Establishment profile
AMERICAN TOOL AND MACHINE COMPANY
1910 SOUTH BENTON, SEARCY, AR, 72143
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
AMERICAN TOOL AND MACHINE COMPANY has accumulated 13 OSHA violations across 1 inspection over 23 years of recorded history, with $3,510 in total assessed penalties.
The establishment sits in the 91st percentile for violations within its industry-state peer group of 12 employers. The most recent enforcement activity was recorded 23 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
AMERICAN TOOL AND MACHINE COMPANY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 13 distinct standards shown · 13 citations in this view · $3,510 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0219 D01 | 1 | 1 | $450 | Jul 2003 | Jul 2003 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $450 | Jul 2003 | Jul 2003 |
| 29 CFR 1910.0243 C01 | 1 | 1 | $450 | Jul 2003 | Jul 2003 |
| 29 CFR 1910.0215 A01 | 1 | 1 | $450 | Jul 2003 | Jul 2003 |
| 29 CFR 1910.0217 B03 I | 1 | 1 | $450 | Jul 2003 | Jul 2003 |
| 29 CFR 1910.0217 B04 I | 1 | 1 | $450 | Jul 2003 | Jul 2003 |
| 29 CFR 1910.0212 A05 | 1 | 1 | $360 | Jul 2003 | Jul 2003 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $270 | Jul 2003 | Jul 2003 |
| 29 CFR 1904.0029 A | 1 | 1 | $180 | Jul 2003 | Jul 2003 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | Jul 2003 | Jul 2003 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Jul 2003 | Jul 2003 |
| 29 CFR 1910.1200 G01 | 1 | 1 | — | Jul 2003 | Jul 2003 |
| 29 CFR 1910.1200 H | 1 | 1 | — | Jul 2003 | Jul 2003 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within AR. Peer group: 12 employers. This establishment has 13 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for AMERICAN TOOL AND MACHINE COMPANY. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for AMERICAN TOOL AND MACHINE COMPANY. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 23+ years. Most recent activity: 23 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for AMERICAN TOOL AND MACHINE COMPANY. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for AMERICAN TOOL AND MACHINE COMPANY. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for AMERICAN TOOL AND MACHINE COMPANY. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for AMERICAN TOOL AND MACHINE COMPANY. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for AMERICAN TOOL AND MACHINE COMPANY. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2003-07-17 | Complaint | 13 | 9 | $3,510 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within AR, ordered by federal enforcement volume:
- TECHNICAL MACHINING SERVICES, INC.ROGERS — 1 federal enforcement record
- ADKO, INC.FORT SMITH — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in ARState-wide enforcement data
- Special Die and in ARIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on AMERICAN TOOL AND MACHINE COMPANY from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is AMERICAN TOOL AND MACHINE COMPANY's OSHA violation history?
- AMERICAN TOOL AND MACHINE COMPANY has 1 OSHA inspection on record with 13 violations and $3,510 in total penalties.
- How does AMERICAN TOOL AND MACHINE COMPANY's safety record compare to its industry?
- AMERICAN TOOL AND MACHINE COMPANY operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.