Establishment profile
CENT-ROLL PRODUCTS, LLC
4866 FACTORY DR, FAIRFIELD, OH, 45014
333517 — Machine Tool Manufacturing
EIN 311176972
Summary
CENT-ROLL PRODUCTS, LLC has accumulated 4 OSHA violations across 2 inspections over 7 years of recorded history, with $8,146 in total assessed penalties.
The establishment sits in the 42nd percentile for violations within its industry-state peer group of 226 employers. Inspection frequency runs at the 52nd percentile. The most recent enforcement activity was recorded 2 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CENT-ROLL PRODUCTS, LLC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $8,146 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0184 C01 | 1 | 1 | $5,646 | Nov 2024 | Nov 2024 |
| 29 CFR 1910.0132 D01 | 1 | 1 | $2,500 | Nov 2024 | Nov 2024 |
| 29 CFR 1910.0184 D | 1 | 1 | — | Nov 2024 | Nov 2024 |
| 29 CFR 1910.0184 H05 | 1 | 1 | — | Nov 2024 | Nov 2024 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3335 within OH. Peer group: 226 employers. This establishment has 4 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 33 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jun 2019 – Aug 2024 · 1 in last 5 years
Most frequent event: Compressed or pinched by shifting objects or equipment
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Aug 19, 2024 | Struck by other falling object n.e.c. | Foot (feet), toe(s) unspecified | Hospitalized | |
| Jun 4, 2019 | Compressed or pinched by shifting objects or equipment | Finger(s), fingernail(s), n.e.c. | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Jun 4, 2019 | Amputated,Amputation,Contact,Finger,Grinder,Grinding Machine,Hand,Lathe,Pulled In,Rubber | 1 | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 2+ years. Most recent activity: 2 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CENT-ROLL PRODUCTS, LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CENT-ROLL PRODUCTS, LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CENT-ROLL PRODUCTS, LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CENT-ROLL PRODUCTS, LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CENT-ROLL PRODUCTS, LLC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-08-23 | Referral | 4 | 3 | $8,146 | |
| 2019-06-11 | Referral | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine tool manufacturing within OH, ordered by federal enforcement volume:
- APEX TOOL GROUP, LLCDAYTON — 3 federal enforcement records
- GLENRIDGE MACHINE COMPANYWILLOUGHBY — 2 federal enforcement records
- CINCINNATI INCORPORATEDHARRISON — 2 federal enforcement records
- B & B GEAR AND MACHINE COMPANY, INC.NEW LEBANON — 1 federal enforcement record
- HYPER TOOL COMPANYCHAGRIN FALLS — 1 federal enforcement record
- BULLY TOOLS INC.STEUBENVILLE — 1 federal enforcement record
- OSG-STERLING DIE, INC.PARMA — 1 federal enforcement record
- ROGERS INDUSTRIAL PRODUCTS, INC.AKRON — 1 federal enforcement record
- NOBLE TOOL CORPORATIONDAYTON — 1 federal enforcement record
- A.STUCKI COMPANY, INC.NORTH CANTON — 1 federal enforcement record
Related searches
- Machine Tool ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- Machine Tool Manufacturing in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CENT-ROLL PRODUCTS, LLC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CENT-ROLL PRODUCTS, LLC's OSHA violation history?
- CENT-ROLL PRODUCTS, LLC has 2 OSHA inspections on record with 4 violations and $8,146 in total penalties.
- How does CENT-ROLL PRODUCTS, LLC's safety record compare to its industry?
- CENT-ROLL PRODUCTS, LLC operates in the machine tool manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.3. CENT-ROLL PRODUCTS, LLC's self-reported DART rate is 0 compared to an industry average of 1.2.