Skip to main content

Establishment profile

ST JOHN WELDING & MANUFACTURING INC.

602 N. U.S. HWY. 281, SAINT JOHN, KS, 67576
811310Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Download as PDF →

OSHA inspections
5
over 25 years
Violations
18
$5,875 in penalties
Penalties
$5,875
$326 avg
Accident investigations on record
3 OSHA follow-ups

Summary

ST JOHN WELDING & MANUFACTURING INC. has accumulated 18 OSHA violations across 5 inspections over 25 years of recorded history, with $5,875 in total assessed penalties.

The establishment sits in the 100th percentile for violations within its industry-state peer group of 34 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 11 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ST JOHN WELDING & MANUFACTURING INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
5
0.2 / yr · last 25 yrs
Violations
18
0.7 / yr
Penalties
$5,875
$326 avg / violation
78% serious22% other
Inspection trigger · complaint
4 of 5

100% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 17 distinct standards shown · 18 citations in this view · $5,875 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.1200 E0122$1,025Sep 2000Mar 2015
29 CFR 1910.0132 D0111$800Mar 2015Mar 2015
29 CFR 1910.0132 E11$800Mar 2015Mar 2015
29 CFR 1910.0219 D0111$600Mar 2015Mar 2015
29 CFR 1910.0022 A0111$600Mar 2015Mar 2015
29 CFR 1910.0178 L01 I11$600Mar 2015Mar 2015
29 CFR 1903.0019 D0111$400Jun 2016Jun 2016
29 CFR 1910.0212 A0111$375Sep 2000Sep 2000
29 CFR 1910.0252 C02 I11$300Sep 2000Sep 2000
29 CFR 1910.0305 B0211$225Nov 2003Nov 2003
29 CFR 1910.0243 C0311$150Sep 2000Sep 2000
29 CFR 1910.0219 E0311Mar 2015Mar 2015
29 CFR 1910.0305 B02 I11Mar 2015Mar 2015
29 CFR 1910.0037 A0311Nov 2003Nov 2003
29 CFR 1910.1200 H0111Sep 2000Sep 2000
29 CFR 1910.1200 G0811Sep 2000Sep 2000
29 CFR 1910.0252 A02 IX11Sep 2000Sep 2000

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

100th

Worse on violations than nearly every other employer in NAICS 8113 within KS. Peer group: 34 employers. This establishment has 18 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
70th
peer median: $2,318
Inspection frequency
100th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for ST JOHN WELDING & MANUFACTURING INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
2.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Complaint
4

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ST JOHN WELDING & MANUFACTURING INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
11 years ago

No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ST JOHN WELDING & MANUFACTURING INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for ST JOHN WELDING & MANUFACTURING INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ST JOHN WELDING & MANUFACTURING INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ST JOHN WELDING & MANUFACTURING INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ST JOHN WELDING & MANUFACTURING INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ST JOHN WELDING & MANUFACTURING INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2015-01-29Complaint54$1,800
2015-01-29Unprogrammed Related43$2,800
2003-11-13Complaint21$225
2000-09-07Complaint54$525
2000-08-28Complaint22$525

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance within KS, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ST JOHN WELDING & MANUFACTURING INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ST JOHN WELDING & MANUFACTURING INC.'s OSHA violation history?
ST JOHN WELDING & MANUFACTURING INC. has 5 OSHA inspections on record with 18 violations and $5,875 in total penalties.
How does ST JOHN WELDING & MANUFACTURING INC.'s safety record compare to its industry?
ST JOHN WELDING & MANUFACTURING INC. operates in the commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance industry. The industry average Total Recordable Incident Rate (TRIR) is 2.4.