Establishment profile
WHITNEY TOOL COMPANY, INC.
906 R ST., BEDFORD, IN, 47421
333515 — Cutting Tool and Machine Tool Accessory Manufacturing
Summary
WHITNEY TOOL COMPANY, INC. has accumulated 8 OSHA violations across 3 inspections over 26 years of recorded history, with $1,156 in total assessed penalties.
The establishment sits in the 61st percentile for violations within its industry-state peer group of 89 employers. Inspection frequency runs at the 75th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
WHITNEY TOOL COMPANY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 8 distinct standards shown · 8 citations in this view · $1,156 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $750 | Nov 1999 | Nov 1999 |
| 29 CFR 1910.0133 A01 | 1 | 1 | $244 | Feb 2010 | Feb 2010 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | $163 | Feb 2010 | Feb 2010 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Feb 2010 | Feb 2010 |
| 29 CFR 1910.0138 A | 1 | 1 | — | Feb 2010 | Feb 2010 |
| 29 CFR 1910.1200 F05 II | 1 | 1 | — | Feb 2010 | Feb 2010 |
| 29 CFR 1910.0147 C05 IID | 1 | 1 | — | Nov 1999 | Nov 1999 |
| 29 CFR 1910.1200 E01 I | 1 | 1 | — | Nov 1999 | Nov 1999 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3335 within IN. Peer group: 89 employers. This establishment has 8 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for WHITNEY TOOL COMPANY, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for WHITNEY TOOL COMPANY, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for WHITNEY TOOL COMPANY, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for WHITNEY TOOL COMPANY, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for WHITNEY TOOL COMPANY, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for WHITNEY TOOL COMPANY, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for WHITNEY TOOL COMPANY, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
WHITNEY TOOL CO INC 906 R ST · BEDFORD, IN, 47421 | RCRA | No Violation Identified | 0 | 0 | — | Aug 2002 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for WHITNEY TOOL COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseREAMER,HAND, NSN 5110-01-026-5253contract · Last action 2011-03-17$6,788
- Department of the TreasuryBPA FOR TOOLINGcontract · Last action 2009-11-18$0
Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2011-03-17. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-11-15 | Planned | 0 | — | $0 | |
| 2010-01-12 | Planned | 5 | 2 | $406 | |
| 1999-09-29 | Planned | 3 | — | $750 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in cutting tool and machine tool accessory manufacturing within IN, ordered by federal enforcement volume:
- HOWER TOOL, INC.OSSIAN — 1 federal enforcement record
- TASCON CORP.INDIANAPOLIS — 1 federal enforcement record
- W.F. MYERS COMPANY, INC.BEDFORD — 1 federal enforcement record
- SPEEDGRIP CHUCK CO.ELKHART — 1 federal enforcement record
- GREENWOOD TOOL AND DIE INCGRIFFITH — 1 federal enforcement record
- HOOSIER SPLINE BROACH CORP.KOKOMO — 1 federal enforcement record
- PRECISION CAMS, INC.INDIANAPOLIS — 1 federal enforcement record
- SP3 CUTTING TOOLS, INCDECATUR — 1 federal enforcement record
- ALLIANCE TOOL & EQUIPMENT INC.FORT WAYNE — 1 federal enforcement record
- REGAL-BELOIT CORPMITCHELL — 1 federal enforcement record
Related searches
- Cutting Tool and Machine Tool Accessory ManufacturingAll employers in this industry
- Employers in INState-wide enforcement data
- Cutting Tool and in INIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on WHITNEY TOOL COMPANY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is WHITNEY TOOL COMPANY, INC.'s OSHA violation history?
- WHITNEY TOOL COMPANY, INC. has 3 OSHA inspections on record with 8 violations and $1,156.25 in total penalties.
- How does WHITNEY TOOL COMPANY, INC.'s safety record compare to its industry?
- WHITNEY TOOL COMPANY, INC. operates in the cutting tool and machine tool accessory manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2.