Establishment profile
TRIMCO MASTER MILLWORKS
11501 CONFEDERATE, EL PASO, TX, 79936
238350 — Finish Carpentry Contractors
EIN 900341244
Summary
TRIMCO MASTER MILLWORKS has accumulated 11 OSHA violations across 4 inspections over 13 years of recorded history, with $8,750 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 4,726 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TRIMCO MASTER MILLWORKS appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 11 distinct standards shown · 11 citations in this view · $8,750 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0107 C02 | 1 | 1 | $1,750 | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0304 G05 | 1 | 1 | $1,500 | Jan 2013 | Jan 2013 |
| 29 CFR 1910.0303 G01 II | 1 | 1 | $1,500 | Jan 2013 | Jan 2013 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $1,500 | Jan 2013 | Jan 2013 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $1,000 | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0022 A01 | 1 | 1 | $500 | Jan 2013 | Jan 2013 |
| 29 CFR 1910.0037 A03 | 1 | 1 | $500 | Jan 2013 | Jan 2013 |
| 29 CFR 1910.0178 F01 | 1 | 1 | $500 | Jan 2013 | Jan 2013 |
| 29 CFR 1910.0107 M01 | 1 | 1 | — | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0107 D02 | 1 | 1 | — | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0107 C06 | 1 | 1 | — | Feb 2013 | Feb 2013 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 2383 within TX. Peer group: 4,726 employers. This establishment has 11 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 45 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TRIMCO MASTER MILLWORKS. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TRIMCO MASTER MILLWORKS. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TRIMCO MASTER MILLWORKS. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TRIMCO MASTER MILLWORKS. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TRIMCO MASTER MILLWORKS. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TRIMCO MASTER MILLWORKS. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TRIMCO MASTER MILLWORKS. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-10-01 | Planned | 0 | — | $0 | |
| 2014-03-05 | Follow-up | 0 | — | $0 | |
| 2012-09-20 | Referral | 5 | 5 | $2,750 | |
| 2012-08-08 | Planned | 6 | 3 | $6,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in finish carpentry contractors within TX, ordered by federal enforcement volume:
- TINK-A-TAKOSAN ANTONIO — 2 federal enforcement records
- NATIVE AMERICAN CONTRACTING LLCSAN ANTONIO — 2 federal enforcement records
- LUIS EDUARDO RODRIGUEZOVILLA — 1 federal enforcement record
- JUAN ORTIZFORT WORTH — 1 federal enforcement record
- HURRICANE CONSTRUCTIONHOUSTON — 1 federal enforcement record
- DANIEL PASILLAS MARTINEZFORT WORTH — 1 federal enforcement record
- HERIBERTO OCAMPOVENUS — 1 federal enforcement record
- BMP & ASSOCIATES INC.HOUSTON — 1 federal enforcement record
- APOLINAR HIDALGOMANSFIELD — 1 federal enforcement record
- FERNANDO GOMEZFORNEY — 1 federal enforcement record
Related searches
- Finish Carpentry ContractorsAll employers in this industry
- Employers in TXState-wide enforcement data
- Finish Carpentry Contractors in TXIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on TRIMCO MASTER MILLWORKS from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is TRIMCO MASTER MILLWORKS's OSHA violation history?
- TRIMCO MASTER MILLWORKS has 4 OSHA inspections on record with 11 violations and $8,750 in total penalties.
- How does TRIMCO MASTER MILLWORKS's safety record compare to its industry?
- TRIMCO MASTER MILLWORKS operates in the finish carpentry contractors industry. The industry average Total Recordable Incident Rate (TRIR) is 1.8. TRIMCO MASTER MILLWORKS's self-reported DART rate is 0 compared to an industry average of 1.3.