Establishment profile
STANLEY ENGINEERED FASTENING
1302 KERR DRIVE, DECORAH, IA, 52101
Operated by STANLEY BLACK & DECKER, INC · 1 of 182 establishments
332722 — Bolt, Nut, Screw, Rivet, and Washer Manufacturing
EIN 272811435
Summary
STANLEY ENGINEERED FASTENING has accumulated 5 OSHA violations across 4 inspections over 9 years of recorded history, with $11,025 in total assessed penalties.
The establishment sits in the 51st percentile for violations within its industry-state peer group of 99 employers. Inspection frequency runs at the 79th percentile. The most recent enforcement activity was recorded 10 months ago.
Federal records were found in 1 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
STANLEY ENGINEERED FASTENING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Peer comparison
Above average violations in NAICS 3327 within IA. Peer group: 99 employers. This establishment has 5 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 303 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for STANLEY ENGINEERED FASTENING. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Nov 30, 2018 | Amputated,Amputation,Chain,Finger,Fingertip,Pinched | 1 | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
Most recent federal enforcement activity recorded 10 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for STANLEY ENGINEERED FASTENING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for STANLEY ENGINEERED FASTENING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for STANLEY ENGINEERED FASTENING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for STANLEY ENGINEERED FASTENING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for STANLEY ENGINEERED FASTENING. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for STANLEY ENGINEERED FASTENING. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-07-24 | Referral | 1 | — | $3,840 | |
| 2019-01-16 | Referral | 2 | — | $4,935 | |
| 2017-12-19 | Complaint | 1 | — | $375 | |
| 2017-01-30 | Complaint | 1 | — | $1,875 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
STANLEY ENGINEERED FASTENING is one of 182 establishments rolled up under the parent organization STANLEY BLACK & DECKER, INC.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of STANLEY BLACK & DECKER, INC across all 182 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in bolt, nut, screw, rivet, and washer manufacturing within IA, ordered by federal enforcement volume:
- DW PRODUCTS CO.CEDAR RAPIDS — 1 federal enforcement record
- INFASTECH-DECORAH LLCDECORAH — 1 federal enforcement record
- AFCDES MOINES — 1 federal enforcement record
- WATERLOO SCREW MACHINE PRODUCTSWATERLOO — 1 federal enforcement record
Other locations under this parent
Other establishments operated by STANLEY BLACK & DECKER, INC, ordered by federal enforcement volume:
- SPECIALTY BAR PRODUCTS COMPANYBLAIRSVILLE, PA — 3 federal enforcement records
- NELSON STUD WELDING, INC.ELYRIA, OH — 3 federal enforcement records
- STANLEY ENGINEERED FASTENING LLCTROY, MI — 2 federal enforcement records
- VOSS INDUSTRIESTAYLOR, MI — 2 federal enforcement records
- NELSON STUD WELDING COLorain, OH — 2 federal enforcement records
- IDL TECHNIEDGE, LLCKENILWORTH, NJ — 2 federal enforcement records
- VOSS INDUSTRIES, LLCCLEVELAND, OH — 2 federal enforcement records
- STANLEY WORKS, HARDWARE DIVISIONNEW BRITAIN, CT — 2 federal enforcement records
- MTD PRODUCTS, INC.VERONA, MS — 2 federal enforcement records
- STANLEY ENGINEERED FASTENING LLCCHESTERFIELD, MI — 2 federal enforcement records
Related searches
- All STANLEY BLACK & DECKER, INC locationsParent rollup
- Bolt, Nut, Screw, Rivet, and Washer ManufacturingAll employers in this industry
- Employers in IAState-wide enforcement data
- Bolt, Nut, Screw, in IAIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on STANLEY ENGINEERED FASTENING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup STANLEY BLACK & DECKER, INC, which operates 182 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is STANLEY ENGINEERED FASTENING's OSHA violation history?
- STANLEY ENGINEERED FASTENING has 4 OSHA inspections on record with 5 violations and $11,025 in total penalties.
- How does STANLEY ENGINEERED FASTENING's safety record compare to its industry?
- STANLEY ENGINEERED FASTENING operates in the bolt, nut, screw, rivet, and washer manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.2. STANLEY ENGINEERED FASTENING's self-reported DART rate is 1.58 compared to an industry average of 1.2.