Skip to main content
FastDOL

Establishment profile

THE COUNCIL TOOL COMPANY, INC.

345 PECAN LANE, LAKE WACCAMAW, NC, 28450

Download as PDF →

OSHA inspections
6
over 31 years
Violations
14
$1,275 in penalties
Penalties
$1,275
$91 avg

Summary

THE COUNCIL TOOL COMPANY, INC. has accumulated 14 OSHA violations across 6 inspections over 31 years of recorded history, with $1,275 in total assessed penalties.

The establishment sits in the 81st percentile for violations within its industry-state peer group of 38 employers. Inspection frequency runs at the 92nd percentile. The most recent enforcement activity was recorded 12 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

THE COUNCIL TOOL COMPANY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
6
0.2 / yr · last 31 yrs
Violations
14
0.5 / yr
Penalties
$1,275
$91 avg / violation
43% serious57% other
Inspection trigger · complaint
3 of 6
Inspection trigger · planned
3 of 6

67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 14 citations in this view · $1,275 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0305 B0111$875May 1995May 1995
29 CFR 1910.0213 C0111$80Apr 2001Apr 2001
29 CFR 1910.0334 A02 I11$80Apr 2001Apr 2001
29 CFR 1910.0253 E03 IIC211$80Apr 2001Apr 2001
29 CFR 1910.0304 F05 V11$80Apr 2001Apr 2001
29 CFR 1910.0212 A0111$80Apr 2001Apr 2001
29 CFR 1910.1200 F05 I11—Jun 1998Jun 1998
29 CFR 1910.0110 B06 VI11—Jun 1998Jun 1998
29 CFR 1910.0110 F02 I11—Jun 1998Jun 1998
29 CFR 1910.0242 B11—Jun 1998Jun 1998
29 CFR 1910.0157 G0111—May 1995May 1995
29 CFR 1910.0095 B0111—May 1995May 1995
29 CFR 1910.1200 E01 I11—May 1995May 1995
29 CFR 1910.0037 F0611—May 1995May 1995

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

81st

Worse on violations than most other employers in NAICS 3322 within NC. Peer group: 38 employers. This establishment has 14 OSHA violations; peer median is 6.

Fewer violationsMore violations
Penalty percentile
70th
peer median: $363
Inspection frequency
92nd
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for THE COUNCIL TOOL COMPANY, INC.. Verify directly with OSHA Injury Tracking Application →

Industry benchmark

Industry avg TRIR
2.5
BLS SOII 2024
Industry avg DART
1.4
BLS SOII 2024
Self-reported TRIR
—
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Complaint
3

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for THE COUNCIL TOOL COMPANY, INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
12 years ago

