Establishment profile
UNITED MACHINE WORKS INC.
1716 NC HWY. 903 N, GREENVILLE, NC, 27834
332710 — Machine Shops
Summary
UNITED MACHINE WORKS INC. has accumulated 8 OSHA violations across 2 inspections over 41 years of recorded history, with $1,155 in total assessed penalties.
The establishment sits in the 48th percentile for violations within its industry-state peer group of 172 employers. Inspection frequency runs at the 51st percentile. The most recent enforcement activity was recorded 21 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
UNITED MACHINE WORKS INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 8 distinct standards shown · 8 citations in this view · $1,155 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A02 | 1 | 1 | $735 | Dec 2004 | Dec 2004 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $263 | Dec 2004 | Dec 2004 |
| 29 CFR 1910.0133 A03 | 1 | 1 | $157 | Dec 2004 | Dec 2004 |
| 29 CFR 1910.0178 Q07 | 1 | 1 | — | Dec 2004 | Dec 2004 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Dec 2004 | Dec 2004 |
| 29 CFR 1910.0132 F01 | 1 | 1 | — | Dec 2004 | Dec 2004 |
| 29 CFR 1910.0178 L04 I | 1 | 1 | — | Dec 2004 | Dec 2004 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Mar 1985 | Mar 1985 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3327 within NC. Peer group: 172 employers. This establishment has 8 OSHA violations; peer median is 8.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for UNITED MACHINE WORKS INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for UNITED MACHINE WORKS INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 21+ years. Most recent activity: 21 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for UNITED MACHINE WORKS INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for UNITED MACHINE WORKS INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for UNITED MACHINE WORKS INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for UNITED MACHINE WORKS INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for UNITED MACHINE WORKS INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for UNITED MACHINE WORKS INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseT58 CONTAINER CHANGE KITcontract · Last action 2007-12-12$22,540
- Department of DefenseRIGGING SETcontract · Last action 2009-04-09$18,500
- Department of Defense8501377205!INSTALLATION TOOL NACELLEcontract · Last action 2014-09-18$16,000
- Department of DefenseTAGB BLAST COVERScontract · Last action 2011-04-15$11,150
- Department of DefenseMANUFACTURE H-46 RAMP PANEL DRILL JIGcontract · Last action 2008-04-01$10,800
- Department of DefensePOD HOUSING ASSEMBLYcontract · Last action 2010-04-02$8,590
- Department of Defense8501377678!ACCESSORY TOOL PROPROTOR V22contract · Last action 2014-09-18$8,400
- Department of DefenseEXTRACTOR ASSYcontract · Last action 2008-03-04$7,100
- Department of DefenseWRENCHcontract · Last action 2007-12-20$6,750
- Department of Defense8502128492!TOOL,FUEL SAMPLE,AIcontract · Last action 2015-06-24$6,450
- Department of DefenseAV-8 MLG RIGGING TOOL KITcontract · Last action 2007-10-04$6,450
- Department of DefenseFUEL SAMPLE TOOL, CH-53Econtract · Last action 2010-10-22$6,292
- Department of DefensePROFILE GAGEcontract · Last action 2010-03-03$5,600
- Department of DefensePOD ASSYcontract · Last action 2010-02-01$4,900
- Department of DefenseAV-8 MLG RIGGING TOOL KITcontract · Last action 2009-06-10$4,700
- Department of Defense8502317125!TOOL,FUEL SAMPLE,AIcontract · Last action 2015-09-28$4,675
- U.S. Agency for Global Mediacontract · Last action 2008-05-28$4,545
- Department of DefenseTORQUE SENSOR SHAFT RUN OUT FIXTUREcontract · Last action 2009-02-11$3,900
- Department of DefenseFIXTURE, METAL SPRAY YAW SHUTcontract · Last action 2008-02-15$3,580
- Department of DefenseFABRICATION OF CEREMONY FLAG STANDScontract · Last action 2009-08-14$3,500
- Department of DefenseMETAL SPRAY TEST BUTTON STRIPPING FIXTUREcontract · Last action 2009-03-11$3,500
- Department of DefenseTRANSMISSION LIFTING ADAPTERcontract · Last action 2008-04-14$2,890
- Department of DefenseWRENCH, SPANNERcontract · Last action 2012-08-03$2,690
- Department of DefenseMODIFICATION OF RIGGING TOOLcontract · Last action 2009-11-19$2,500
- Department of DefenseELA TEST FIXTUREcontract · Last action 2008-06-23$2,250
- Department of DefenseADAPTER, AIR INLETcontract · Last action 2007-11-06$1,050
- Department of DefenseHOLDING FIXTUREcontract · Last action 2012-06-21$845
- Department of DefenseECHO DRAIN FIXTUREcontract · Last action 2010-12-16$710
- Department of DefenseMODIFY GUIDE PINScontract · Last action 2008-05-06$500
- Department of DefenseDRILL JIGScontract · Last action 2009-02-26$320
Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2015-09-28. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2004-10-15 | Complaint | 7 | 7 | $1,155 | |
| 1985-03-01 | Planned | 1 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within NC, ordered by federal enforcement volume:
- TURNAMICS, INC.ASHEVILLE — 2 federal enforcement records
- BAITY'S PRECISION MACHINING, INC.ARDEN — 2 federal enforcement records
- UPCHURCH MACHINE CO., INC.CHARLOTTE — 2 federal enforcement records
- P & E MACHINE CO., INC.KANNAPOLIS — 1 federal enforcement record
- NASHVILLE WELDING - MACHINE WORKS, INC.WILSON — 1 federal enforcement record
- QUALITY CONTRACT MANUFACTURING, INCLOUISBURG — 1 federal enforcement record
- LANGLEY INDUSTRIAL MACHINING, INC.SHARPSBURG — 1 federal enforcement record
- REYNOLDA MANUFACTURING SOLUTIONS, INC.BURLINGTON — 1 federal enforcement record
- SUPERIOR MACHINE CO. OF SOUTH CAROLINA, INC.MARION — 1 federal enforcement record
- PETTY MACHINE COMPANY, INCORPORATEDGASTONIA — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in NCState-wide enforcement data
- Machine Shops in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on UNITED MACHINE WORKS INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is UNITED MACHINE WORKS INC.'s OSHA violation history?
- UNITED MACHINE WORKS INC. has 2 OSHA inspections on record with 8 violations and $1,155 in total penalties.
- How does UNITED MACHINE WORKS INC.'s safety record compare to its industry?
- UNITED MACHINE WORKS INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.