Skip to main content

Establishment profile

TENNESSEE GALVANIZING INC

1535 INDUSTRIAL BLVD, JASPER, TN, 37347
332812Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

Download as PDF →

OSHA inspections
12
over 32 years
Violations
31
$20,735 in penalties
Penalties
$20,735
$669 avg
Accident investigations on record
3 OSHA follow-ups

Summary

TENNESSEE GALVANIZING INC has accumulated 31 OSHA violations across 12 inspections over 32 years of recorded history, with $20,735 in total assessed penalties.

The establishment sits in the 81st percentile for violations within its industry-state peer group of 120 employers. Inspection frequency runs at the 96th percentile. The most recent enforcement activity was recorded 8 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

TENNESSEE GALVANIZING INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
12
0.4 / yr · last 32 yrs
Violations
31
1.0 / yr
Penalties
$20,735
$669 avg / violation
55% serious45% other
Inspection trigger · referral
6 of 12
Inspection trigger · planned
2 of 12

75% of inspections at this establishment produced violations, with 8 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $20,675 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0151 C33$2,800Nov 1994Oct 2002
29 CFR 1910.1200 F05 II22$200Feb 1999Oct 2002
29 CFR 1910.0023 C0311$5,400Oct 2002Oct 2002
29 CFR 1910.0179 N03 VI11$2,800Jan 2019Jan 2019
29 CFR 1910.0179 N04 I11$2,000Jan 2019Jan 2019
29 CFR 1910.0334 A02 I11$1,750Oct 2002Oct 2002
29 CFR 1910.1200 F05 I11$1,250Oct 2002Oct 2002
29 CFR 1910.1027 D01 I11$1,000Oct 2002Oct 2002
29 CFR 1910.0141 G0211$1,000Oct 2002Oct 2002
29 CFR 3000.327 B 311$500Oct 2002Oct 2002
29 CFR 1910.0095 I0311$375Aug 2018Aug 2018
29 CFR 1910.1025 H0111$300Oct 2002Oct 2002
29 CFR 1910.0134 K0611$250Aug 2018Aug 2018
29 CFR 1910.0132 A11$250Oct 2002Oct 2002
29 CFR 3000.604 A11$200Jun 1994Jun 1994
29 CFR 1910.1000 A0311$150Jan 1996Jan 1996
29 CFR 1910.0305 A01 I11$125Oct 2002Oct 2002
29 CFR 1910.0184 E0111$125Dec 1995Dec 1995
29 CFR 1910.0022 A0111$100Feb 1999Feb 1999
29 CFR 1910.0095 C0111$100Jun 1994Jun 1994

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

81st

Worse on violations than most other employers in NAICS 3328 within TN. Peer group: 120 employers. This establishment has 31 OSHA violations; peer median is 14.

Fewer violationsMore violations
Penalty percentile
94th
peer median: $1,800
Inspection frequency
96th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
6.8
vs industry
+3.7
TRIR
15.2
vs industry
+11.1

Reported for 118 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
3.1
BLS SOII 2024
Self-reported TRIR
15.2
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2
Complaint
1
Referral
6
Follow-up
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TENNESSEE GALVANIZING INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
8 years ago

No federal enforcement activity has been recorded against this establishment in 8+ years. Most recent activity: 8 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for TENNESSEE GALVANIZING INC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for TENNESSEE GALVANIZING INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for TENNESSEE GALVANIZING INC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TENNESSEE GALVANIZING INC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for TENNESSEE GALVANIZING INC. Verify directly with Environmental Protection Agency

Inspection history

DateTriggerViolationsSeriousPenalty
2018-07-13Referral33$4,800
2018-06-11Planned2$625
2003-06-17Monitoring0$0
2002-07-29Referral95$3,610
2002-07-17Referral63$9,775
1998-11-17Referral0$0
1998-09-24Referral31$1,100
1996-05-22Follow-up0$0
1995-10-24Planned21$125
1995-10-17Referral22$150
1994-08-09Follow-up11$250
1994-02-25Complaint31$300

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in metal coating, engraving (except jewelry and silverware), and allied services to manufacturers within TN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on TENNESSEE GALVANIZING INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is TENNESSEE GALVANIZING INC's OSHA violation history?
TENNESSEE GALVANIZING INC has 12 OSHA inspections on record with 31 violations and $20,735 in total penalties.
How does TENNESSEE GALVANIZING INC's safety record compare to its industry?
TENNESSEE GALVANIZING INC operates in the metal coating, engraving (except jewelry and silverware), and allied services to manufacturers industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. TENNESSEE GALVANIZING INC's self-reported DART rate is 6.77 compared to an industry average of 3.1.