Skip to main content

Establishment profile

CAST METALS TECHNOLOGY, INC.

9011 W. MILL ROAD, YORKTOWN, IN, 47396
Operated by Cast Metals Technology · 1 of 2 establishments
331524Aluminum Foundries (except Die-Casting)
EIN 311362226

Download as PDF →

OSHA inspections
6
over 29 years
Violations
45
$11,570 in penalties
Penalties
$11,570
$257 avg
Accident investigations on record
1 National Emphasis Program inspections

Summary

CAST METALS TECHNOLOGY, INC. has accumulated 45 OSHA violations across 6 inspections over 29 years of recorded history, with $11,570 in total assessed penalties.

The establishment sits in the 83rd percentile for violations within its industry-state peer group of 139 employers. Inspection frequency runs at the 69th percentile. The most recent enforcement activity was recorded 15 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CAST METALS TECHNOLOGY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
6
0.2 / yr · last 29 yrs
Violations
45
1.6 / yr
Penalties
$11,570
$257 avg / violation
71% serious29% other
Inspection trigger · planned
4 of 6
Inspection trigger · referral
2 of 6

67% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $11,570 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0023 C0122$2,000Jul 1997Sep 2011
29 CFR 1910.0253 B04 III22Jul 1997Sep 2011
29 CFR 1910.0095 B0111$980Sep 2011Sep 2011
29 CFR 1910.0212 A0111$980Sep 2011Sep 2011
29 CFR 1910.0106 E02 IIB211$980Sep 2011Sep 2011
29 CFR 1904.0010 A11$700Sep 2011Sep 2011
29 CFR 1910.0022 A0111$700Sep 2011Sep 2011
29 CFR 1910.1030 C01 I11$700Sep 2011Sep 2011
29 CFR 1910.0303 B0211$700Sep 2011Sep 2011
29 CFR 1910.0146 C0111$700Sep 2011Sep 2011
29 CFR 1910.0134 C02 II11$700Sep 2011Sep 2011
29 CFR 1910.0037 A0211$560Sep 2011Sep 2011
29 CFR 1910.0178 Q0111$560Sep 2011Sep 2011
29 CFR 1910.1200 H0111$560Sep 2011Sep 2011
29 CFR 1910.1200 E0111$375Jul 1997Jul 1997
29 CFR 1910.0303 G02 I11$375Jul 1997Jul 1997
29 CFR 1910.0134 C02 I11Sep 2011Sep 2011
29 CFR 1910.0132 A11Sep 2011Sep 2011
29 CFR 1910.0106 E06 I11Sep 2011Sep 2011
29 CFR 1910.0157 D0111Sep 2011Sep 2011

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

83rd

Worse on violations than most other employers in NAICS 3315 within IN. Peer group: 139 employers. This establishment has 45 OSHA violations; peer median is 8.

Fewer violationsMore violations
Penalty percentile
74th
peer median: $3,510
Inspection frequency
69th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
13.9
vs industry
+10.0
TRIR
13.9
vs industry
+8.7

Reported for 36 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
5.2
BLS SOII 2024
Industry avg DART
3.9
BLS SOII 2024
Self-reported TRIR
13.9
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
4
Referral
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CAST METALS TECHNOLOGY, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
15 years ago

No federal enforcement activity has been recorded against this establishment in 15+ years. Most recent activity: 15 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CAST METALS TECHNOLOGY, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CAST METALS TECHNOLOGY, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CAST METALS TECHNOLOGY, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CAST METALS TECHNOLOGY, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CAST METALS TECHNOLOGY, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CAST METALS TECHNOLOGY, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2011-04-06Referral1515$4,240
2011-04-06Referral33$700
2011-03-22Planned1411$5,880
2001-09-05Planned0$0
1999-08-11Planned0$0
1997-06-05Planned133$750

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

CAST METALS TECHNOLOGY, INC. is one of 2 establishments rolled up under the parent organization Cast Metals Technology.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Cast Metals Technology across all 2 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in aluminum foundries (except die-casting) within IN, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by Cast Metals Technology, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on CAST METALS TECHNOLOGY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Cast Metals Technology, which operates 2 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CAST METALS TECHNOLOGY, INC.'s OSHA violation history?
CAST METALS TECHNOLOGY, INC. has 6 OSHA inspections on record with 45 violations and $11,570 in total penalties.
How does CAST METALS TECHNOLOGY, INC.'s safety record compare to its industry?
CAST METALS TECHNOLOGY, INC. operates in the aluminum foundries (except die-casting) industry. The industry average Total Recordable Incident Rate (TRIR) is 5.2. CAST METALS TECHNOLOGY, INC.'s self-reported DART rate is 13.88 compared to an industry average of 3.9.