Establishment profile
BAITY'S PRECISION MACHINING, INC.
131 GLENN BRIDGE ROAD, ARDEN, NC, 28704
332710 — Machine Shops
Summary
BAITY'S PRECISION MACHINING, INC. has accumulated 24 OSHA violations across 3 inspections over 30 years of recorded history, with $1,250 in total assessed penalties.
The establishment sits in the 87th percentile for violations within its industry-state peer group of 172 employers. Inspection frequency runs at the 73rd percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 2 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
BAITY'S PRECISION MACHINING, INC. appears in OSHA workplace safety and WHD wage enforcement records only. No matching records were found in MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within NC. Peer group: 172 employers. This establishment has 24 OSHA violations; peer median is 8.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for BAITY'S PRECISION MACHINING, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for BAITY'S PRECISION MACHINING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
Department of Labor Wage & Hour Division — minimum-wage, overtime, child-labor, FMLA, and prevailing-wage enforcement.
Wage and hour breakdown by law
Per-statute totals across all closed DOL Wage & Hour cases against this employer. Backwages reflect amounts the agency assessed; civil penalty is the separate fine where applicable. Some acts (Davis-Bacon, SCA, CWHSSA, H-2B, CCPA) don't carry a civil penalty field in DOL's data. 1 statute · 4 violations · $181 in backwages
| Statute | Period | Cases | Violations | Workers | Backwages | Civil penalty |
|---|---|---|---|---|---|---|
| FLSA — minimum wage & overtime | Apr 2014 | 1 | 4 | 4 | $181 | — |
Source: DOL WHD enforcement database, aggregated per statute. Lifetime totals. A case can cite multiple statutes — so the total here may exceed the case count in the table above.
Wage and hour cases
Closed DOL Wage & Hour Division cases (FLSA, FMLA, H-2B, MSPA, and related statutes). Backwages reflect amounts the agency assessed; final payment may differ. 1 case · $181 in backwages · 4 workers affected
| Case period | Industry | Backwages | Workers |
|---|---|---|---|
| Apr 2012 – Apr 2014 | Other Metalworking Machinery Manufacturing | $181 | 4 |
Source: DOL WHD enforcement database. Cases shown reflect those the agency has closed and made public.
Mine safety (MSHA)
No MSHA mine safety violations on file for BAITY'S PRECISION MACHINING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for BAITY'S PRECISION MACHINING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for BAITY'S PRECISION MACHINING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for BAITY'S PRECISION MACHINING, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for BAITY'S PRECISION MACHINING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2008-08-13 | Planned | 4 | — | $0 | |
| 2003-11-26 | Planned | 6 | 1 | $250 | |
| 1996-05-29 | Planned | 14 | 4 | $1,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within NC, ordered by federal enforcement volume:
- TURNAMICS, INC.ASHEVILLE — 2 federal enforcement records
- UPCHURCH MACHINE CO., INC.CHARLOTTE — 2 federal enforcement records
- P & E MACHINE CO., INC.KANNAPOLIS — 1 federal enforcement record
- LANGLEY INDUSTRIAL MACHINING, INC.SHARPSBURG — 1 federal enforcement record
- NASHVILLE WELDING - MACHINE WORKS, INC.WILSON — 1 federal enforcement record
- TIGERTEK, INC. DBA TIGERTEK INDUSTRIAL SERVICESEDEN — 1 federal enforcement record
- PETTY MACHINE COMPANY, INCORPORATEDGASTONIA — 1 federal enforcement record
- QUALITY CONTRACT MANUFACTURING, INCLOUISBURG — 1 federal enforcement record
- REYNOLDA MANUFACTURING SOLUTIONS, INC.BURLINGTON — 1 federal enforcement record
- MODERN MACHINE AND METAL FABRICATORS, INC.WINSTON SALEM — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in NCState-wide enforcement data
- Machine Shops in NCIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on BAITY'S PRECISION MACHINING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is BAITY'S PRECISION MACHINING, INC.'s OSHA violation history?
- BAITY'S PRECISION MACHINING, INC. has 3 OSHA inspections on record with 24 violations and $1,250 in total penalties.
- How does BAITY'S PRECISION MACHINING, INC.'s safety record compare to its industry?
- BAITY'S PRECISION MACHINING, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.