Establishment profile
VIKING DRILL AND TOOL, INC.
355 STATE STREET, ST PAUL, MN, 55165
Operated by Viking Drill& Tool, Inc · 1 of 3 establishments
333515 — Cutting Tool and Machine Tool Accessory Manufacturing
Summary
VIKING DRILL AND TOOL, INC. has accumulated 22 OSHA violations across 5 inspections over 53 years of recorded history, with $893 in total assessed penalties.
The establishment sits in the 95th percentile for violations within its industry-state peer group of 237 employers. Inspection frequency runs at the 83rd percentile. The most recent enforcement activity was recorded 22 years ago.
Federal records were found in 2 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
VIKING DRILL AND TOOL, INC. appears in OSHA workplace safety and NLRB labor relations records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
60% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within MN. Peer group: 237 employers. This establishment has 22 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 249 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for VIKING DRILL AND TOOL, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 22+ years. Most recent activity: 22 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for VIKING DRILL AND TOOL, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for VIKING DRILL AND TOOL, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
Company-level in MN — for Viking Drill& Tool, Inc, not this location alone
National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other Viking Drill& Tool, Inc locations in the same state.
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for VIKING DRILL AND TOOL, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for VIKING DRILL AND TOOL, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for VIKING DRILL AND TOOL, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2004-05-11 | Programmed Other | 0 | — | $0 | |
| 2004-03-18 | Planned | 1 | 1 | $420 | |
| 1988-11-09 | Follow-up | 0 | — | $0 | |
| 1988-09-19 | Planned | 11 | 1 | $228 | |
| 1972-12-19 | Complaint | 10 | — | $245 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
VIKING DRILL AND TOOL, INC. is one of 3 establishments rolled up under the parent organization Viking Drill& Tool, Inc.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Viking Drill& Tool, Inc across all 3 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in cutting tool and machine tool accessory manufacturing within MN, ordered by federal enforcement volume:
- VIKING DRILL AND TOOL INCSAINT PAUL — 3 federal enforcement records
- BONDHUS DELAWARE LLC DBA HUOT MANUFACTURINGSAINT PAUL — 2 federal enforcement records
- MTD ACQUISITION INCCHISHOLM — 2 federal enforcement records
- COMMAND TOOLING SYSTEMS LLCANOKA — 1 federal enforcement record
- TOOL GRINDING INCORPORATEDMINNEAPOLIS — 1 federal enforcement record
- MULTISOURCE MANUFACTURING LLC DBA DOUGLAS MFGBURNSVILLE — 1 federal enforcement record
- JET EDGE ACQUISITION LLCSAINT MICHAEL — 1 federal enforcement record
- TC/AMERICAN MONORAIL, DBA JET EDGEST MICHAEL — 1 federal enforcement record
- HYDRATIGHT OPERATIONS INCRED WING — 1 federal enforcement record
- CEDARBERG INDUSTRIES INCSAINT PAUL — 1 federal enforcement record
Other locations under this parent
Other establishments operated by Viking Drill& Tool, Inc, ordered by federal enforcement volume:
- VIKING DRILL & TOOL INCSt Paul, MN — 1 federal enforcement record
- VIKING DRILL & TOOLSt Paul, MN — 1 federal enforcement record
Related searches
- All Viking Drill& Tool, Inc locationsParent rollup
- Cutting Tool and Machine Tool Accessory ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Cutting Tool and in MNIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on VIKING DRILL AND TOOL, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Viking Drill& Tool, Inc, which operates 3 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is VIKING DRILL AND TOOL, INC.'s OSHA violation history?
- VIKING DRILL AND TOOL, INC. has 5 OSHA inspections on record with 22 violations and $893 in total penalties.
- How does VIKING DRILL AND TOOL, INC.'s safety record compare to its industry?
- VIKING DRILL AND TOOL, INC. operates in the cutting tool and machine tool accessory manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2. VIKING DRILL AND TOOL, INC.'s self-reported DART rate is 1.92 compared to an industry average of 0.5.