN, INSPECT AND REPORT ONLY. IGF::OT::IGFcontract · Last action 2015-01-20$38,460
- Department of Homeland SecurityMARINE RUDDERcontract · Last action 2008-01-30$36,250
- Department of Homeland SecuritySHAFT SHOULDER 3040-01-501-2646contract · Last action 2016-02-24$35,354
- Department of Homeland SecurityIGF::OT::IGF REPAIR OF (6) STBD RUDDY ASSY, NSN: 2040-01-461-1943contract · Last action 2023-04-12$34,454
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2024-07-11. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2020-07-01 | Complaint | 6 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within NC, ordered by federal enforcement volume:
- TURNAMICS, INC.ASHEVILLE — 2 federal enforcement records
- BAITY'S PRECISION MACHINING, INC.ARDEN — 2 federal enforcement records
- UPCHURCH MACHINE CO., INC.CHARLOTTE — 2 federal enforcement records
- P & E MACHINE CO., INC.KANNAPOLIS — 1 federal enforcement record
- NASHVILLE WELDING - MACHINE WORKS, INC.WILSON — 1 federal enforcement record
- QUALITY CONTRACT MANUFACTURING, INCLOUISBURG — 1 federal enforcement record
- LANGLEY INDUSTRIAL MACHINING, INC.SHARPSBURG — 1 federal enforcement record
- REYNOLDA MANUFACTURING SOLUTIONS, INC.BURLINGTON — 1 federal enforcement record
- SUPERIOR MACHINE CO. OF SOUTH CAROLINA, INC.MARION — 1 federal enforcement record
- PETTY MACHINE COMPANY, INCORPORATEDGASTONIA — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in NCState-wide enforcement data
- Machine Shops in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DAMCO, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DAMCO, INC.'s OSHA violation history?
- DAMCO, INC. has 1 OSHA inspection on record with 6 violations and $0 in total penalties.
- How does DAMCO, INC.'s safety record compare to its industry?
- DAMCO, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.