Skip to main content
FastDOL

Establishment profile

TRUSTY-COOK INC.

10530 E. 59TH STREET, INDIANAPOLIS, IN, 46236

Download as PDF →

OSHA inspections
1
over 28 years
Violations
8
$335 in penalties
Penalties
$335
$42 avg

Summary

TRUSTY-COOK INC. has accumulated 8 OSHA violations across 1 inspection over 28 years of recorded history, with $335 in total assessed penalties.

The establishment sits in the 80th percentile for violations within its industry-state peer group of 59,558 employers. The most recent enforcement activity was recorded 28 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

TRUSTY-COOK INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
1
0.0 / yr · last 28 yrs
Violations
8
0.3 / yr
Penalties
$335
$42 avg / violation
13% serious87% other
Inspection trigger · planned
1 of 1

100% of inspections at this establishment produced violations,

Peer comparison

80th

Worse on violations than most other employers. Peer group: 59,558 employers. This establishment has 8 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
77th
peer median: $0
Inspection frequency
0th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for TRUSTY-COOK INC.. Verify directly with OSHA Injury Tracking Application →

Inspection breakdown

Planned
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TRUSTY-COOK INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
28 years ago

No federal enforcement activity has been recorded against this establishment in 28+ years. Most recent activity: 28 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for TRUSTY-COOK INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for TRUSTY-COOK INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for TRUSTY-COOK INC.. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC)

No H-1B, H-2A, or H-2B labor condition applications on file for TRUSTY-COOK INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for TRUSTY-COOK INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TRUSTY-COOK INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$133K
Awards
415
Top agency
General Services Administration
$133K
Largest awards (top 50 of 415)
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2008-07-03
    $2,545
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2011-06-22
    $2,492
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2012-06-18
    $2,396
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2009-04-03
    $2,103
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2012-01-16
    $1,869
  • General Services Administration
    TAS::47 4534 001::TAS HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-10-14
    $1,692
  • General Services Administration
    TAS::47 4534 001::TAS HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-04-13
    $1,692
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2012-07-04
    $1,581
  • General Services Administration
    HAMMER, HAND: THE HAMMER SHALL BE A SOFT FACED, NON SPARKING DEAD BLOW HAMMER. HAMMER WEIGHT: 10 OU
    contract · Last action 2007-12-17
    $1,570
  • General Services Administration
    TAS::47 4534 001::TAS HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-09-23
    $1,533
  • General Services Administration
    HAMMER, HAND; MSP; 138
    contract · Last action 2007-10-10
    $1,527
  • General Services Administration
    DESCR N.A.
    contract · Last action 2009-03-05
    $1,517
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2009-01-20
    $1,452
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-03-04
    $1,427
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2009-10-02
    $1,374
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2009-03-04
    $1,352
  • General Services Administration
    HAMMER, HAND; MSP; 142
    contract · Last action 2007-10-02
    $1,346
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-01-20
    $1,322
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2011-08-26
    $1,294
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2008-07-09
    $1,273
  • General Services Administration
    TAS::47 4534 001::TAS HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-08-18
    $1,269
  • General Services Administration
    TAS::47 4534 001::TAS HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-06-15
    $1,269
  • General Services Administration
    HAMMER, HAND; MSP; 234
    contract · Last action 2008-04-08
    $1,228
  • General Services Administration
    TAS::47 4534 001::TAS HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-08-06
    $1,216
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-02-09
    $1,216
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2011-11-24
    $1,198
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2011-01-21
    $1,198
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2011-12-01
    $1,150
  • General Services Administration
    TAS::47 4534 001::TAS HAMMER, HAND: THE HAMMER SHALL BE A SOFT FACED, NON SPARKING DEAD BLOW HAMMER. HAMMER WEIGHT: 10 OUNCES, + 4 OUNCES, - 0 OUNCES. HANDLE MATERIAL : ONE PIECE URETHANE COATED WITH NO EXPOSED META L HEAD LENGTH: 3-1/8 INCHES +/- 1/16 INCH; FACE DIAMETER: 1.500 INCHES NOMINAL OVERALL LENGTH: 1 0-1/8 INCHES +/- 3/16 INCH; THE HAMMER SHALL HAV E FINE STEEL SHOT SEALED WITHIN UNITIZED METAL C ANISTER. THE UNDERLYING HANDLE MATERIAL SHALL BE STEEL AND SHALL BE TOP WELDED TO HEAD INSERT. T RUSTY-COOK PN 0, OR STANLEY PROTO PN 57-530, ARM STRONG TOOLS PN 69-530 OR EQUAL. (PARTIAL DESCRI PTION)
    contract · Last action 2010-07-28
    $1,134
  • General Services Administration
    HAMMER, HAND; MSP; 234
    contract · Last action 2007-12-17
    $1,084
  • General Services Administration
    HAMMER, HAND; MSP; 234
    contract · Last action 2009-06-03
    $1,011
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2011-05-06
    $1,006
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2008-06-10
    $967
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2008-11-24
    $952
  • General Services Administration
    TAS::97 4930::TAS HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-09-02
    $951
  • General Services Administration
    DESCR N.A.
    contract · Last action 2009-04-03
    $939
  • General Services Administration
    HAMMER,HAND SNAP-ON INC P/N: HBFE48
    contract · Last action 2011-02-22
    $926
  • General Services Administration
    TAS::47 4534 001::TAS HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-10-26
    $899
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-10-16
    $880
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2008-11-04
    $851
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2008-09-16
    $801
  • General Services Administration
    HAMMER, HAND; MSP; 234
    contract · Last action 2008-05-05
    $795
  • General Services Administration
    TAS::97 4930::TAS HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2010-08-23
    $793
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2012-06-18
    $767
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2008-05-20
    $764
  • General Services Administration
    HAMMER, HAND; MSP; 234
    contract · Last action 2009-08-28
    $722
  • General Services Administration
    HAMMER, HAND; MSP; 234
    contract · Last action 2008-09-23
    $722
  • General Services Administration
    HAMMER, HAND; MSP; 234
    contract · Last action 2008-09-04
    $722
  • General Services Administration
    PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MADE IN THE USA.
    contract · Last action 2011-04-21
    $719
  • General Services Administration
    HAMMER, HAND; SEE DESCRIPTION IN CONTRACT
    contract · Last action 2008-11-05
    $701

Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2015-07-08. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
1998-04-23Planned81$335

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

About this data

This profile aggregates federal enforcement records on TRUSTY-COOK INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Frequently asked

What is TRUSTY-COOK INC.'s OSHA violation history?
TRUSTY-COOK INC. has 1 OSHA inspection on record with 8 violations and $335 in total penalties.