Establishment profile
SKYLAND TOOL AND MOLD, INC.
78 OLD SHOALS ROAD, ARDEN, NC, 28704
333511 — Industrial Mold Manufacturing
Summary
SKYLAND TOOL AND MOLD, INC. has accumulated 15 OSHA violations across 3 inspections over 41 years of recorded history, with $425 in total assessed penalties.
The establishment sits in the 67th percentile for violations within its industry-state peer group of 130 employers. Inspection frequency runs at the 64th percentile. The most recent enforcement activity was recorded 21 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SKYLAND TOOL AND MOLD, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 15 citations in this view · $425 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0179 K02 | 1 | 1 | $175 | May 2001 | May 2001 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $125 | May 2001 | May 2001 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $125 | May 2001 | May 2001 |
| 29 CFR 1910.0178 L | 1 | 1 | — | May 2001 | May 2001 |
| 29 CFR 1910.0179 J02 | 1 | 1 | — | May 2001 | May 2001 |
| 29 CFR 1910.0179 J03 | 1 | 1 | — | May 2001 | May 2001 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | — | May 2001 | May 2001 |
| 29 CFR 1910.0038 A01 | 1 | 1 | — | May 2001 | May 2001 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | May 2001 | May 2001 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | May 2001 | May 2001 |
| 29 CFR 1910.0037 Q01 | 1 | 1 | — | May 2001 | May 2001 |
| 29 CFR 1910.0304 F04 | 1 | 1 | — | Apr 1985 | Apr 1985 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Apr 1985 | Apr 1985 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Apr 1985 | Apr 1985 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Apr 1985 | Apr 1985 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3335 within NC. Peer group: 130 employers. This establishment has 15 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for SKYLAND TOOL AND MOLD, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SKYLAND TOOL AND MOLD, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 21+ years. Most recent activity: 21 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SKYLAND TOOL AND MOLD, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SKYLAND TOOL AND MOLD, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SKYLAND TOOL AND MOLD, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SKYLAND TOOL AND MOLD, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SKYLAND TOOL AND MOLD, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SKYLAND TOOL AND MOLD, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2005-06-21 | Planned | 0 | — | $0 | |
| 2001-04-18 | Planned | 11 | 6 | $425 | |
| 1985-03-26 | Planned | 4 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in industrial mold manufacturing within NC, ordered by federal enforcement volume:
- ALLIANCE-CAROLINA TOOL & MOLD CORPORATIONARDEN — 2 federal enforcement records
- HASCO AMERICA, INC.ARDEN — 1 federal enforcement record
- AMERITECH DIE & MOLD, INC.MOORESVILLE — 1 federal enforcement record
- SELECT MOLD SERVICES INC.FAYETTEVILLE — 1 federal enforcement record
- NORTHEAST TOOL AND MFG. COMPANYMATTHEWS — 1 federal enforcement record
- A & M TOOL INC.HORSE SHOE — 1 federal enforcement record
- EMERALD TOOL AND MOLD INCKERNERSVILLE — 1 federal enforcement record
- DIE-TECH, INCTHOMASVILLE — 1 federal enforcement record
- CUSTOM MACHINE & TOOLING, INC.GRAHAM — 1 federal enforcement record
- WAYNE WIRE DIE COMPANYCOLUMBUS — 1 federal enforcement record
Related searches
- Industrial Mold ManufacturingAll employers in this industry
- Employers in NCState-wide enforcement data
- Industrial Mold Manufacturing in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SKYLAND TOOL AND MOLD, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SKYLAND TOOL AND MOLD, INC.'s OSHA violation history?
- SKYLAND TOOL AND MOLD, INC. has 3 OSHA inspections on record with 15 violations and $425 in total penalties.
- How does SKYLAND TOOL AND MOLD, INC.'s safety record compare to its industry?
- SKYLAND TOOL AND MOLD, INC. operates in the industrial mold manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.1.