No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for THE COUNCIL TOOL COMPANY, INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for THE COUNCIL TOOL COMPANY, INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for THE COUNCIL TOOL COMPANY, INC.. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for THE COUNCIL TOOL COMPANY, INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for THE COUNCIL TOOL COMPANY, INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for THE COUNCIL TOOL COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$532K
Obligated (all-time)
$7.5M
Awards
683
Top agency
General Services Administration
$5.6M
Top agencies by obligation (this location)
General Services Administration$5.6M
Department of Defense$1.9M
Department of the Interior$6K
Largest awards (top 50 of 683)
  • Department of Defense
    8506837165!MATTOCK
    contract · Last action 2020-05-06
    $249,981
  • Department of Defense
    8508370120!MATTOCK
    contract · Last action 2022-04-26
    $233,376
  • Department of Defense
    8506090710!COMBINATION TOOL,FI
    contract · Last action 2019-04-03
    $210,040
  • Department of Defense
    8509044346!MATTOCK
    contract · Last action 2022-09-15
    $145,860
  • General Services Administration
    PULASKI TOOL IS AN ESSENTIAL BUSINESS ITEM IAW RFQ S-W-D1761-1 SIGNED BY JOSEPH MCSHANE ON 5/3/2011. DELIVERY IS 45 DAYS ARO. WAIVER OF FIRST ARTICLE WAS GRANTED. DELIVERY IS TO FRENCH CAMP, CA (S1).
    contract · Last action 2011-06-21
    $133,490
  • Department of Defense
    8504113555!MATTOCK
    contract · Last action 2017-02-14
    $131,550
  • Department of Defense
    4610027296!HANDLE,REPLACEMENT
    contract · Last action 2016-12-29
    $128,075
  • General Services Administration
    PULASKI TOOL IS AN ESSENTIAL BUSINESS ITEM FIRST ARTICLE SAMPLE (FAS) WAIVER WAS GRANTED BY THE TREVOR MAYNARD OF THE U.S. FOREST SERVICE SAN DIMAS TECHNOLOGY CENTER (SDTDC). DELIVERY IS 45 DAYS ARO. ALL TERMS AND CONDITIONS APPLY.
    contract · Last action 2011-07-13
    $114,420
  • General Services Administration
    PULASKI TOOL ESSENTIAL BUSINESS
    contract · Last action 2014-04-18
    $103,380
  • General Services Administration
    PULASKI TOOL ESSENTIAL BUSINESS
    contract · Last action 2013-12-17
    $103,380
  • General Services Administration
    PULASKI TOOL ESSENTIAL BUSINESS
    contract · Last action 2013-11-20
    $103,380
  • General Services Administration
    PULASKI TOOL IAW EMAIL CORRESPONDENCE DATED 6/13/08 BETWEEN COUNCIL AND GSA. A COPY OF THE COMPLETED
    contract · Last action 2008-06-17
    $99,994
  • General Services Administration
    PULASKI TOOL IAW RFQ S-W-DU659-2 DATED 3/18/08 AND IPD DATED 2/13/08. PLEASE NOTE THAT FIRST ARTICLE
    contract · Last action 2008-07-07
    $99,979
  • General Services Administration
    PULASKI TOOL IN ACCORDANCE WITH RFQ SWDU357-1 DATED 1/23/08 TERMS AND CONDITIONS AND IPD DATED 5/7/0
    contract · Last action 2008-01-31
    $99,979
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ART
    contract · Last action 2007-12-06
    $99,970
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-02-26
    $99,965
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-11-06
    $98,685
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-10-24
    $98,685
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636 WASTM D 5118&ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2013-12-11
    $96,300
  • General Services Administration
    ESSENTIAL BUSINESS -PULASKI TOOL WAIVER WAS APPROVED BY TREVOR MAYNARD ON 2/4/2013 BY THE SAN DIMAS TECHNOLOGY&DEVELOPMENT CENTER (STDC) RFQ WAS SIGNED AND QUOTED BY JOE MCSHANE ON 1/18/2013. DELIVERY IS 45 DAYS ARO. ALL TERMS AND CONDITIONS APPLY.
    contract · Last action 2013-02-25
    $90,550
  • Department of Defense
    8506090633!MATTOCK
    contract · Last action 2018-11-29
    $89,380
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636 WASTM D 5118&ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2012-12-12
    $88,560
  • Department of Defense
    8508761918!MATTOCK
    contract · Last action 2022-03-15
    $86,106
  • General Services Administration
    TAS::47 4534 001::TAS ESSENTIAL BUSINESS ITEM - PULASKI TOOL IAW RFQ S-W-D641-1 SIGNED ON 6/24/10 BY JOE MCSHANE. FIRST ARTICLE SAMPLES ARE DUE 30 DAYS AFTER NOTICE OF AWARD. DELIVERY IS 45 DAYS AFTER FIRST ARTICLE APPROVAL (AFAA). ALL TERMS AND CONDITIONS APPLY.
    contract · Last action 2010-09-06
    $85,040
  • Department of Defense
    8507976599!MATTOCK
    contract · Last action 2021-04-01
    $81,495
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636 WASTM D 5118&ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2013-01-29
    $76,857
  • Department of Defense
    8511098414!COMBINATION TOOL,FI
    contract · Last action 2025-04-23
    $65,820
  • Department of Defense
    8510436131!COMBINATION TOOL,FI
    contract · Last action 2024-02-09
    $65,820
  • General Services Administration
    PULASKI TOOL IS AN ESSENTIAL BUSINESS ITEM. FIRST ARTICLE SAMPLE (FAS) IS DUE 30 DAYS AFTER NOTICE OF AWARD. DELIVERY IS 45 DAYS AFTER FIRST ARTICLE APPROVAL. BJA
    contract · Last action 2013-07-29
    $65,474
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-02-19
    $61,090
  • Department of Defense
    8509119658!COMBINATION TOOL,FI
    contract · Last action 2022-09-15
    $59,840
  • Department of Defense
    8508497589!COMBINATION TOOL,FI
    contract · Last action 2022-03-15
    $59,840
  • Department of Defense
    8508361882!COMBINATION TOOL,FI
    contract · Last action 2021-11-17
    $59,840
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636 WASTM D 5118&ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2011-01-07
    $54,675
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636 WASTM D 5118&ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2012-03-06
    $54,022
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ART
    contract · Last action 2008-10-09
    $53,721
  • Department of Defense
    8510907744!MATTOCK
    contract · Last action 2024-09-20
    $53,480
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636WASTM D 5118 & ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2009-10-15
    $52,631
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ART
    contract · Last action 2008-11-06
    $51,183
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636 WASTM D 5118&ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2013-11-20
    $48,150
  • General Services Administration
    NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636 WASTM D 5118&ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2013-06-20
    $48,150
  • General Services Administration
    HAMMER, HAND SEE DESCRIPTION IN THE CONTRACT
    contract · Last action 2007-10-16
    $41,538
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-04-14
    $38,875
  • General Services Administration
    DESCR N.A.
    contract · Last action 2009-05-04
    $38,860
  • General Services Administration
    PULASKI TOOL ESSENTIAL BUSINESS
    contract · Last action 2014-02-24
    $37,906
  • General Services Administration
    TAS::47 4534 001::TAS NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636 WASTM D 5118&ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2010-12-07
    $37,616
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-12-05
    $37,608
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-12-18
    $37,374
  • General Services Administration
    TAS::47 4534 001::TAS NFES 1180, COMBINATION TOOL:IAW FOREST SERV SPEC 510-325A AND MEDC DRAWING 736 REVISION E. FIRST ARTICLE SAMPLE REQUIRED. PARA 3.3.4, " ONE COAT" PARA 4.2, REPLACE " MIL-STD-105" W/" ANSI/ASQC Z1.4" . PARA 5.2, REPLACE PPP-B-636 WASTM D 5118&ASTM D 1974. TEN TOOLS PACKED PER PARA 5.2 5100-325A. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.
    contract · Last action 2010-11-17
    $36,742
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-09-25
    $33,638

Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2025-08-13. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2014-05-09Planned0—$0
2004-07-09Complaint0—$0
2001-03-22Planned55$400
1998-06-08Planned4—$0
1995-03-21Complaint11$875
1995-03-21Complaint4—$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in this industry within NC, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on THE COUNCIL TOOL COMPANY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is THE COUNCIL TOOL COMPANY, INC.'s OSHA violation history?
THE COUNCIL TOOL COMPANY, INC. has 6 OSHA inspections on record with 14 violations and $1,275 in total penalties.