Establishment profile
ADVANCED METAL PROCESSING LLC
424 T KEMP RD, LOUISBURG, NC, 27549
562920 — Materials Recovery Facilities
Summary
ADVANCED METAL PROCESSING LLC has accumulated 50 OSHA violations across 7 inspections over 18 years of recorded history, with $16,150 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 343 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 10 years ago.
Federal records were found in 1 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ADVANCED METAL PROCESSING LLC appears in OSHA workplace safety and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, or NHTSA vehicle recalls.
OSHA workplace safety
71% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than nearly every other employer in NAICS 5629 within NC. Peer group: 343 employers. This establishment has 50 OSHA violations; peer median is 0.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ADVANCED METAL PROCESSING LLC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADVANCED METAL PROCESSING LLC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ADVANCED METAL PROCESSING LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ADVANCED METAL PROCESSING LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ADVANCED METAL PROCESSING LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for ADVANCED METAL PROCESSING LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ADVANCED METAL PROCESSING LLC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ADVANCED METAL PROCESSING LLC. Verify directly with UVA Corporate Prosecution Registry →
CPSC product recalls
Top hazard: The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard.. Most recent recall: 2011-09-22. Source: Consumer Product Safety Commission, matched on company name.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2016-02-16 | Complaint | 7 | 2 | $900 | |
| 2015-11-18 | Complaint | 6 | 5 | $5,850 | |
| 2014-06-09 | Complaint | 9 | 6 | $3,200 | |
| 2009-03-12 | Complaint | 27 | 12 | $6,200 | |
| 2009-02-05 | Complaint | 0 | — | $0 | |
| 2009-01-23 | Complaint | 1 | — | $0 | |
| 2007-08-21 | Complaint | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in materials recovery facilities within NC, ordered by federal enforcement volume:
- RECYCLING ASSOCIATES, LLCLENOIR — 2 federal enforcement records
- REPUBLIC SERVICES OF NORTH CAROLINA, LLCBURLINGTON — 2 federal enforcement records
- WASTE MANAGEMENT OF CAROLINAS, INC.FAYETTEVILLE — 2 federal enforcement records
- FCR CHARLOTTE, LLCCHARLOTTE — 1 federal enforcement record
- GREENE BROS. WELL & PUMP, W. T., INC.DBA HAYWOOD RCANTON — 1 federal enforcement record
- SWAIN COUNTY SOLID WASTEBRYSON CITY — 1 federal enforcement record
- BLUESKY TRADING, LLCRALEIGH — 1 federal enforcement record
- LIVERMAN METAL RECYCLING, INC.KELFORD — 1 federal enforcement record
- LAKEVILLE RECYCLING L.P. DBA CONTAINER RECYCLING ARALEIGH — 1 federal enforcement record
- TRIAD METAL RECYCLERS, LLCYADKINVILLE — 1 federal enforcement record
Related searches
- Materials Recovery FacilitiesAll employers in this industry
- Employers in NCState-wide enforcement data
- Materials Recovery Facilities in NCIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on ADVANCED METAL PROCESSING LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is ADVANCED METAL PROCESSING LLC's OSHA violation history?
- ADVANCED METAL PROCESSING LLC has 7 OSHA inspections on record with 50 violations and $16,150 in total penalties.
- How does ADVANCED METAL PROCESSING LLC's safety record compare to its industry?
- ADVANCED METAL PROCESSING LLC operates in the materials recovery facilities industry. The industry average Total Recordable Incident Rate (TRIR) is 5.9.