Establishment profile
THE MIDWEST TOOL & ENGINEERING COMPANY
112 WEBSTER ST., DAYTON, OH, 45402
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
THE MIDWEST TOOL & ENGINEERING COMPANY has accumulated 14 OSHA violations across 2 inspections over 16 years of recorded history, with $2,500 in total assessed penalties.
The establishment sits in the 77th percentile for violations within its industry-state peer group of 225 employers. Inspection frequency runs at the 52nd percentile. The most recent enforcement activity was recorded 15 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
THE MIDWEST TOOL & ENGINEERING COMPANY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 14 citations in this view · $2,500 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0217 C05 I | 1 | 1 | $250 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $250 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0147 C05 I | 1 | 1 | $250 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0147 D04 I | 1 | 1 | $250 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0147 D05 I | 1 | 1 | $250 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $250 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0217 C05 III | 1 | 1 | $250 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $250 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0217 B07 III | 1 | 1 | $250 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | $150 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0217 E01 II | 1 | 1 | $100 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0178 Q07 | 1 | 1 | — | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | — | Sep 2009 | Sep 2009 |
| 29 CFR 1904.0029 A | 1 | 1 | — | Sep 2009 | Sep 2009 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3335 within OH. Peer group: 225 employers. This establishment has 14 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for THE MIDWEST TOOL & ENGINEERING COMPANY. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for THE MIDWEST TOOL & ENGINEERING COMPANY. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 15+ years. Most recent activity: 15 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for THE MIDWEST TOOL & ENGINEERING COMPANY. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for THE MIDWEST TOOL & ENGINEERING COMPANY. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for THE MIDWEST TOOL & ENGINEERING COMPANY. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for THE MIDWEST TOOL & ENGINEERING COMPANY. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for THE MIDWEST TOOL & ENGINEERING COMPANY. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for THE MIDWEST TOOL & ENGINEERING COMPANY. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2011-01-20 | Monitoring | 0 | — | $0 | |
| 2009-07-16 | Planned | 14 | 11 | $2,500 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within OH, ordered by federal enforcement volume:
- SOLARTEC INC.SALEM — 2 federal enforcement records
- A&P TOOL, INC.HICKSVILLE — 2 federal enforcement records
- THE AKRON METAL ETCHING COMPANYAKRON — 1 federal enforcement record
- CAPITAL TOOL COMPANYCLEVELAND — 1 federal enforcement record
- NUMERICS UNLIMITED, INC.NEW CARLISLE — 1 federal enforcement record
- DIAMOND TOOL & DIE COMPANYDAYTON — 1 federal enforcement record
- CARTER MANUFACTURING CO. INCMASON — 1 federal enforcement record
- DELTA TOOL & DIE STEEL BLOCK CO.DELTA — 1 federal enforcement record
- L J MFG.MENTOR — 1 federal enforcement record
- WULCO, INC.CINCINNATI — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- Special Die and in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on THE MIDWEST TOOL & ENGINEERING COMPANY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is THE MIDWEST TOOL & ENGINEERING COMPANY's OSHA violation history?
- THE MIDWEST TOOL & ENGINEERING COMPANY has 2 OSHA inspections on record with 14 violations and $2,500 in total penalties.
- How does THE MIDWEST TOOL & ENGINEERING COMPANY's safety record compare to its industry?
- THE MIDWEST TOOL & ENGINEERING COMPANY operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.