Establishment profile
WILSON TOOL INTERNATIONAL INC
12912 FARNHAM AVE, WHITE BEAR LAKE, MN, 55110
333517 — Machine Tool Manufacturing
EIN 410952774
Summary
WILSON TOOL INTERNATIONAL INC has accumulated 46 OSHA violations across 10 inspections over 36 years of recorded history, with $56,930 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 236 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
WILSON TOOL INTERNATIONAL INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
90% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 31 citations in this view · $54,310 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 3 | 3 | $7,600 | Aug 1990 | Nov 2005 |
| 29 CFR 1910.0147 C04 I | 2 | 2 | $8,600 | Feb 2004 | Mar 2005 |
| 29 CFR 1910.0333 A | 2 | 2 | $8,040 | Feb 2004 | Mar 2005 |
| 29 CFR 1910.0147 C07 I | 2 | 2 | $7,760 | Feb 2004 | Mar 2005 |
| 29 CFR 1910.0147 C06 I | 2 | 2 | $3,600 | Feb 2004 | Mar 2005 |
| 29 CFR 1910.0242 B | 2 | 2 | $3,260 | Feb 2004 | Mar 2005 |
| 29 CFR 5205.0116 | 2 | 2 | $2,170 | Mar 2017 | Jun 2025 |
| 29 CFR 5206.070001 G | 2 | 2 | $2,160 | Feb 2004 | Nov 2005 |
| 29 CFR 5205.1200 | 2 | 2 | $910 | Mar 2017 | Jun 2025 |
| 29 CFR 1910.0335 A02 II | 2 | 1 | — | Mar 2005 | Mar 2005 |
| 29 CFR 1910.0335 A01 I | 1 | 1 | $2,250 | Mar 2005 | Mar 2005 |
| 29 CFR 1910.0333 B02 I | 1 | 1 | $1,800 | Mar 2005 | Mar 2005 |
| 29 CFR 5205.0675 | 1 | 1 | $1,260 | Jun 2025 | Jun 2025 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $840 | Jun 2025 | Jun 2025 |
| 29 CFR 1910.0106 E06II | 1 | 1 | $840 | Apr 2008 | Apr 2008 |
| 29 CFR 1910.0146 C01 | 1 | 1 | $840 | Feb 2004 | Feb 2004 |
| 29 CFR 5205.0890 | 1 | 1 | $630 | Apr 2008 | Apr 2008 |
| 29 CFR 5205.1210 | 1 | 1 | $630 | Apr 2008 | Apr 2008 |
| 29 CFR 1910.0134 C02 | 1 | 1 | $560 | Feb 2004 | Feb 2004 |
| 29 CFR 1910.0219 C04 I | 1 | 1 | $560 | Feb 2004 | Feb 2004 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within MN. Peer group: 236 employers. This establishment has 46 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 470 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for WILSON TOOL INTERNATIONAL INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for WILSON TOOL INTERNATIONAL INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for WILSON TOOL INTERNATIONAL INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for WILSON TOOL INTERNATIONAL INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for WILSON TOOL INTERNATIONAL INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for WILSON TOOL INTERNATIONAL INC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
WILSON TOOL INTERNATIONAL INCORPORATED 12912 FARNHAM AVENUE · WHITE BEAR LAKE, MN, 55110 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for WILSON TOOL INTERNATIONAL INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseW9800 PENTRATOR CASE AND ESTIMATEDcontract · Last action 2015-09-15$56,538
- Department of DefenseHANGER DIEcontract · Last action 2018-07-26$46,995
- Department of DefensePUNCHES AND DIEScontract · Last action 2010-01-28$39,846
- Department of DefenseFSC: 3415 NAME: PDG PUNCH AND PART NUMBER: PDGcontract · Last action 2010-08-23$31,822
- Department of DefensePUNCH PRESS KITcontract · Last action 2017-05-09$29,163
- National Aeronautics and Space AdministrationCROWNING DIE FOR ACCURPRESS BRAKEcontract · Last action 2015-11-05$23,316
- National Aeronautics and Space AdministrationPRESS BRAKE TOOLINGcontract · Last action 2008-05-21$15,783
- Department of Homeland SecurityPURCHASE CUSTOM PUNCHES AND DIES FOR USE ON PRESS BRAKE MACHINE.contract · Last action 2018-06-21$9,278
- Department of DefenseDIE SET, 70 MM PART NUMBER: 63070-455contract · Last action 2015-02-20$7,480
