Establishment profile
TECHNICAL MACHINING SERVICES, INC.
1201 N 8TH STREET, ROGERS, AR, 72756
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
EIN 710626245
Summary
TECHNICAL MACHINING SERVICES, INC. has accumulated 28 OSHA violations across 4 inspections over 12 years of recorded history, with $44,139 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 13 employers. Inspection frequency runs at the 92nd percentile. The most recent enforcement activity was recorded 5 years ago.
Federal records were found in 1 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TECHNICAL MACHINING SERVICES, INC. appears in OSHA workplace safety, FMCSA motor carrier registration, and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within AR. Peer group: 13 employers. This establishment has 28 OSHA violations; peer median is 0.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 81 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Mar 2016 – Mar 2021 · 1 in last 5 years
Most frequent event: Caught in running equipment or machinery during maintenance, cleaning
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Mar 18, 2021 | Caught in running equipment or machinery, n.e.c. | Hand(s), unspecified | Amputation | |
| Feb 7, 2020 | Caught in running equipment or machinery during maintenance, cleaning | Fingertip(s) | Amputation | |
| Mar 31, 2016 | Overexertion in lifting-multiple episodes | Abdomen, except internal location of diseases or disorders | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Mar 18, 2021 | Amputated,Amputation,Automatic Machine,Caught Between,Caught By,Caught In,Finger,Fingertip,Lockout/Tagout,Machine Guarding,Point Of Operation,Reaching In,Stamper,Tagout,Thumb | 1 | — | — | — |
| Feb 7, 2020 | Actuated,Amputated,Amputation,Clearing,Cut,Fingertip,Jammed,Machine operator,Welder | 1 | — | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 5+ years. Most recent activity: 5 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TECHNICAL MACHINING SERVICES, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TECHNICAL MACHINING SERVICES, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TECHNICAL MACHINING SERVICES, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for TECHNICAL MACHINING SERVICES, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TECHNICAL MACHINING SERVICES, INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TECHNICAL MACHINING SERVICES, INC.. Verify directly with UVA Corporate Prosecution Registry →
CPSC product recalls
Top hazard: The internal wiring in the LED downlights can contact the downlight's metal trim, posing a shock hazard to consumers.. Most recent recall: 2016-12-01. Source: Consumer Product Safety Commission, matched on company name.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2021-03-19 | Referral | 1 | 1 | $7,359 | |
| 2020-02-13 | Referral | 2 | 2 | $14,170 | |
| 2014-04-16 | Planned | 15 | 13 | $19,250 | |
| 2014-04-16 | Referral | 10 | 9 | $3,360 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within AR, ordered by federal enforcement volume:
- PEOPLE SOURCE STAFFING PROFESSIONALS, LLCROGERS — 1 federal enforcement record
- ADKO, INC.FORT SMITH — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in ARState-wide enforcement data
- Special Die and in ARIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on TECHNICAL MACHINING SERVICES, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is TECHNICAL MACHINING SERVICES, INC.'s OSHA violation history?
- TECHNICAL MACHINING SERVICES, INC. has 4 OSHA inspections on record with 28 violations and $44,139 in total penalties.
- How does TECHNICAL MACHINING SERVICES, INC.'s safety record compare to its industry?
- TECHNICAL MACHINING SERVICES, INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. TECHNICAL MACHINING SERVICES, INC.'s self-reported DART rate is 0 compared to an industry average of 1.4.