Establishment profile
MTD PRODUCTS INC.
680 LIVERPOOL DR., VALLEY CITY, OH, 44280
Operated by STANLEY BLACK & DECKER, INC · 1 of 182 establishments
326199 — All Other Plastics Product Manufacturing
EIN 341909912
Summary
MTD PRODUCTS INC. has accumulated 19 OSHA violations across 8 inspections over 52 years of recorded history, with $335 in total assessed penalties.
The establishment sits in the 85th percentile for violations within its industry-state peer group of 783 employers. Inspection frequency runs at the 96th percentile. The most recent enforcement activity was recorded 14 years ago.
Federal records were found in 2 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MTD PRODUCTS INC. appears in OSHA workplace safety, WHD wage enforcement, EPA environmental compliance, FMCSA motor carrier registration, and CPSC product recalls records only. No matching records were found in MSHA mine safety, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, or NHTSA vehicle recalls.
OSHA workplace safety
38% of inspections at this establishment produced violations,
Peer comparison
Worse on violations than most other employers in NAICS 3261 within OH. Peer group: 783 employers. This establishment has 19 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 357 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Aug 2020
Most frequent event: Jack-knifed or overturned, nonroadway
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Aug 5, 2020 | Jack-knifed or overturned, nonroadway | Upper and lower limb(s) | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
Department of Labor Wage & Hour Division — minimum-wage, overtime, child-labor, FMLA, and prevailing-wage enforcement.
Wage and hour breakdown by law
Per-statute totals across all closed DOL Wage & Hour cases against this employer. Backwages reflect amounts the agency assessed; civil penalty is the separate fine where applicable. Some acts (Davis-Bacon, SCA, CWHSSA, H-2B, CCPA) don't carry a civil penalty field in DOL's data. 1 statute · 110 violations · $266,488 in backwages
| Statute | Period | Cases | Violations | Workers | Backwages | Civil penalty |
|---|---|---|---|---|---|---|
| FLSA — minimum wage & overtime | May 2012 | 1 | 110 | 109 | $266,488 | — |
Source: DOL WHD enforcement database, aggregated per statute. Lifetime totals. A case can cite multiple statutes — so the total here may exceed the case count in the table above.
Wage and hour cases
Closed DOL Wage & Hour Division cases (FLSA, FMLA, H-2B, MSPA, and related statutes). Backwages reflect amounts the agency assessed; final payment may differ. 1 case · $266,488 in backwages · 109 workers affected
| Case period | Industry | Backwages | Workers |
|---|---|---|---|
| Jun 2010 – May 2012 | Outdoor Power Equipment Stores | $266,488 | 109 |
Source: DOL WHD enforcement database. Cases shown reflect those the agency has closed and made public.
Mine safety (MSHA)
No MSHA mine safety violations on file for MTD PRODUCTS INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MTD PRODUCTS INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for MTD PRODUCTS INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MTD PRODUCTS INC.. Verify directly with UVA Corporate Prosecution Registry →
CPSC product recalls
Top hazard: The riding mowers can fail to come to a complete stop and continue to move at a speed of about one mile per hour when the clutch/brake pedal is fully depressed, posing a low speed crash hazard.. Most recent recall: 2022-06-23. Source: Consumer Product Safety Commission, matched on company name.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2008-09-03 | Programmed Other | 0 | — | $0 | |
| 1974-10-08 | Complaint | 0 | — | $0 | |
| 1974-09-12 | Follow-up | 0 | — | $0 | |
| 1974-09-10 | Follow-up | 0 | — | $0 | |
| 1974-08-07 | Follow-up | 1 | — | $0 | |
| 1974-07-10 | Follow-up | 0 | — | $0 | |
| 1974-06-11 | Planned | 4 | — | $185 | |
| 1974-05-23 | Planned | 14 | — | $150 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
MTD PRODUCTS INC. is one of 182 establishments rolled up under the parent organization STANLEY BLACK & DECKER, INC.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of STANLEY BLACK & DECKER, INC across all 182 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in all other plastics product manufacturing within OH, ordered by federal enforcement volume:
- CONTINENTAL STRUCTURAL PLASTICS, INC.NORTH BALTIMORE — 3 federal enforcement records
- LEAR CORPORATIONHURON — 3 federal enforcement records
- LAFARGE NORTH AMERICACLEVELAND — 3 federal enforcement records
- CUSTOM PULTRUSIONS, INC.AURORA — 3 federal enforcement records
- OKAMOTO SANDUSKY MANUFACTURING, LLCSANDUSKY — 3 federal enforcement records
- CORE SYSTEMS INC.PAINESVILLE — 2 federal enforcement records
- PLASTIC PLATERS INC.CLEVELAND — 2 federal enforcement records
- CPTECHNOLOGIES, INC.BLACKLICK — 2 federal enforcement records
- GREENVILLE TECHNOLOGY, INC.GREENVILLE — 2 federal enforcement records
- CONTINENTAL STRUCTURAL PLASTICS, LLC.CAREY — 2 federal enforcement records
Other locations under this parent
Other establishments operated by STANLEY BLACK & DECKER, INC, ordered by federal enforcement volume:
- SPECIALTY BAR PRODUCTS COMPANYBLAIRSVILLE, PA — 3 federal enforcement records
- NELSON STUD WELDING, INC.ELYRIA, OH — 3 federal enforcement records
- STANLEY ENGINEERED FASTENING LLCTROY, MI — 2 federal enforcement records
- VOSS INDUSTRIESTAYLOR, MI — 2 federal enforcement records
- NELSON STUD WELDING COLorain, OH — 2 federal enforcement records
- IDL TECHNIEDGE, LLCKENILWORTH, NJ — 2 federal enforcement records
- VOSS INDUSTRIES, LLCCLEVELAND, OH — 2 federal enforcement records
- STANLEY WORKS, HARDWARE DIVISIONNEW BRITAIN, CT — 2 federal enforcement records
- MTD PRODUCTS, INC.VERONA, MS — 2 federal enforcement records
- STANLEY ENGINEERED FASTENING LLCCHESTERFIELD, MI — 2 federal enforcement records
Related searches
- All STANLEY BLACK & DECKER, INC locationsParent rollup
- All Other Plastics Product ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- All Other Plastics in OHIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on MTD PRODUCTS INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup STANLEY BLACK & DECKER, INC, which operates 182 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is MTD PRODUCTS INC.'s OSHA violation history?
- MTD PRODUCTS INC. has 8 OSHA inspections on record with 19 violations and $335 in total penalties.
- How does MTD PRODUCTS INC.'s safety record compare to its industry?
- MTD PRODUCTS INC. operates in the all other plastics product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. MTD PRODUCTS INC.'s self-reported DART rate is 4.34 compared to an industry average of 1.8.