- Department of DefenseFSC: 5136 NAME: HUGGER, SLUG, PART NUMBER: 12965/RT2.0000contract · Last action 2010-01-12$6,952
- Department of DefenseHANGER DIEScontract · Last action 2016-11-15$6,115
- National Aeronautics and Space AdministrationTOOL CABINETcontract · Last action 2008-04-04$6,034
- Department of DefenseFSC: NAME: GOOSENECK PUNC PART NUMBER:contract · Last action 2011-11-16$5,831
- Department of JusticeHARDWAREcontract · Last action 2012-09-28$5,598
- Department of DefenseDIE SET, 100MM PART NUMBER: 61100-550contract · Last action 2015-03-26$3,528
- Department of DefenseFSC: 7777 NAME: PUNCH HOLDER PART NUMBER:contract · Last action 2011-10-25$3,220
- Department of DefenseFSC: 5136 NAME: CABINET, THICK PART NUMBER: 90001contract · Last action 2009-11-05$3,209
- General Services Administration10436 3.5" GUIDE ASSEMBLYcontract · Last action 2008-12-24$1,425
- Department of DefenseFSC: 5136 PART NUMBER: 1947contract · Last action 2009-12-03$1,408
- Department of DefenseDIE, THICK SLUG HUGGERcontract · Last action 2010-02-11$978
- Department of DefenseDIE, SLUG HUGGERcontract · Last action 2010-03-18$707
- General Services Administration447 .500 DROP IN GUIDE ASSEMBLYcontract · Last action 2008-12-24$689
- General Services Administration476 .625 GUIDE ASSEMBLY W/CLOSED ROUND STRIPPER PLATEcontract · Last action 2008-12-24$689
- Department of DefensePUNCH, STEEL,contract · Last action 2010-04-13$404
- Department of DefenseDIE, SLUG HUGGERcontract · Last action 2010-06-14$169
- General Services Administration475 .625 DROP IN PUNCH HEADcontract · Last action 2008-12-24$81
- General Services Administration448 .500 DROP IN STYLE PUNCH HEADcontract · Last action 2008-12-24$81
Federal contract dollars to this establishment. Primary NAICS: 333517 - MACHINE TOOL MANUFACTURING. Last action: 2018-07-26. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-06-03 | Planned | 5 | 2 | $4,620 | |
| 2017-03-08 | Planned | 2 | — | $980 | |
| 2008-04-10 | Planned | 3 | 3 | $2,100 | |
| 2005-11-07 | Complaint | 2 | 1 | $5,600 | |
| 2005-01-25 | Complaint | 13 | 5 | $35,550 | |
| 2003-12-01 | Planned | 14 | 13 | $7,140 | |
| 1999-05-06 | Complaint | 1 | — | $400 | |
| 1997-04-14 | Complaint | 0 | — | $0 | |
| 1993-04-27 | Planned | 2 | 1 | $540 | |
| 1990-07-20 | Planned | 4 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine tool manufacturing within MN, ordered by federal enforcement volume:
- HYPERTHERM INCSAINT PAUL — 1 federal enforcement record
- NORTHWOODS MACHINE INCELK RIVER — 1 federal enforcement record
- ACCURPRESS INCWILLMAR — 1 federal enforcement record
- UNI HYDRO INCCOSMOS — 1 federal enforcement record
- CONTINENTAL MACHINES INC DBA DOALL SAWING PRODUCTSSAVAGE — 1 federal enforcement record
- CONTINENTAL MACHINES INCSAVAGE — 1 federal enforcement record
- INTERLAKEN TECHNOLOGY COMPANY LLCCHASKA — 1 federal enforcement record
- ELEMET MANUFACTURING INCAITKIN — 1 federal enforcement record
- EDWARDS MANUFACTURING COMPANY OF ALBERT LEAALBERT LEA — 1 federal enforcement record
- RAZOR EDGE SYSTEMS INCELY — 1 federal enforcement record
Related searches
- Machine Tool ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Machine Tool Manufacturing in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on WILSON TOOL INTERNATIONAL INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is WILSON TOOL INTERNATIONAL INC's OSHA violation history?
- WILSON TOOL INTERNATIONAL INC has 10 OSHA inspections on record with 46 violations and $56,930 in total penalties.
- How does WILSON TOOL INTERNATIONAL INC's safety record compare to its industry?
- WILSON TOOL INTERNATIONAL INC operates in the machine tool manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.3. WILSON TOOL INTERNATIONAL INC's self-reported DART rate is 1.13 compared to an industry average of 1.2.