Establishment profile
ATLANTIS PLASTIC INJECTION MOLDING
1512 PHOENIX RD NE, WARREN, OH, 44483
325211 — Plastics Material and Resin Manufacturing
Summary
ATLANTIS PLASTIC INJECTION MOLDING has accumulated 22 OSHA violations across 3 inspections over 24 years of recorded history, with $16,958 in total assessed penalties.
The establishment sits in the 90th percentile for violations within its industry-state peer group of 127 employers. Inspection frequency runs at the 75th percentile. The most recent enforcement activity was recorded 22 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ATLANTIS PLASTIC INJECTION MOLDING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $16,958 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0305 B01 | 3 | 2 | — | Aug 2003 | Aug 2004 |
| 29 CFR 1910.0178 M05 III | 1 | 1 | $5,000 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0023 D01 II | 1 | 1 | $2,000 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $1,500 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0178 M05 I | 1 | 1 | $1,500 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0305 A02 IIIG | 1 | 1 | $1,500 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0178 Q07 | 1 | 1 | $1,000 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $1,000 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $910 | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0110 E04 III | 1 | 1 | $683 | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $683 | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0242 B | 1 | 1 | $683 | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0026 C02 VII | 1 | 1 | $500 | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0037 B05 | 1 | 1 | — | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0023 E01 | 1 | 1 | — | Aug 2004 | Aug 2004 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Aug 2004 | Aug 2004 |
| 29 CFR 1910.1200 E01 I | 1 | 1 | — | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Aug 2003 | Aug 2003 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3252 within OH. Peer group: 127 employers. This establishment has 22 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ATLANTIS PLASTIC INJECTION MOLDING. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ATLANTIS PLASTIC INJECTION MOLDING. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Apr 25, 2004 | CAUGHT BETWEEN,INDUSTRIAL TRUCK,STRUCK BY,CONCUSSIONFatality | 1 | — | 1 |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 22+ years. Most recent activity: 22 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ATLANTIS PLASTIC INJECTION MOLDING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ATLANTIS PLASTIC INJECTION MOLDING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ATLANTIS PLASTIC INJECTION MOLDING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ATLANTIS PLASTIC INJECTION MOLDING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ATLANTIS PLASTIC INJECTION MOLDING. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ATLANTIS PLASTIC INJECTION MOLDING. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2004-04-26 | Accident | 14 | 8 | $14,000 | |
| 2003-07-29 | Planned | 8 | 4 | $2,958 | |
| 2002-04-19 | Programmed Other | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in plastics material and resin manufacturing within OH, ordered by federal enforcement volume:
- INEOS ABS (USA) LLCADDYSTON — 2 federal enforcement records
- UNIVERSAL POLYMER & RUBBER, LTDMIDDLEFIELD — 2 federal enforcement records
- POLYONE CORPORATIONGREENVILLE — 2 federal enforcement records
- DUREZ CORPORATIONKENTON — 2 federal enforcement records
- ALSIDE INC.CUYAHOGA FALLS — 2 federal enforcement records
- 20/20 CUSTOM MOLDED PLASTICS, LLCHOLIDAY CITY — 2 federal enforcement records
- ALLIANCE EQUIPMENT CO INCALLIANCE — 2 federal enforcement records
- ADVANCED COMPOSITES, INC.SIDNEY — 2 federal enforcement records
- SOLVAY ADVANCED POLYMERSMARIETTA — 2 federal enforcement records
- RADICI PLASTICS USA INC.WADSWORTH — 2 federal enforcement records
Related searches
- Plastics Material and Resin ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- Plastics Material and in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ATLANTIS PLASTIC INJECTION MOLDING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ATLANTIS PLASTIC INJECTION MOLDING's OSHA violation history?
- ATLANTIS PLASTIC INJECTION MOLDING has 3 OSHA inspections on record with 22 violations and $16,957.5 in total penalties.
- How does ATLANTIS PLASTIC INJECTION MOLDING's safety record compare to its industry?
- ATLANTIS PLASTIC INJECTION MOLDING operates in the plastics material and resin manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.9.
- Has ATLANTIS PLASTIC INJECTION MOLDING had any workplace fatalities?
- Yes. Federal records show 1 fatality investigation involving ATLANTIS PLASTIC INJECTION MOLDING.