Skip to main content

Establishment profile

TULSA TUBE BENDING CO., INC.

4192 S. GALVESTON AVE., TULSA, OK, 74107
332996Fabricated Pipe and Pipe Fitting Manufacturing
EIN 730699949

Download as PDF →

OSHA inspections
5
over 28 years
Violations
6
$15,556 in penalties
Penalties
$15,556
$2,593 avg
Accident investigations on record
2 National Emphasis Program inspections

Summary

TULSA TUBE BENDING CO., INC. has accumulated 6 OSHA violations across 5 inspections over 28 years of recorded history, with $15,556 in total assessed penalties.

The establishment sits in the 85th percentile for violations within its industry-state peer group of 190 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 3 years ago.

Federal records were found in 1 of 16 sources. Sources without matching records returned empty for this establishment.

Agency coverage

TULSA TUBE BENDING CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFCCP federal contractor compliance, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, USAspending federal contracts, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls as of 2026-05-05. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
5
0.2 / yr · last 28 yrs
Violations
6
0.2 / yr
Penalties
$15,556
$2,593 avg / violation
Trend
STABLE
HIGH confidence
83% serious17% other
Inspection trigger · planned
4 of 5
Inspection trigger · referral
1 of 5

40% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Peer comparison

85th

Worse on violations than most other employers in NAICS 3329 within OK. Peer group: 190 employers. This establishment has 6 OSHA violations; peer median is 0.

Fewer violationsMore violations
Penalty percentile
94th
peer median: $0
Inspection frequency
98th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
6.3
vs industry
+5.2
TRIR
9.5
vs industry
+7.4

Reported for 64 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.1
BLS SOII 2024
Industry avg DART
1.1
BLS SOII 2024
Self-reported TRIR
9.5
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
4
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Dec 2022 – May 2025

Reports
3
Hospitalizations
2
Amputations
2
Eye losses
0

Most frequent event: Caught, entangled in running powered equipment normal operation

Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).

Severe injury reports — events

Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.

DateEventBody partOutcome
May 20, 2025Caught, entangled in running powered equipment normal operationFinger or thumb tip(s), nail(s)Amputation
Feb 27, 2025Struck by running powered equipment irregular movement, kick backFinger or thumb tip(s), nail(s)Amputation
Dec 13, 2022Struck by swinging or slipping object, other than handheld, n.e.c.BrainHospitalized

Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.

Activity timeline

Data refreshed
2026-05-05
First OSHA inspection
Most recent activity
3 years ago

No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page was last refreshed on 2026-05-05.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for TULSA TUBE BENDING CO., INC. as of 2026-05-05. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for TULSA TUBE BENDING CO., INC. as of 2026-05-05. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for TULSA TUBE BENDING CO., INC. as of 2026-05-05. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC)

No H-1B, H-2A, or H-2B labor condition applications on file for TULSA TUBE BENDING CO., INC. as of 2026-05-05. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for TULSA TUBE BENDING CO., INC. as of 2026-05-05. Verify directly with Environmental Protection Agency

Federal contracts (5-year)

No federal contract awards on file in the past 5 years for TULSA TUBE BENDING CO., INC. as of 2026-05-05. Verify directly with USAspending.gov

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TULSA TUBE BENDING CO., INC. as of 2026-05-05. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2022-12-14Referral43$10,938
2018-05-31Planned22$4,618
2014-09-10Planned0$0
2000-01-11Planned0$0
1997-08-27Planned0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in fabricated pipe and pipe fitting manufacturing within OK, ordered by federal enforcement volume:

Related searches

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

About this data

This profile aggregates federal enforcement records on TULSA TUBE BENDING CO., INC. from 16 federal data sources plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, USAspending federal contracts, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Frequently asked

What is TULSA TUBE BENDING CO., INC.'s OSHA violation history?
TULSA TUBE BENDING CO., INC. has 5 OSHA inspections on record with 6 violations and $15,556 in total penalties.
How does TULSA TUBE BENDING CO., INC.'s safety record compare to its industry?
TULSA TUBE BENDING CO., INC. operates in the fabricated pipe and pipe fitting manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.1. TULSA TUBE BENDING CO., INC.'s self-reported DART rate is 6.35 compared to an industry average of 1.1.