Establishment profile
SOUTH BEND FORM TOOL CO.
408 WEST INDIANA AVENUE, SOUTH BEND, IN, 46613
332710 — Machine Shops
Summary
SOUTH BEND FORM TOOL CO. has accumulated 23 OSHA violations across 4 inspections over 43 years of recorded history, with $4,170 in total assessed penalties.
The establishment sits in the 87th percentile for violations within its industry-state peer group of 174 employers. Inspection frequency runs at the 81st percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SOUTH BEND FORM TOOL CO. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 23 citations in this view · $4,170 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0219 D01 | 3 | 3 | $840 | May 1983 | Nov 2024 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $1,035 | Jul 2002 | Nov 2024 |
| 29 CFR 1910.0215 B09 | 2 | 2 | $225 | May 1983 | Jul 2002 |
| 29 CFR 4000.402 | 2 | 2 | — | May 1983 | Jun 1985 |
| 29 CFR 1910.0212 A05 | 1 | 1 | $585 | Nov 2024 | Nov 2024 |
| 29 CFR 1910.0215 B05 | 1 | 1 | $585 | Nov 2024 | Nov 2024 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $450 | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0304 F01 II | 1 | 1 | $450 | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | Nov 2024 | Nov 2024 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0303 B02 | 1 | 1 | — | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0305 B01 | 1 | 1 | — | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0305 G01 I | 1 | 1 | — | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0305 A01 I | 1 | 1 | — | Jun 1985 | Jun 1985 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | Jun 1985 | Jun 1985 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Jun 1985 | Jun 1985 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | — | May 1983 | May 1983 |
| 29 CFR 1910.0304 F05 V | 1 | 1 | — | May 1983 | May 1983 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within IN. Peer group: 174 employers. This establishment has 23 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for SOUTH BEND FORM TOOL CO.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SOUTH BEND FORM TOOL CO.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SOUTH BEND FORM TOOL CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SOUTH BEND FORM TOOL CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SOUTH BEND FORM TOOL CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SOUTH BEND FORM TOOL CO.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SOUTH BEND FORM TOOL CO.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SOUTH BEND FORM TOOL CO.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- General Services AdministrationPEEN,RIVETING UPPER: IAW HONEYWELL INTERNATIONAL INC. AEROSPACE DIVISION SOUTH PN: 2560623 ENDITEM: F-15 AIRCRAFT SUPPORT, 2558200 RIVET MACHINE (PARTIAL DESCRIPTION) REFERENCE P/N 2560623 REV. Econtract · Last action 2010-01-18$1,791
- General Services AdministrationPEEN,RIVETING UPPER: IAW HONEYWELL INTERNATIONAL INC. AEROSPACE DIVISION SOUTH PN: 2560623 ENDITEM: F-15 AIRCRAFT SUPPORT, 2558200 RIVET MACHINE (PARTIAL DESCRIPTION) REFERENCE QUOTATION NUMBER 17371 AND P/N 2560623 < < < < < < < < PLEASE EXPEDITE > > > > > > > >contract · Last action 2009-08-07$720
Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2010-01-18. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-08-08 | Planned | 5 | 5 | $2,535 | |
| 2002-07-02 | Planned | 8 | 1 | $1,575 | |
| 1985-06-07 | Planned | 5 | — | $60 | |
| 1983-05-12 | Planned | 5 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within IN, ordered by federal enforcement volume:
- AEROMET INDUSTRIES INC.GRIFFITH — 2 federal enforcement records
- TOTAL ENTERPRISES INCORPORATEDSOUTH BEND — 2 federal enforcement records
- BUSCHE ENTERPRISESALBION — 2 federal enforcement records
- MAJOR TOOL AND MACHINE INCINDIANAPOLIS — 2 federal enforcement records
- SUN ENGINEERING INCLAKE STATION — 1 federal enforcement record
- CUTTING EDGE MACHINE & TOOL INCNEW PARIS — 1 federal enforcement record
- CARDINAL CENTER INC.WARSAW — 1 federal enforcement record
- MARION ENGINEERING AND TECHNOLOGY INCMARION — 1 federal enforcement record
- HERALD MACHINE WORKS, INC.GARY — 1 federal enforcement record
- YOUNG MACHINE CO INCNEW ALBANY — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in INState-wide enforcement data
- Machine Shops in INIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SOUTH BEND FORM TOOL CO. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SOUTH BEND FORM TOOL CO.'s OSHA violation history?
- SOUTH BEND FORM TOOL CO. has 4 OSHA inspections on record with 23 violations and $4,170 in total penalties.
- How does SOUTH BEND FORM TOOL CO.'s safety record compare to its industry?
- SOUTH BEND FORM TOOL CO. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.