Skip to main content

Establishment profile

WELDED RING PRODUCTS

2180 W. 114TH STREET, CLEVELAND, OH, 44102
336412Aircraft Engine and Engine Parts Manufacturing
EIN 341479265

Download as PDF →

OSHA inspections
6
over 52 years
Violations
30
$6,810 in penalties
Penalties
$6,810
$227 avg
Accident investigations on record
2 National Emphasis Program inspections · 1 OSHA follow-up

Summary

WELDED RING PRODUCTS has accumulated 30 OSHA violations across 6 inspections over 52 years of recorded history, with $6,810 in total assessed penalties.

The establishment sits in the 93rd percentile for violations within its industry-state peer group of 62 employers. Inspection frequency runs at the 92nd percentile. The most recent enforcement activity was recorded 18 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

WELDED RING PRODUCTS appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
6
0.1 / yr · last 52 yrs
Violations
30
0.6 / yr
Penalties
$6,810
$227 avg / violation
40% serious60% other
Inspection trigger · planned
3 of 6
Inspection trigger · complaint
1 of 6

83% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $6,810 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A03 II22$1,780Oct 1979Dec 2007
29 CFR 1910.0147 C0111$1,000Dec 2007Dec 2007
29 CFR 1910.1200 E0111$1,000Dec 2007Dec 2007
29 CFR 1910.0219 F0311$1,000Dec 2007Dec 2007
29 CFR 1910.0178 L01 I11$500Dec 2007Dec 2007
29 CFR 1910.0132 D0211$500Dec 2007Dec 2007
29 CFR 1910.0134 A0211$375Dec 2007Dec 2007
29 CFR 1910.0095 K0111$375Dec 2007Dec 2007
29 CFR 1910.0095 B0111$100Apr 1982Apr 1982
29 CFR 1910.0219 B0111$80Feb 1974Feb 1974
29 CFR 1910.0252 A02 IVC011$25Feb 1974Feb 1974
29 CFR 1910.0215 A0211$25Feb 1974Feb 1974
29 CFR 1910.0219 E01 I11$25Feb 1974Feb 1974
29 CFR 1910.0178 M1011$25Feb 1974Feb 1974
29 CFR 1910.0133 A0111Dec 2007Dec 2007
29 CFR 1910.0134 E0111Dec 2007Dec 2007
29 CFR 1910.0134 F0111Dec 2007Dec 2007
29 CFR 1910.0157 G0211Dec 2007Dec 2007
29 CFR 1910.0213 H0411Feb 1974Feb 1974
29 CFR 1910.0179 G02 II11Feb 1974Feb 1974

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

93rd

Worse on violations than most other employers in NAICS 3364 within OH. Peer group: 62 employers. This establishment has 30 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
57th
peer median: $4,821
Inspection frequency
92nd
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−0.6
TRIR
4.9
vs industry
+3.7

Reported for 47 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
1.2
BLS SOII 2024
Industry avg DART
0.6
BLS SOII 2024
Self-reported TRIR
4.9
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Complaint
1
Referral
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for WELDED RING PRODUCTS. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
18 years ago

No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for WELDED RING PRODUCTS. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for WELDED RING PRODUCTS. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for WELDED RING PRODUCTS. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for WELDED RING PRODUCTS. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for WELDED RING PRODUCTS. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
WELDED RING PRODUCTS CO
2180 WEST 114TH ST · CLEVELAND, OH, 44102
AirRCRANo Violation Identified00Oct 2011View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for WELDED RING PRODUCTS. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2007-12-10Referral44$750
2007-11-05Planned87$5,500
1983-03-22Follow-up0$0
1982-02-12Planned1$100
1979-10-18Complaint11$280
1974-02-07Planned16$180

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in aircraft engine and engine parts manufacturing within OH, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on WELDED RING PRODUCTS from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is WELDED RING PRODUCTS's OSHA violation history?
WELDED RING PRODUCTS has 6 OSHA inspections on record with 30 violations and $6,810 in total penalties.
How does WELDED RING PRODUCTS's safety record compare to its industry?
WELDED RING PRODUCTS operates in the aircraft engine and engine parts manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2. WELDED RING PRODUCTS's self-reported DART rate is 0 compared to an industry average of 0.6.