Establishment profile
UNIVERSAL MANUFACTURERS, INC
1711 KALANI ST, HONOLULU, HI, 96819
332510 — Hardware Manufacturing
Summary
UNIVERSAL MANUFACTURERS, INC has accumulated 36 OSHA violations across 6 inspections over 35 years of recorded history, with $3,438 in total assessed penalties.
The most recent federal enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
UNIVERSAL MANUFACTURERS, INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $3,438 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 8900.06 B01 | 2 | 2 | — | Jul 1995 | Oct 1996 |
| 29 CFR 6000.02 A03 | 2 | 1 | — | Jun 1991 | Jun 1991 |
| 29 CFR 8000.07 C02 AI | 1 | 1 | $900 | Oct 1996 | Oct 1996 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $700 | Jul 1995 | Jul 1995 |
| 29 CFR 8000.04 C01 | 1 | 1 | $700 | Jul 1995 | Jul 1995 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $438 | Jun 2006 | Jun 2006 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $438 | Jun 2006 | Jun 2006 |
| 29 CFR 1910.0134 E01 | 1 | 1 | $263 | Jun 2006 | Jun 2006 |
| 29 CFR 1910.0095 G06 | 1 | 1 | — | Jun 2006 | Jun 2006 |
| 29 CFR 1910.0095 C01 | 1 | 1 | — | Jun 2006 | Jun 2006 |
| 29 CFR 1910.0134 C01 | 1 | 1 | — | Jun 2006 | Jun 2006 |
| 29 CFR 1910.0134 K01 | 1 | 1 | — | Jun 2006 | Jun 2006 |
| 29 CFR 1910.0095 K01 | 1 | 1 | — | Jun 2006 | Jun 2006 |
| 29 CFR 1910.0134 F01 | 1 | 1 | — | Jun 2006 | Jun 2006 |
| 29 CFR 1910.0095 D01 | 1 | 1 | — | Jun 2006 | Jun 2006 |
| 29 CFR 8900.33 A02 B | 1 | 1 | — | Oct 1996 | Oct 1996 |
| 29 CFR 8900.06 G02 B | 1 | 1 | — | Oct 1996 | Oct 1996 |
| 29 CFR 8000.04 H06 | 1 | 1 | — | Jul 1995 | Jul 1995 |
| 29 CFR 8000.05 B10 | 1 | 1 | — | Jul 1995 | Jul 1995 |
| 29 CFR 8900.04 G02 A | 1 | 1 | — | Jul 1995 | Jul 1995 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for UNIVERSAL MANUFACTURERS, INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for UNIVERSAL MANUFACTURERS, INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for UNIVERSAL MANUFACTURERS, INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for UNIVERSAL MANUFACTURERS, INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for UNIVERSAL MANUFACTURERS, INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for UNIVERSAL MANUFACTURERS, INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for UNIVERSAL MANUFACTURERS, INC. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2006-03-28 | Planned | 10 | 3 | $1,138 | |
| 1996-09-25 | Planned | 4 | 1 | $900 | |
| 1995-07-11 | Referral | 0 | — | $0 | |
| 1995-06-19 | Planned | 17 | 4 | $1,400 | |
| 1991-06-20 | Follow-up | 0 | — | $0 | |
| 1991-06-03 | Planned | 5 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Hardware ManufacturingAll employers in this industry
- Employers in HIState-wide enforcement data
- Hardware Manufacturing in HIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on UNIVERSAL MANUFACTURERS, INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is UNIVERSAL MANUFACTURERS, INC's OSHA violation history?
- UNIVERSAL MANUFACTURERS, INC has 6 OSHA inspections on record with 36 violations and $3,437.5 in total penalties.
- How does UNIVERSAL MANUFACTURERS, INC's safety record compare to its industry?
- UNIVERSAL MANUFACTURERS, INC operates in the hardware manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.9.