Establishment profile
STANDARD TOOLS & EQUIPMENT CO.
4810 CLOVER ROAD, GREENSBORO, NC, 27405
Summary
STANDARD TOOLS & EQUIPMENT CO. has accumulated 72 OSHA violations across 8 inspections over 37 years of recorded history, with $3,450 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 98 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 16 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
STANDARD TOOLS & EQUIPMENT CO. appears in OSHA workplace safety, OFLC visa and labor certification (historical), and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
63% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 37 citations in this view · $3,450 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0106 D04 IV | 4 | 1 | — | Oct 1996 | Oct 1996 |
| 29 CFR 1910.0107 G03 | 3 | 2 | — | Oct 1996 | Jan 2006 |
| 29 CFR 1910.0106 D04 I | 3 | 1 | — | Oct 1996 | Oct 1996 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $600 | Oct 1996 | Jan 2006 |
| 29 CFR 1910.0107 B05 I | 2 | 2 | $250 | Oct 1996 | Dec 1996 |
| 29 CFR 9501.2901 | 2 | 1 | $200 | Oct 1996 | Oct 1996 |
| 29 CFR 1910.0242 B | 2 | 2 | — | Jan 2006 | Sep 2009 |
| 29 CFR 1910.0253 B04 III | 2 | 2 | — | Oct 1996 | Jan 2006 |
| 29 CFR 1910.0157 G01 | 2 | 2 | — | Oct 1996 | Jan 2006 |
| 29 CFR 1910.1200 E01 | 2 | 2 | — | Oct 1996 | Jan 2006 |
| 29 CFR 1910.0243 C03 | 2 | 2 | — | Oct 1996 | Jan 2006 |
| 29 CFR 1910.0215 B09 | 2 | 2 | — | Feb 1989 | Oct 1996 |
| 29 CFR 1910.0215 A04 | 2 | 2 | — | Feb 1989 | Oct 1996 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $900 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $600 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $600 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0107 E09 | 1 | 1 | $100 | Oct 1996 | Oct 1996 |
| 29 CFR 1910.0106 D04 III | 1 | 1 | $100 | Oct 1996 | Oct 1996 |
| 29 CFR 1910.0307 B | 1 | 1 | $100 | Oct 1996 | Oct 1996 |
| 29 CFR 1910.0305 G01 III | 1 | 1 | — | Sep 2009 | Sep 2009 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3332 within NC. Peer group: 98 employers. This establishment has 72 OSHA violations; peer median is 10.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for STANDARD TOOLS & EQUIPMENT CO.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for STANDARD TOOLS & EQUIPMENT CO.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 16+ years. Most recent activity: 16 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for STANDARD TOOLS & EQUIPMENT CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for STANDARD TOOLS & EQUIPMENT CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for STANDARD TOOLS & EQUIPMENT CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
Office of Foreign Labor Certification — labor condition applications for H-1B, H-2A, H-2B visa programs. Wage ratio = offered / prevailing wage. Historical data only: DOL ended OFLC Performance Data Disclosure publication in 2026, so the figures above reflect filings through the last ingested cycle and are not being refreshed. Treat as a historical snapshot, not a current signal.
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for STANDARD TOOLS & EQUIPMENT CO.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
STANDARD TOOLS & EQUIPMENT CO 4810 CLOVER RD · GREENSBORO, NC, 27405 | RCRA | No Violation Identified | 0 | 0 | — | Aug 1988 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for STANDARD TOOLS & EQUIPMENT CO.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefensePAINT BOOTHcontract · Last action 2011-07-20$12,519
- Department of DefenseDOWN DRAFT PAINT BOOTHcontract · Last action 2009-07-13$9,849
- Department of DefenseDUST COLLECTOR AND SHIPPINGcontract · Last action 2010-03-31$6,000
- Department of DefenseINDUSTRIAL PARTS BOOTHcontract · Last action 2009-10-01$4,694
- Department of JusticePAINT MIXERcontract · Last action 2008-09-08$3,378
- Department of DefenseOPEN FACED PAINT BOOTHcontract · Last action 2008-04-14$3,124
- Department of Veterans AffairsBENCH SPRAY BOOTH 3' 8" WIDEcontract · Last action 2008-03-26$2,309
Federal contract dollars to this establishment. Primary NAICS: 333319 - OTHER COMMERCIAL AND SERVICE INDUSTRY MACHINERY MANUFACTURING. Last action: 2011-07-20. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2009-08-12 | Planned | 4 | — | $0 | |
| 2005-12-08 | Planned | 25 | 4 | $2,700 | |
| 1999-08-11 | Planned | 0 | — | $0 | |
| 1999-04-26 | Planned | 0 | — | $0 | |
| 1996-10-04 | Referral | 5 | 3 | $250 | |
| 1996-09-23 | Complaint | 34 | 5 | $500 | |
| 1989-06-26 | Follow-up | 0 | — | $0 | |
| 1988-11-18 | Complaint | 4 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within NC, ordered by federal enforcement volume:
- BENTON'S RESTAURANT EQUIPMENT SALES, INC.PIKEVILLE — 1 federal enforcement record
- ABCO AUTOMATION, INC.BROWNS SUMMIT — 1 federal enforcement record
- ATI INDUSTRIAL AUTOMATION, INC.APEX — 1 federal enforcement record
- LCI CORPORATIONCHARLOTTE — 1 federal enforcement record
- J. C. STEELE AND SONS, INC.STATESVILLE — 1 federal enforcement record
- W.S. TYLER INC.GASTONIA — 1 federal enforcement record
- SUPERIOR DRY KILN INC. DBA BOLDESIGNSLENOIR — 1 federal enforcement record
- NORDSON XALOY, INC.HICKORY — 1 federal enforcement record
- CONDUSTRIAL INC.SANFORD — 0 federal enforcement records
Related searches
- NAICS 333All employers in this industry
- Employers in NCState-wide enforcement data
- Industry in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on STANDARD TOOLS & EQUIPMENT CO. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is STANDARD TOOLS & EQUIPMENT CO.'s OSHA violation history?
- STANDARD TOOLS & EQUIPMENT CO. has 8 OSHA inspections on record with 72 violations and $3,450 in total penalties.